Antifouling surfaces are critical for the good performance of functional materials in various applications including water filtration, medical implants, and biosensors. In this study, we synthesized amphiphilic triblock terpolymers (tri-BCPs, coded as KB) and fabricated amphiphilic nanofibers by electrospinning of solutions prepared by mixing the KB with poly(lactic acid) (PLA) polymer. The resulting fibers with amphiphilic polymer groups exhibited superior antifouling performance to the fibers without such groups. The adsorption of bovine serum albumin (BSA) on the amphiphilic fibers was about 10-fold less than that on the control surfaces from PLA and PET fibers. With the increase of the KB content in the amphiphilic fibers, the resistance to adsorption of BSA was increased. BSA was released more easily from the surface of the amphiphilic fibers than from the surface of hydrophobic PLA or PET fibers. We have also investigated the structural conformation of KB in fibers before and after annealing by contact angle measurements, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and coarse-grained molecular dynamics (CGMD) simulation to probe the effect of amphiphilic chain conformation on antifouling. The results reveal that the amphiphilic KB was evenly distributed within as-spun hybrid fibers, while migrated toward the core from the fiber surface during thermal treatment, leading to the reduction in antifouling. This suggests that the antifouling effect of the amphiphilic fibers is greatly influenced by the arrangement of amphiphilic groups in the fibers.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/bm300327w | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Melt electrowriting of amorphous solid dispersions: Influence of drug and plasticizer on rheology and printing performance.
Int J Pharm
January 2025
Soft Matter Chemistry, Department of Chemistry, and Helsinki Institute of Sustainability Science, Faculty of Science, University of Helsinki, PB55 00014 Helsinki, Finland. Electronic address:
Drug loaded microfiber scaffolds have potential for sublingual drug delivery due to their fast dissolution time and tunable porosity. Such microfiber scaffolds can be prepared by melt electrowriting (MEW), wherein a polymer melt is electrostatically drawn out of a syringe onto a computer controlled moving collector. The fabrication of such scaffolds via MEW has previously been shown for a polymer with a glass transition temperature (T) just above room temperature, making handling challenging.
View Article and Find Full Text PDFA Regiospecific Co-Assembly Method to Functionalize Ordered Mesoporous Metal Oxides with Customizable Noble Metal Nanocrystals.
ACS Cent Sci
December 2024
Department of Chemistry, Shanghai Stomatological Hospital & School of Stomatology, State Key Laboratory of Molecular Engineering of Polymers, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Fudan University, Shanghai 200433, P. R. China.
An efficient regiospecific co-assembly (RSCA) strategy is developed for general synthesis of mesoporous metal oxides with pore walls precisely decorated by highly dispersed noble metal nanocrystals with customized parameters (diameter and composition). It features the rational utilization of the specific interactions between hydrophilic molecular precursors, hydrophobic noble metal nanocrystals, and amphiphilic block copolymers, to achieve regiospecific co-assembly as confirmed by molecular dynamics simulations. Through this RSCA strategy, we achieved a controllable synthesis of a variety of functional mesoporous metal oxide composites (e.
View Article and Find Full Text PDFDesign of Extruded Nanostructured Composites via Decoupling of the Cellulose Nanofibril/Poly(butylene adipate--terephthalate) Interface.
ACS Appl Mater Interfaces
January 2025
Department of Industrial and Materials Science, Chalmers University of Technology, SE-412 58 Gothenburg, Sweden.
The full exploitation of the outstanding mechanical properties of cellulose nanofibrils (CNFs) as potential reinforcements in nanocomposite materials is limited by the poor interactions at the CNF-polymer matrix interface. Within this work, tailor-made copolymers were designed to mediate the interface between CNFs and biodegradable poly(butylene adipate--terephthalate) (PBAT), and their effect on extruded nanocomposite performance was tested. For this purpose, two well-defined amphiphilic anchor-tail diblock copolymer structures were compared, with a fixed anchor block length and a large difference in the hydrophobic tail block length.
View Article and Find Full Text PDFHydrogel-based nonwoven with persistent porosity for whole-stage hypertonic wound healing by regulating of water vaporization enthalpy.
Biomaterials
May 2025
State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, 2999 North Renmin Road, Shanghai, 201620, China.
Moisture induced by wound exudate is crucial throughout the wound repair process. The dressing directly affects the absorption, permeation, and evaporation of the wound exudate. However, most dressings in clinical often result in excessive dryness or moisture of wound due to their monotonous structure and function, leading to ineffective thermodynamic control of evaporation enthalpy.
View Article and Find Full Text PDFCo-assembled supramolecular hydrogel of asiaticoside and Panax notoginseng saponins for enhanced wound healing.
Eur J Pharm Biopharm
December 2024
Chongqing Key Laboratory of Chinese Medicine New Drug Screening, Southwest University, Chongqing, China. Electronic address:
Article Synopsis
- Self-assembling natural drug hydrogels are gaining attention as effective drug delivery systems due to their biocompatibility and biodegradability.
- Asiaticoside (AS), derived from Centella asiatica, has beneficial properties for wound healing but suffers from poor water solubility, limiting its effectiveness.
- Combining AS with Panax notoginseng saponins (PNS) creates a hydrogel that enhances wound healing by reducing inflammation and promoting healthy tissue growth.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!