Cascading wafer-scale integrated graphene complementary inverters under ambient conditions.

Nano Lett

L-NESS, Department of Physics, Politecnico di Milano, Polo di Como, Via Anzani 42, 22100 Como, Italy.

Published: August 2012

The fundamental building blocks of digital electronics are logic gates which must be capable of cascading such that more complex logic functions can be realized. Here we demonstrate integrated graphene complementary inverters which operate with the same input and output voltage logic levels, thus allowing cascading. We obtain signal matching under ambient conditions with inverters fabricated from wafer-scale graphene grown by chemical vapor deposition (CVD). Monolayer graphene was incorporated in self-aligned field-effect transistors in which the top gate overlaps with the source and drain contacts. This results in full-channel gating and leads to the highest low-frequency voltage gain reported so far in top-gated CVD graphene devices operating in air ambient, A(v) ∼ -5. Such gain enabled logic inverters with the same voltage swing of 0.56 V at their input and output. Graphene inverters could find their way in realistic applications where high-speed operation is desired but power dissipation is not a concern, similar to emitter-coupled logic.

Download full-text PDF

Source
http://dx.doi.org/10.1021/nl301079rDOI Listing

Publication Analysis

Top Keywords

integrated graphene
8
graphene complementary
8
complementary inverters
8
ambient conditions
8
input output
8
graphene
6
inverters
5
logic
5
cascading wafer-scale
4
wafer-scale integrated
4

Similar Publications

Nosé-Hoover Integrators at-a-Glance: Barostat Integration Has a Demonstrable Effect on Uniaxial Tension Results of Solid Materials.

J Chem Theory Comput

January 2025

Mechanical and Industrial Engineering Department, Northeastern University, Boston, Massachusetts 02115, United States.

Molecular dynamics is a popular method for evaluating the tensile stress behaviors of many nanomaterials; however, few manuscripts include their thermostat and barostat damping parameters along with their methods. Here, we illustrate the demonstrable effect that barostat integration has on system dynamics during uniaxial testing under a Nosé-Hoover scheme. Three systems are tested: a 2D graphene sheet, a 3D continuous aluminum volume, and a 3D discontinuous polyvinyl alcohol volume.

View Article and Find Full Text PDF

This work aims to deal with the challenges associated with designing complementary bifunctional electrocatalysts and a separator/membrane that enables rechargeable zinc-air batteries (RZABs) with nearly solid-state operability. This solid-state RZAB was accomplished by integrating a bifunctional electrocatalyst based on Ru-RuO interface nanoparticles supported on nitrogen-doped (N-doped) graphene (Ru-RuO/NGr) and a dual-doped poly(acrylic acid) hydrogel (d-PAA) electrolyte soaked in KOH with sodium stannate additive. The catalyst shows enhanced activity and stability toward the two oxygen reactions, i.

View Article and Find Full Text PDF

Nanomembrane on Graphene: Delamination Dynamics and 3D Construction.

ACS Nano

January 2025

Department of Materials Science & International Institute of Intelligent Nanorobots and Nanosystems, State Key Laboratory of Surface Physics, Fudan University, Shanghai 200438, People's Republic of China.

Freestanding nanomembranes fabricated by lift-off technology have been widely utilized in microelectromechanical systems, soft electronics, and microrobotics. However, a conventional chemical etching strategy to eliminate nanomembrane adhesion often restricts material choice and compromises quality. Herein, we propose a nanomembrane-on-graphene strategy that leverages the weak van der Waals adhesion on graphene to achieve scalable and controllable release and 3D construction of nanomembranes.

View Article and Find Full Text PDF

Toward Fast-Charging and Dendritic-Free Li Growth on Natural Graphite Through Intercalation/Conversion on MoS Nanosheets.

Adv Mater

January 2025

Institute for Superconducting & Electronic Materials (ISEM), Faculty of Engineering and Information Sciences, University of Wollongong, Innovation Campus, Squires Way, North Wollongong, NSW, 2500, Australia.

During fast-charging, uneven lithium plating on the surface of commercial graphite anode impedes the electrochemical performance of lithium-ion batteries, causing a safety issue. The formation of a passivation layer, the solid-electrolyte interphase (SEI), due to side reactions with the organic electrolyte, correlates with long-term cycling performance under fast-charging conditions, necessitating comprehensive analysis. Herein, it is demonstrated that a molybdenum disulfide (MoS) coating on natural graphite (NG) modulates the properties of the SEI layer, enabling reduction of the charging time and the enhancement of long-term cycling performance.

View Article and Find Full Text PDF

Antiferromagnetic semimetal terahertz photodetectors enhanced through weak localization.

Nat Commun

January 2025

State Key Laboratory for Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Yutian Road 500, Shanghai, 200083, China.

Effective detection is critical for terahertz applications, yet it remains hindered by the unclear mechanisms that necessitate a deeper understanding of photosensitive materials with exotic physical phenomena. Here, we investigate the terahertz detection capabilities of the two-dimensional antiferromagnetic semimetal NbFeTe. Our study reveals that the interaction between antiferromagnetic magnetic moments and electron spin induces disordered carriers to hop between localized states, resulting in a nonlinear increase in responsivity as temperature decreases.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!