A uniform monolayer of alkanethiol-protected gold nanoparticle arrays with ultrahigh density have been used as microcontact-printable charge-trapping layers for the application in flexible flash memories. The new devices are compared to two reference devices with a floating gate created by thermal evaporation and electrostatic self-assembly, and show a large memory window, long retention times and good endurance properties.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/adma.201201195 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Electrolyte chemistry towards ultra-high voltage (4.7 V) and ultra-wide temperature (-30 to 70 °C) LiCoO2 batteries.
Angew Chem Int Ed Engl
January 2025
South China Normal University, Chemistry, 55 W Zhongshan Rd, 510006, Guangzhou, CHINA.
LiCoO2 batteries for 3C electronics demand high charging voltage and wide operating temperature range, which are virtually impossible for existing electrolytes due to aggravated interfacial parasitic reactions and sluggish kinetics. Herein, we report an electrolyte design strategy based on a partially fluorinated ester solvent (i.e.
View Article and Find Full Text PDFIn-plane aligned doping pattern in electrospun PEI/MBene nanocomposites for high-temperature capacitive energy storage.
Mater Horiz
January 2025
State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, School of Electrical and Electronic Engineering, North China Electric Power University, Beijing 102206, China.
To achieve superior energy storage performance in dielectric polymer films, it is crucial to balance three key properties: high dielectric constant, high breakdown strength, and low dielectric loss. Here, we present the realization of ultrahigh efficiency and energy density in electrospun MBene/PEI composite films, achieved through an in-plane aligned doping pattern. The 1.
View Article and Find Full Text PDFIncreased Brightness and Reduced Efficiency Droop in Perovskite Quantum Dot Light-Emitting Diodes Using Carbazole-Based Phosphonic Acid Interface Modifiers.
ACS Nano
January 2025
Department of Chemistry, University of Washington, Seattle, Washington 98195, United States.
We demonstrate the use of [2-(9-carbazol-9-yl)ethyl]phosphonic acid (2PACz) and [2-(3,6-di--butyl-9-carbazol-9-yl)ethyl]phosphonic acid (-Bu-2PACz) as anode modification layers in metal-halide perovskite quantum dot light-emitting diodes (QLEDs). Compared to conventional QLED structures with PEDOT:PSS (poly(3,4-ethylenedioxythiophene) polystyrenesulfonate)/PVK (poly(9-vinylcarbazole)) hole-transport layers, the QLEDs made with phosphonic acid (PA)-modified indium tin oxide (ITO) anodes show an over seven-fold increase in brightness, achieving a brightness of 373,000 cd m, one of the highest brightnesses reported to date for colloidal perovskite QLEDs. Importantly, the onset of efficiency roll-off, or efficiency droop, occurs at ∼1000-fold higher current density for QLEDs made with PA-modified anodes compared to control QLEDs made with conventional PEDOT:PSS/PVK hole transport layers, allowing the devices to sustain significantly higher levels of external quantum efficiency at a brightness of >10 cd m.
View Article and Find Full Text PDFMOF-Derived Hierarchically Porous Carbon with Orthogonal Channels for Advanced Na-Se Batteries.
Small
January 2025
School of Materials Science and Engineering, South China University of Technology, Guangzhou, 510641, China.
Article Synopsis
- Na-Se batteries are promising alternatives to lithium-ion batteries due to their high capacity and natural abundance, but face challenges like volume expansion and polyselenide shuttling.
- The research introduces a novel Se/HPC (Se encapsulated in hierarchically porous carbon) that effectively contains Se, mitigates expansion issues, and enhances charge transfer, resulting in improved electrochemical performance.
- The study also highlights the beneficial Se─C bond for sodium adsorption and diffusion, suggesting future directions for designing advanced electrode materials using MOF-derived structures.
Precise Synthesis of 4.75 V-Tolerant LiCoO with Homogeneous Delithiation and Reduced Internal Strain.
J Am Chem Soc
January 2025
College of Engineering and Applied Sciences, Jiangsu Key Laboratory of Artificial Functional Materials, National Laboratory of Solid State Microstructures, Collaborative Innovation Centre of Advanced Microstructures, Nanjing University, Nanjing 210093, P. R. China.
The rapid advancements in 3C electronic devices necessitate an increase in the charge cutoff voltage of LiCoO to unlock a higher energy density that surpasses the currently available levels. However, the structural devastation and electrochemical decay of LiCoO are significantly exacerbated, particularly at ≥4.5 V, due to the stress concentration caused by more severe lattice expansion and shrinkage, coupled with heterogeneous Li intercalation/deintercalation reactions.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!