Background: The use of intraoperative fluoroscopy in orthopedic surgery involves frequent exposure to ionizing radiation in the operating room. Although a number of studies have found radiation exposure to orthopedic surgeons to be well below recommended doses, the long-term effects of low-dose radiation are not well known. Thus, all effective practical methods should be undertaken to reduce the exposure to radiation. Our purpose was to determine whether the use of a laser-aiming device improves the accuracy of intraoperative fluoroscopy to reduce, by implication, radiation exposure in the operating room.
Methods: From March to October 2004, there were 92 consecutive cases requiring use of fluoroscopy in the orthopedic foot and ankle service of the authors' institution. The number of accurate and inaccurate images with or without the presence of a radiology technician and a laser-aiming device were compared.
Results: The accuracy of imaging with the laser-aiming device was higher than the imaging without the device (p < 0.001). The accuracy of the images obtained by the surgeon was higher than the technicians' images when laser guidance was used (p= 0.027). There was no significant difference between the images obtained by the surgeon or the technicians when the aiming device was not used (p = 0.09).
Conclusion: The use of a laser-aiming device to help position during fluoroscopy is recommended in an effort to reduce radiation exposure in foot and ankle surgery.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.3113/FAI.2012.0415 | DOI Listing |
Ophthalmol Sci
March 2024
Department of Electro-Optics, Jerusalem College of Technology, Jerusalem, Israel.
Purpose: To evaluate the divergence between the neodymium-doped yttrium aluminum garnet (Nd:YAG) surgical laser and the aiming diode laser beams foci.
Design: Optical analysis and measurements were performed using a Volk Goldmann 3-mirror lens with a Nidek YC-1800 Nd:YAG laser apparatus.
Subjects: None.
BME Front
April 2024
Department of Biomedical Engineering, Johns Hopkins University, Baltimore, MD 21205, USA.
A clinically viable technology for comprehensive esophagus surveillance and potential treatment is lacking. Here, we report a novel multifunctional ablative gastrointestinal imaging capsule (MAGIC) technology platform to address this clinical need. The MAGIC technology could also facilitate the clinical translation and adoption of the tethered capsule endomicroscopy (TCE) technology.
View Article and Find Full Text PDFJt Dis Relat Surg
September 2020
Department of Orthopedics and Traumatology, Başkent University Adana Dr. Turgut Noyan Research and Application Center, Adana, Turkey.
Objectives: This study aims to introduce a new low-cost universal laser aiming device (LAD) that can be used in existing C-arm fluoroscopy devices, independent of brand and model, and to determine whether this new universal LAD improves technician accuracy in locating the desired region at the midpoint of the fluoroscopic image.
Materials And Methods: A low-priced universal LAD that is compatible with existing 12-inch C-arm fluoroscopy devices was designed. Eight radiology technicians with varied levels of experience in C-arm fluoroscopy participated in the study.
Mater Sci Eng C Mater Biol Appl
November 2019
CMEMS-UMinho, Universidade do Minho, Campus de Azurém, 4800-058 Guimarães, Portugal.
The development of smart biomedical implants with intrinsic communication system between sensors and actuators, or between implant and patient, remains a challenge for scientific community. Titanium and its alloys, especially Ti6Al4V, are the most used materials in the implant's fabrication. The present work is concerned with implant internal communication printing process and presents a detailed study on titanium alloy (Ti6Al4V) surface texturing and their characterization (morphological and chemical) produced by a Nd: YAG laser, aiming to create localized electrical insulation zones, necessary to accommodate electrical communication systems.
View Article and Find Full Text PDFAnnu Int Conf IEEE Eng Med Biol Soc
August 2016
Transoral Laser Microsurgeries (TLM) demand a great level of control and precision in intraoperative tissue manipulation. The optimal eradication of the diseased tissue is possible only with coordinated control of the laser aiming for incision and the microsurgical tools for orienting and stretching the tissue. However, the traditional microsurgical tools are long, single purpose, one degree-of-freedom (DOF), rigid tools with small range of motion and a normal grasping handle inducing non-ergonomic usage.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!