We have investigated the effect of mesoscopic fillers on the polymerization induced viscoelastic phase separation of thermoplastic modified thermosets at near- and off-critical concentrations using optical microscopy, time-resolved light scattering, dynamic mechanical analyses, and rheological instrument. Mesoscopic fillers including sepiolite and nanosized silica showed a significant enhancement effect in viscoelastic phase separation, and resulted in pronounced differences in the phase structures at all concentrations of polyetherimide modified epoxy resins with dynamic asymmetry. For blends near critical concentration, the introduction of fillers led to much finer phase structure with smaller characteristic length scale. At off-critical composition (i.e., blends with low concentration of slow dynamic component), the strong polymer chain entanglement resulted in enwrapped mesoscopic fillers within a slow dynamic phase. The rheological behavior of the blends clearly demonstrated the significant enhancement effect of mesoscopic fillers in the viscoelastic phase separation. The apparent activation energy of polymer chain mobility obtained from dynamic mechanical study of glass transition reflected strong wrapping behavior of polymer chains on mesoscopic fillers, which were consistent with the rheological and light scattering study.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/jp2105693 | DOI Listing |
Adv Mater
November 2024
State Key Laboratory of Organic Electronics and Information Displays & Institute of Advanced Materials (IAM), Nanjing University of Posts & Telecommunications, Nanjing, 210023, P. R. China.
Aqueous Zn battery is promising for grid-level energy storage due to its high safety and low cost, but dendrite growth and side reactions at the Zn metal anode hinder its development. Designing Zn with (002) orientation improves the stability of the Zn anode, yet grain boundaries remain susceptible to corrosion and dendrite growth. Addressing these intergranular issues is crucial for enhancing the electrochemical performance of (002)-textured Zn.
View Article and Find Full Text PDFJ Am Chem Soc
March 2024
Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai 200433, China.
Polymer-in-ceramic composite solid electrolytes (PIC-CSEs) provide important advantages over individual organic or inorganic solid electrolytes. In conventional PIC-CSEs, the ion conduction pathway is primarily confined to the ceramics, while the faster routes associated with the ceramic-polymer interface remain blocked. This challenge is associated with two key factors: (i) the difficulty in establishing extensive and uninterrupted ceramic-polymer interfaces due to ceramic aggregation; (ii) the ceramic-polymer interfaces are unresponsive to conducting ions because of their inherent incompatibility.
View Article and Find Full Text PDFMacromolecules
December 2023
Department of Energy, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129, Torino, Italy.
The development of nanocomposites relies on structure-property relations, which necessitate multiscale modeling approaches. This study presents a modeling framework that exploits mesoscopic models to predict the thermal and mechanical properties of nanocomposites starting from their molecular structure. In detail, mesoscopic models of polypropylene (PP)- and graphene-based nanofillers (graphene (Gr), graphene oxide (GO), and reduced graphene oxide (rGO)) are considered.
View Article and Find Full Text PDFSci Rep
May 2022
State Key Laboratory of Coal Resources and Safe Mining, China University of Mining and Technology, Xuzhou, China.
The irregular shape of gangue blocks will affect the coordination structure between blocks in the crushed gangue accumulation body, and then affect the engineering mechanical properties of crushed gangue in the process of load-bearing compression. In this paper, through CT scanning experiment, particle flow numerical simulation experiment, and comprehensive application of image processing, 3D reconstruction, FLAC/PFC continuum-discrete coupling technology, the gangue digital 3D model and the numerical model of crushed gangue particle flow under triaxial compression condition considering the real shape of the block were obtained. The microscopic fabric evolution law and macroscopic deformation response characteristics of crushed gangue considering triaxial compression condition and different confining pressures were studied.
View Article and Find Full Text PDFCarbohydr Polym
October 2020
Dipartimento di Fisica e Chimica, Università degli Studi di Palermo, Viale delle Scienze, pad. 17, 90128 Palermo, Italy; Consorzio Interuniversitario Nazionale per la Scienza e Tecnologia dei Materiali, INSTM, Via G. Giusti, 9, I-50121 Firenze, Italy. Electronic address:
Biopolymers as alternative to fossils-derived polymers are attracting the interest of researcher in material science. Besides the economic advantages, the sustainability makes polysaccharides ideal candidates to prepare films and formulations. The addition of Halloysite nanotubes as green inorganic fillers was exploited to improve the physico-chemical properties and to introduce smart response abilities to the material.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!