Ni(x)Co(100-x) (x = 0, 25, 50, 75, and 100) nanoparticles were uniformly in situ grown on reduced graphene oxide (RGO) nanosheets by a coreduction process for the first time. The as-synthesized products were characterized by X-ray powder diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), inductively coupled plasma optical emission spectrometry (ICP-OES), and transmission electron microscopy (TEM). It was found that RGO nanosheets can effectively prevent the aggregation of Ni(x)Co(100-x) nanoparticles. The size and morphology of the Ni(x)Co(100-x) nanoparticles on RGO nanosheets can be slightly adjusted by changing the Ni:Co atomic ratio. The magnetic properties of the RGO-Ni(x)Co(100-x) composites were investigated at 300 and 1.8 K, respectively. The results reveal that the composites have ferromagnetic characteristics and show composition dependent magnetic properties. In addition, these RGO-Ni(x)Co(100-x) nanocomposites also exhibit enhanced catalytic activities toward the reduction of 4-nitrophenol (4-NP) by NaBH(4) as compared with bare Ni(x)Co(100-x) alloy, and the RGO-Ni(25)Co(75) shows the highest catalytic activity among the obtained nanocomposites. This general and facile coreduction route can be extended to synthesize other alloy nanostructures on RGO nanosheets with various morphologies and functions, and provides a new opportunity for the application of graphene-based materials.

Download full-text PDF

Source
http://dx.doi.org/10.1021/am300310dDOI Listing

Publication Analysis

Top Keywords

rgo nanosheets
16
nixco100-x nanoparticles
12
reduced graphene
8
graphene oxide
8
magnetic properties
8
nixco100-x
5
nanosheets
5
situ growth
4
growth nixco100-x
4
nanoparticles
4

Similar Publications

Smart and advanced nanocomposites of rGO-based Ni-doped CoO/TiO for next-level photocatalysis and gas sensing application.

Environ Sci Pollut Res Int

December 2024

Advanced Materials Research Laboratory, Department of Physics, Dr. Babasaheb Ambedkar, Marathwada University, Chhatrapati Sambhajinagar, 431004, M.S, India.

The rGO-based 5% Ni-doped CoO/TiO (GNCT) p-n heterojunction nanocomposite was synthesized using hydrothermal method. The resulting nanocomposite's morphology, structure, surface area, elemental composition, electrical and optical properties were thoroughly examined using a variety of techniques. The GNCT nanomaterial achieved an impressive 99.

View Article and Find Full Text PDF

Nanocomposite films made from graphene oxide (GO) and MXene have a dense layered structure due to nanosheet self-stacking, limiting their dye adsorption performance. In this study, acid-base neutralization reactions are used to induce MXene/reduced graphene oxide (RGO) films bulging, which opens the stacked layer structure within the membrane and enhances MB adsorption performance. The effects of the pH, temperature, contact time, and initial concentration of MB on the adsorption performance are further investigated.

View Article and Find Full Text PDF

Ferrocene-decorated graphene nanosheets built by edge-to-face π-π interaction for room temperature ppb-level NO sensing.

Talanta

December 2024

National Center for International Research on Green Optoelectronics, Guangdong Provincial Key Laboratory of Optical Information Materials and Technology, Institute of Electronic Paper Displays, South China Academy of Advanced Optoelectronics, South China Normal University, Guangzhou, 510006, PR China. Electronic address:

The development of materials toward ppb-level nitric oxide (NO) sensing at room temperature remains in high demand for the monitoring of respiratory inflammatory diseases. In order to find an iron-containing molecule without steric hindrance to combine with graphene for room temperature NO gas sensing, here a supramolecular assembly of ferrocene (Fc) and reduced graphene oxide (rGO) was designed and prepared for NO sensing. The assembly of Fc/rGO was characterized using FT-IR, TEM, and XPS measurements.

View Article and Find Full Text PDF

A scalable, robust, and highly oriented flexible composite film inspired by a "brick-mortar" pillared structure for lithium ion batteries.

J Colloid Interface Sci

December 2024

Key Laboratory of Advanced Catalytic Materials and Technology, Advanced Catalysis and Green Manufacturing Collaborative Innovation Center, Changzhou University, Changzhou 213164, Jiangsu Province, China. Electronic address:

Macro-assembled silicon-based films can be taken into account as a possible anode material for the lithium ion batteries (LIBs) in portable electronics. However, most previously proposed preparation strategies are labor-intensive, intricate, and not appropriate for large-scale manufacturing. Herein, a multifunctional flexible silicon/carbon nanotube/reduced graphene oxide (Si/CNT/rGO) film was fabricated by one-step coating method based on the lyotropic nematic liquid crystals of graphene oxide (GO).

View Article and Find Full Text PDF

The relentless wear and friction of steel-based moving machinery have created ongoing challenges that hinder their industrial applications. One promising solution is the use of reduced graphene oxide (rGO) as a lubricant due to its excellent mechanical strength and promising tribological properties. However, its tendency to self-agglomerate presents a major hurdle for its practical use.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!