A compact laser transmitter, which takes advantage of an optical subassembly module, was proposed and demonstrated, providing precisely aligned collinear IR and visible beams. The collimated IR beam acts as a long-range projectile for simulated combat, carrying an optical pulsed signal, whereas the visible beam plays the role of tracking the IR beam. The proposed laser transmitter utilizes IR (λ(1)=905 nm) and visible (λ(2)=660 nm) light sources, a fiber-optic collimator, and a beam combiner, which includes a wavelength division multiplexing (WDM) filter in conjunction with optical fiber. The device was built via the laser welding technique and then evaluated by investigating the characteristics of the generated light beams. The IR collimated beam produced had a Gaussian profile and a divergence angle of ~1.3 mrad, and the visible monitoring beam was appropriately collimated to be readily discernible in the vicinity of the transmitter. The two beams were highly aligned within an angle of 0.004 deg as anticipated. Finally, we performed a practical outdoor field test to assess the IR beam with the help of a receiver. An effective trajectory was observed ranging up to 660 m with an overall detectable beam width of ~60 cm.

Download full-text PDF

Source
http://dx.doi.org/10.1364/AO.51.003936DOI Listing

Publication Analysis

Top Keywords

laser transmitter
12
beam
10
compact laser
8
visible beam
8
beams collimated
8
collimated beam
8
visible
5
transmitter
4
transmitter delivering
4
delivering long-range
4

Similar Publications

The most common transducers used to generate ultrasound in medical applications are based on short electrical pulses applied to piezoelectric transducers and capacitive micromachined ultrasound transducers. However, piezoelectric transducers have a limited frequency bandwidth, defined by their physical thickness, and capacitive micromachined ultrasound transducers have poor transmission efficiency. The high frequency cutoff limits the spatial resolution of ultrasonic images.

View Article and Find Full Text PDF

Microresonator frequency comb-based high-speed data transmission provides a pathway towards augmented data capacity without increasing the number of laser sources. Their use with intensity-modulated direct detection modulation (IMDD) formats is especially pertinent in data center communications where minimizing cost, latency and complexity is paramount. This however implies that the same extent of digital signal processing techniques commonly used in coherent detection for the management of fiber impairments including chromatic dispersion are not available.

View Article and Find Full Text PDF
Article Synopsis
  • High modulation formats like 64QAM and DFB lasers in backbone and metropolitan area networks suffer from performance issues due to equalization enhanced phase noise (EEPN).
  • Digital subcarrier multiplexing (DSCM) systems, while somewhat better at handling EEPN, still experience performance degradation, making EEPN mitigation algorithms crucial for effective digital signal processing (DSP).
  • A proposed solution involves a dual pilot tone-based algorithm that estimates laser phase noise, showing improved signal-to-noise ratio (SNR) results in simulations over long transmission distances compared to existing methods.
View Article and Find Full Text PDF
Article Synopsis
  • This paper examines how well a 100 Gb/s coherent passive optical network (PON) can handle laser phase noise using distributed feedback (DFB) lasers as local oscillators.
  • The study employs digitally subcarrier-multiplexed (DSCM) signals generated with Alamouti encoding, showing strong performance with power budgets of 34.2 dB and 33.9 dB over a 25 km fiber link, depending on the type of laser used.
  • Advanced digital signal processing techniques are utilized for phase noise compensation and frequency offset estimation, highlighting the importance of low-pass filter settings and pre-equalization for optimal system performance.
View Article and Find Full Text PDF

We demonstrate externally modulated widely tunable lasers co-integrated with semiconductor optical amplifiers (SOAs) heterogeneously integrated on silicon. The widely tunable laser enables continuous single-mode operation over a tuning range of approximately 40 nm, with a side-mode suppression ratio (SMSR) of at least 50 dB and an average waveguide-coupled optical power of 5 mW. The integrated electro-absorption modulator (EAM) exhibits an extinction ratio (ER) of 16 dB when reversed biased at -2 V.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!