Electrochemical treatment of nitrate ions was attempted using different catalysts on the cathode in bioelectrochemical denitrification systems. The carbon cathode coated by biofilm (biocathode) could remove 91 % of nitrate ions at 1.0 V, which was almost same as the Pt-coated electrode (90 %). The exchange current density of biocathode was 0.0083 A/m(2), which was almost 22 times higher than with an abiotic plain carbon cathode. The formation of intermediate products in nitrate reduction varied depending on the cell voltage. At 0.5 V, a large portion of nitrate was converted to ammonia, but at more increased cell voltage (0.7 and 1 V) a high amount of nitrite ions was found with little ammonia formation in cathodic solution. The maximum nitrate removal rate was 0.204 mg NO(3)-N/cm(2)d by biocathode, while plain carbon paper showed only 0.176 mg NO(3)-N/cm(2)d. Electrochemical analysis of chronoamperometry showed a higher stable current generation for biocathode (3.1 mA) and Pt-coated cathode (2.8 mA) as compared to plain carbon (0.6 mA) at 0.7 V of poised voltage.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1007/s00449-012-0779-0 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Novel insights into released hydrochar particle derived from typical high nitrogen waste biomass: Special properties, microstructure and formation mechanism.
Waste Manag
December 2024
Key Laboratory of Agro-Environment in Downstream of Yangtze Plain/Scientific Observing and Experimental Station of Arable Land Conservation (Jiangsu), Ministry of Agriculture and Rural Affairs, Institute of Agricultural Resources and Environment, Jiangsu Academy of Agricultural Sciences, Nanjing 210014, China. Electronic address:
Article Synopsis
- Hydrothermal carbonization (HTC) transforms waste biomass, particularly high nitrogen feedstocks like kitchen garbage and blue-green algae, into valuable resources, but the characteristics of small hydrochar particles remain underexplored.
- Hydrochar particles show unique properties such as poor porosity, moderate pH, negative charge, and high hydrophobicity, which differ from the original hydrochar and secondary char derived from simpler biomasses.
- The study identifies complex formation mechanisms through various chemical reactions in the hydrochar microparticles, highlighting their potential as soil fertilizers and decontaminants while emphasizing that effectiveness is influenced by HTC temperature and type of biomass used.
Impact of compaction process on the carbon epoxy composite under varied environmental conditions.
Sci Rep
December 2024
Mechanical and Aerospace Engineering Department, United Arab Emirates University, 15551, Al Ain, United Arab Emirates.
Fibre-reinforced polymeric composites utilized in aerospace settings, experience varying environmental conditions throughout their operational lifespan. The major factors that can have adverse effects on their long-term performance are water and temperature. The present study investigates how the determinants such as water and temperature impact the structural integrity of plain weave woven carbon/epoxy laminated composites and further categorizing them into compacted and non-compacted groups.
View Article and Find Full Text PDFStrength and Poisson's ratio of fused filament fabrication parts made from carbon filler enhanced PEEK compounds at elevated temperatures.
Sci Rep
December 2024
School of Electrical Engineering, Aalto University, P.O. Box 15500, Aalto, FI-00076, Finland.
Engineering plastics are finding widespread applications across a broad temperature spectrum, with additive manufacturing (AM) having now become commonplace for producing aerospace-grade components from polymers. However, there is limited data available on the behavior of plastic AM parts exposed to elevated temperatures. This study focuses on investigating the tensile strength, tensile modulus and Poisson's ratio of parts manufactured using fused filament fabrication (FFF) and polyetheretherketone (PEEK) plastics doped with two additives: short carbon fibers (SCFs) and multi-wall carbon nanotubes (MWCNTs).
View Article and Find Full Text PDFSynergy and trade-off between plant functional traits enhance grassland multifunctionality under grazing exclusion in a semi-arid region.
J Environ Manage
December 2024
State Key Laboratory of Black Soils Conservation and Utilization, Northeast Institute of Geography and Agroecology, Chinese Academy of Sciences, Changchun, 130102, China.
Grazing exclusion is effective in restoring vegetation and ecological services in degraded grasslands within semi-arid regions. Variations in plant functional traits associated with the duration of grazing exclusion can indicate both ecological adaptability of plants and restoration processes of ecosystems. However, research on ecosystem multifunctionality (EMF) under grazing exclusion and restoration mechanisms mediated by plant functional traits is relatively limited.
View Article and Find Full Text PDFSpatiotemporal distributions, co-occurrence networks, and assembly mechanisms of the bacterial community in sediments of the Yangtze River: comprehensive insights into abundant and rare taxa.
Front Microbiol
December 2024
College of Water Sciences, Beijing Normal University, Beijing, China.
Sediments are key reservoirs for rare bacterial biospheres that provide broad ecological services and resilience in riverine ecosystems. Compared with planktons, there is a lack of knowledge regarding the ecological differences between abundant and rare taxa in benthic bacteria along a large river. Here, we offer comprehensive insights into the spatiotemporal distributions, co-occurrence networks, and assembly processes of three divided categories namely always rare taxa (ART), conditionally rare taxa (CRT), and conditionally rare and abundant taxa (CRAT) in sediments covering a distance of 4,300 km in the Yangtze River.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!