UV-visible Faraday rotators based on rare-earth fluoride single crystals: LiREF4 (RE = Tb, Dy, Ho, Er and Yb), PrF3 and CeF3.

Opt Express

Optical Single Crystal Group, Optical and Electronic Materials Unit, Environment and Energy Materials Research Division, National Institute for Materials Science, 1-1 Namiki, Tsukuba 305-0044, Japan.

Published: June 2012

High optical quality LiREF(4) (RE = Tb(3+), Dy(3+), Ho(3+), Er(3+) and Yb(3+)), PrF(3) and CeF(3) single crystals have been grown by the Czochralski technique. Their magneto-optical properties have been measured and analyzed in detail in the ultraviolet-visible wavelength region, and their figures of merit as Faraday rotators have been determined. CeF(3) presents superior properties above 300 nm, showing a figure of merit higher than that of the reference material, terbium-gallium-garnet, which is nowadays used in the visible-near infrared. PrF(3) is the best rotator for the 220-300 nm range. Towards shorter wavelength and in the vacuum ultraviolet, it is shown that the LiREF(4) crystals are unique rotators. Overall, the rare-earth fluoride single crystals studied here exhibit better properties than other materials considered so far, and therefore they have potential to cover the increasing demand for new and improved Faraday rotators in the ultraviolet-visible wavelength region.

Download full-text PDF

Source
http://dx.doi.org/10.1364/OE.20.014460DOI Listing

Publication Analysis

Top Keywords

faraday rotators
12
single crystals
12
rare-earth fluoride
8
fluoride single
8
prf3 cef3
8
ultraviolet-visible wavelength
8
wavelength region
8
uv-visible faraday
4
rotators
4
rotators based
4

Similar Publications

Rigid, conjugated molecules are excellent candidates as molecular wires since they can achieve full extension between electrodes while maintaining conjugation. Molecular design can be used to minimize the accessible pi surface and interactions between the bridging wire and the electrode. Polyynes are archetypal molecular wires that feature a rigid molecular framework with a cross-section of a single carbon atom.

View Article and Find Full Text PDF

Tuneable, variable, optical attenuation through an optical circulator with a broad, linear attenuation range of Δ ∼ (30-40) dB is demonstrated using non-reciprocal Faraday rotation in a double-pass configuration with a combination of permanent magnets and an electromagnet. A fiber-coupled magneto-optical variable optical attenuator (MVOA) operates over the near IR with an attenuation tuning range of Δ > 30 dB, a resolution of Δ ∼ 0.02 dB, a response time of  < 2 ms, and a temperature dependence over  = 25-70°C of Δ / Δ = -8 × 10 dB/°C.

View Article and Find Full Text PDF

We study experimentally the nonlinear mode coupling between circular polarizations in a vertical-cavity surface-emitting laser (VCSEL) device developed for spin injection. The specific experimental arrangement that includes a Faraday rotator enables laser oscillation on left-circular or right-circular polarization, by adjusting the cavity losses. We show the simultaneous oscillation of both polarizations never occurs, proving that the Lamb coupling constant is very close to 1 in this VCSEL device, a situation that is ideal for spintronic applications.

View Article and Find Full Text PDF

To design an innovative magneto-optical material aimed at a large Verdet constant coincides with the development trend of state-of-the-art modern optical devices. In this work, a magneto-optical transparent PrZrO ceramic with pyrochlore structure was successfully fabricated by vacuum sintering plus hydrogen reduction for the first time to our knowledge. The two- and three-dimensional images observed on the laser scanning confocal microscopy reveal that the grain-boundary dent depth of the polished PrZrO ceramic is only ∼1.

View Article and Find Full Text PDF
Article Synopsis
  • Modulating signals in spectroscopy helps reduce noise, but using optical modulators with broadband coherent light sources like optical frequency combs can complicate experiments.
  • This study introduces a new technique called broadband Faraday modulation rotation spectroscopy (FAMOS) that makes it easier to apply modulation by lowering the modulation frequency from tens of MHz to kHz.
  • The new method not only simplifies the setup but also enhances the signal-to-noise ratio by effectively managing low-frequency noise, leading to more accurate measurements in practical applications.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!