Objective: The aim of this study was to evaluate if pH-neutralization behavior of self-adhesive resin cements has an influence on their mechanical properties.

Methods: pH-neutralization, water sorption, solubility and flexural strength of G-Cem Automix (GCA), G CEM Capsules (GCC), Maxcem Elite (MCE), RelyX Unicem Clicker (RXC), RelyX Unicem Maxicap (RXM), RelyX Unicem 2 (RX2), and Speed-Cem (SPC) were tested in self-curing mode. Specimen's pH-values were recorded up to 24h with a pH-electrode. Water sorption (WS) and solubility (SO) were measured. Flexural strength (FS) was evaluated before and after thermocycling (TC) and fracture surfaces analyzed under SEM.

Results: RX2 (pH(24) 5.89), RXC (pH(24) 5.49) and SPC (pH(24) 5.42) showed highest 24h pH-values, followed by GCA (pH(24) 5.34). Capsulated products and MCE (pH(24) 3.90) reached lower pH-values. GCC (75.78 μg/mm(3)) showed the highest WS followed by MX (69.64 μg/mm(3)), RXM (64.76 μg/mm(3)), GCA (25.86 μg/mm(3)) and SPC (30.42μg/mm(3)). Capsulated products RXM (56.58 μg/mm(3)) and GCC (30.94 μg/mm(3)) presented the highest SO, GCA (4.06 μg/mm(3)) and SPC (4.26 μg/mm(3)) revealed the lowest. GCA (114.03 MPa) had the highest initial FS followed by SPC (79.81 MPa), RXM (41.61 MPa) the lowest. FS of all materials decreased significantly after TC except for RXC (44.65 MPa) and RX2 (65.92 MPa). FS of GCC (16.47 MPa) and MCE (28.21 MPa) decayed the most. A highly linear correlation was observed between percentage decrease of FS after TC and 24h pH-values (R(2)=0.861).

Significance: Within the limits of this study pH-neutralization behavior has an influence on mechanical stability. When using self-adhesive resin luting agents, automix-syringe products with improved pH-neutralization behavior should be favored.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.dental.2012.03.005DOI Listing

Publication Analysis

Top Keywords

influence mechanical
12
self-adhesive resin
12
ph-neutralization behavior
12
relyx unicem
12
resin luting
8
luting agents
8
water sorption
8
sorption solubility
8
flexural strength
8
24h ph-values
8

Similar Publications

Background: The Modified Nutritional Risk in Critically Ill (mNUTRIC) score has been proposed as a tool to identify hospitalized patients at risk for malnutrition who may benefit from early enteral nutrition (EN) therapy.

Objective: Our goal was to determine if mNUTRIC scores could predict, at time of intensive care unit admission, which mechanically ventilated trauma patients were at risk for malnutrition and might benefit from early EN, as indicated by reduced mortality.

Methods: We conducted a retrospective chart review of all adult trauma patients requiring mechanical ventilation for at least 48 hours between 01/21/2012 and 12/31/2016, reviewing inpatient medical records, demographic data, disease markers, injury severity, and comorbidities.

View Article and Find Full Text PDF

Background: Implant fixation is often the cornerstone of musculoskeletal surgical procedures performed to provide bony fixation and/or fusion. The aim of this study was to evaluate how different design features and manufacturing methods influence implant osseointegration and mechanical properties associated with fixation in a standardized model in cancellous bone of adult sheep.

Methods: We evaluated the performance of three titanium alloy implants: (A) iFuse-TORQ implant; (B) Fenestrated Sacroiliac Device; and (C) Standard Cancellous Bone Screw in the cancellous bone of the distal femur and proximal tibia in 8 sheep.

View Article and Find Full Text PDF

Morphological change in an isolated population of red squirrels () in Britain.

R Soc Open Sci

January 2025

Centre for Integrative Anatomy, Department of Cell and Developmental Biology, University College London, London WC1E 6BT, UK.

The mechanical properties of dietary items are known to influence skull morphology, either through evolution or by phenotypic plasticity. Here, we investigated the impact of supplementary feeding of peanuts on the morphology of red squirrels () from five populations in Britain (North Scotland, Borders, Jersey and two temporally distinct populations from Formby (Merseyside)). Stable isotope analysis confirmed dietary ecology in 58 specimens.

View Article and Find Full Text PDF

Cementless fixation in total joint arthroplasty: Factors impacting osseointegration.

J Clin Orthop Trauma

February 2025

Orthopedic Surgery, Brigham & Women's Hospital, Harvard University, Boston, MA, USA.

•The success of cementless fixation in TJA depends on a multitude of factors including biological, mechanical, implant, surgical, and material properties.•Biologic fixation has become the primary mode of fixation for the majority of primary total hip arthroplasty (THA) surgeries done today in the United States (US) due to its low complication rate and superior longevity compared to cemented fixation.•Cementless fixation has yet to gain wider acceptance in total knee arthroplasty (TKA) and hip hemiarthroplasty due to several factors including host bone quality, implant design, and surgical technique.

View Article and Find Full Text PDF

Peripheral nerve repair (PNR) is a major healthcare challenge due to the limited regenerative capacity of the nervous system, often leading to severe functional impairments. While nerve autografts are the gold standard, their implications are constrained by issues such as donor site morbidity and limited availability, necessitating innovative alternatives like nerve guidance conduits (NGCs). However, the inherently slow nerve growth rate (∼1 mm/day) and prolonged neuroinflammation, delay recovery even with the use of passive (no-conductive) NGCs, resulting in muscle atrophy and loss of locomotor function.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!