Degradation of ciprofloxacin by cryptomelane-type manganese(III/IV) oxides.

Environ Sci Pollut Res Int

Graduate Field of Environmental Toxicology, FSAD, HEB, Cornell University, Ithaca, NY 14853-4401, USA.

Published: January 2013

The objective of this study is to investigate and understand the oxidizing properties of a manganese oxide, specifically synthetic cryptomelane (KMn(8)O(16)) and its derivatives, in aqueous solution. Ciprofloxacin (CIP), a commonly used fluoroquinolone antibiotic, was used as the probe. Synthetic cryptomelane, known as octahedral molecular sieves (OMS-2), was synthesized, and its derivatives were prepared by adding transition metal oxides, V(2)O(5) or MoO(3), as dopants during synthesis. The solids were characterized by x-ray powder diffraction (XRD), SEM-energy-dispersive spectrometry (SEM-EDX), x-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectra (FTIR), Raman spectra, and N(2)-Brunauer-Emmett-Teller method. Degradation of CIP by different doped OMS-2 was carried out. Process conditions were optimized using response surface methodology (RSM). XRD patterns indicated the crystal phase of regular and doped OMS-2 as the cryptomelane type. Presence of the dopants in doped cryptomelane was confirmed by SEM-EDX and XPS. FTIR and Raman results suggested that the dopants were substituted into the framework in place of manganese. SEM images, XRD analysis, and surface area analysis of doped OMS-2 indicated decreased particle size, decreased crystallinity, and increased surface area compared to regular OMS-2. Higher oxidizing reactivity of doped OMS-2 was also observed with increased CIP removal rates from aqueous solution. The enhancement of reactivity may be due to the increase of surface areas. Nine percent Mo/OMS-2, the most effective oxidant of all synthesized derivatives, was selected for optimization study. Favorable treatment conditions were obtained using RSM at pH 3 with molar ratio [9 % Mo/OMS-2]/[CIP] ≥ 50. Under such conditions, more than 90 % CIP can be removed in 30 min. The degradation kinetics was modeled by a modified first order rate with introduction of a retardation factor-α (R (2) > 0.98). Analysis of degradation products indicated that oxidation takes place mainly on the piperazine ring of CIP.

Download full-text PDF

Source
http://dx.doi.org/10.1007/s11356-012-1026-6DOI Listing

Publication Analysis

Top Keywords

doped oms-2
16
synthetic cryptomelane
8
aqueous solution
8
synthesized derivatives
8
ftir raman
8
surface area
8
oms-2
6
cip
5
doped
5
degradation
4

Similar Publications

Highly active Mn-V-Co sites by cobalt doping on cryptomethane for enhanced catalytic decomposition of NO.

J Colloid Interface Sci

February 2025

Engineering Research Center of Ministry of Education for Fine Chemicals, Shanxi University, Taiyuan 030006, China.

Article Synopsis
  • Direct catalytic decomposition of NO (a greenhouse gas) shows promise, and researchers created cobalt-doped cryptomethane (OMS-2) catalysts using a simple sol-gel method for this purpose.
  • The Co-OMS-2 catalysts achieve 90% NO conversion at 398°C, thanks to a unique Mn-V-Co structure that enhances electron transfer and facilitates NO adsorption and activation.
  • However, while Co doping improves activity by lowering oxygen vacancy formation energy, too much Co leads to reduced active sites and poorer performance due to CoO formation; the primary reaction mechanism is Langmuir-Hinshelwood.
View Article and Find Full Text PDF

The data in this work provides the effect of aging temperature on manganese oxide allotropes prepared by hydrothermal method in the presence of boron dopant. The synthesized samples were labeled as B/MnO -100, B/MnO -150, and B/MnO -180 corresponding to the hydrothermal temperature at 100, 150, and 180 °C, respectively. X-ray diffraction (XRD) and inductively coupled plasma mass spectrometry (ICP-MS) methods were conducted to clarify the crystalline structure, as well as the amount of potassium, manganese, and boron elements in the three synthesized samples.

View Article and Find Full Text PDF

Efficient ozone decomposition in high humidity environments using novel iron-doped OMS-2-loaded activated carbon material.

Environ Sci Pollut Res Int

May 2024

School of Resources and Environmental Engineering, Jiangsu University of Technology, Changzhou, Jiangsu, 213001, People's Republic of China.

This study effectively addresses the rapid deactivation of manganese-based catalysts in humid environments during ozone decomposition by introducing iron-doped manganese oxide octahedral molecular sieve (Fe-OMS-2) catalysts supported on activated carbon (AC). By optimizing the doping ratio of Fe-OMS-2, the Fe-OMS-2/AC catalyst achieves nearly 100% ozone decomposition efficiency across a wide range of relative humidity levels (0 to 60%), even at elevated air flow rates of 800 L·g·h, outperforming standalone AC, Fe-OMS-2, or a simple mixture of OMS-2 and AC. The Fe-OMS-2/AC catalyst features a porous surface and a mesoporous structure, providing a substantial specific surface area that facilitates the uniform distribution of the Fe-OMS-2 active phase on the AC surface.

View Article and Find Full Text PDF

Enhancing CO catalytic oxidation performance over Cu-doping manganese oxide octahedral molecular sieves catalyst.

J Colloid Interface Sci

June 2024

State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 100084, China. Electronic address:

Article Synopsis
  • The study focuses on enhancing the catalytic activity for carbon monoxide (CO) oxidation by modifying manganese oxide octahedral molecular sieves (OMS-2) through defect engineering, specifically by adding copper (Cu).
  • The addition of Cu increased the specific surface area and pore volume, weakened Mn-O bonds, and altered the oxidation state of manganese, which led to a significant decrease in the energy required for the CO oxidation reaction.
  • Results indicated that this modification improved the CO oxidation activity at a lower temperature (148 °C compared to the original 215 °C), highlighting the effectiveness of the bimetallic synergy between manganese and copper in accelerating the reaction.
View Article and Find Full Text PDF

Highly Active and Water-Resistant Cu-Doped OMS-2 Catalysts for CO Oxidation: The Importance of the OMS-2 Synthesis Method and Cu Doping.

ACS Appl Mater Interfaces

December 2023

Key Laboratory for Green Chemical Process of Ministry of Education, Hubei Key Lab of Novel Reaction & Green Chemical Technology, School of Chemical Engineering and Pharmacy, Wuhan Institute of Technology, Wuhan 430205, China.

Porous cryptomelane-type Mn oxide (OMS-2) has an outstanding redox property, making it a highly desirable substitute for noble metal catalysts for CO oxidation, but its catalytic activity still needs to be improved, especially in the presence of water. Given the strong structure-performance correlation of OMS-2 for oxidation reactions, herein, OMS-2 is synthesized by solid state (OMS-2), reflux (OMS-2), and hydrothermal (OMS-2) methods, aiming to improve its CO oxidation performance through manipulating synthesis parameters to tailor its particle size, morphology, and crystallinity. Characterization shows that OMS-2 has the highest CO oxidation activity in the absence of water due to its low crystallinity, high specific surface area, large oxygen vacancy content, and good redox property, but the presence of water can greatly reduce its CO oxidation activity.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!