Three-dimensional (3D) urchin-like rutile TiO2 powders were synthesized by a mild hydrothermal method without any templates. An individual urchin-like TiO2 powder consists of self-assembled nanorods with a length of about 150 nm and width of about 10 nm. Additionally, the urchin-like TiO2 nanopowders were coated with an ultra-thin ZnO layer in order to modify the surface properties of the nanopowders, and the ZnO layer was confirmed by high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) analysis. The ZnO-modified TiO2 was used as a photoelectrode of a dye-sensitized solar cell (DSSC) and the solar cell performances were investigated. In comparison with bare TiO2, ZnO-modified TiO2 improved the photovoltaic performances, i.e., energy conversion efficiency, open circuit voltage, and short circuit current were increased. The higher DSSC performance of ZnO-modified TiO2 was attributed to its higher dye loading and lower charge recombination rate.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1166/jnn.2012.4635 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Aero-TiO three-dimensional nanoarchitecture for photocatalytic degradation of tetracycline.
Sci Rep
December 2024
Centre of Advanced Research in Bionanoconjugates and Biopolymers, "Petru Poni" Institute of Macromolecular Chemistry, 41A, Grigore Ghica Voda Alley, 700487, Iasi, Romania.
One of the biggest issues of wide bandgap semiconductor use in photocatalytic wastewater treatment is the reusability of the material and avoiding the contamination of water with the material itself. In this paper, we report on a novel TiO aeromaterial (aero-TiO) consisting of hollow microtetrapods with ZnTiO inclusions. Atomic layer deposition has been used to obtain particles of unique shape allowing them to interlock thereby protecting the photocatalyst from erosion and damage when incorporated in active filters.
View Article and Find Full Text PDFCharge Transfer Mechanism in Type II WO/CuO Heterostructure.
Nanomaterials (Basel)
December 2024
Laboratory of Photoactive Nanocomposite Materials, Saint Petersburg State University, 199034 Saint-Petersburg, Russia.
In this study, we explore the charge transfer mechanism between WO and CuO in heterostructured WO/CuO electrodes and in a WO||CuO tandem photoelectrochemical cell. The physical-chemical characterizations of the individual WO and CuO electrodes and the heterostructured WO/CuO electrode by XRD, XPS, and SEM methods confirm the successful formation of the target systems. The results of photoelectrochemical studies infer that in both the heterostructured WO/CuO electrode and WO||CuO tandem photoelectrochemical cell, the major mechanism of charge transfer between WO and CuO is a realization of the Z-scheme.
View Article and Find Full Text PDFElectrodeposition of Nanostructured Metals on n-Silicon and Insights into Rhodium Deposition.
Nanomaterials (Basel)
December 2024
Dipartimento di Chimica "Ugo Schiff", Università degli Studi di Firenze, Via della Lastruccia 3, 50019 Sesto Fiorentino, Italy.
In this study, we investigate the electrodeposition of various metals on silicon. Mn, Co, Ni, Ru, Pd, Rh, and Pt were identified as promising candidates for controlled electrodeposition onto silicon. Electrochemical evaluations employing cyclic voltammetry, Scanning Electron Microscopy (SEM) associated with energy-dispersive X-Ray Spectroscopy (SEM-EDS), and X-Ray Photoelectron Spectroscopy (XPS) techniques confirmed the deposition of Pd, Rh, and Pt as nanoparticles.
View Article and Find Full Text PDFStudy of Thermalization Mechanisms of Hot Carriers in BABr-Added MAPbBr for the Top Layer of Four-Junction Solar Cells.
Nanomaterials (Basel)
December 2024
School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Kensington, NSW 2052, Australia.
The hot carrier multi-junction solar cell (HCMJC) is an advanced-concept solar cell with a theoretical efficiency greater than 65%. It combines the advantages of hot carrier solar cells and multi-junction solar cells with higher power conversion efficiency (PCE). The thermalization coefficient () has been shown to slow down by an order of magnitude in low-dimensional structures, which will significantly improve PCE.
View Article and Find Full Text PDFA Numerical Simulation Study of the Impact of Kesterites Hole Transport Materials in Quantum Dot-Sensitized Solar Cells Using SCAPS-1D.
Nanomaterials (Basel)
December 2024
Fort Hare Institute of Technology, University of Fort Hare, Private Bag X1314, Alice 5700, Eastern Cape, South Africa.
Energy generation and storage are critical challenges for developing economies due to rising populations and limited access to clean energy resources. Fossil fuels, commonly used for energy production, are costly and contribute to environmental pollution through greenhouse gas emissions. Quantum dot-sensitized solar cells (QDSSCs) offer a promising alternative due to their stability, low cost, and high-power conversion efficiency (PCE) compared to other third-generation solar cells.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!