Effects of shape and stroke parameters on the propulsion performance of an axisymmetric swimmer.

Bioinspir Biomim

Department of Mechanical Engineering, University of Alaska Fairbanks, Fairbanks, AK 99775-5905, USA.

Published: March 2012

In nature, there exists a special group of aquatic animals which have an axisymmetric body and whose primary swimming mechanism is to use periodic body contractions to generate vortex rings in the surrounding fluid. Using jellyfish medusae as an example, this study develops a mathematical model of body kinematics of an axisymmetric swimmer and uses a computational approach to investigate the induced vortex wakes. Wake characteristics are identified for swimmers using jet propulsion and rowing, two mechanisms identified in previous studies of medusan propulsion. The parameter space of body kinematics is explored through four quantities: a measure of body shape, stroke amplitude, the ratio between body contraction duration and extension duration, and the pulsing frequency. The effects of these parameters on thrust, input power requirement and circulation production are quantified. Two metrics, cruising speed and energy cost of locomotion, are used to evaluate the propulsion performance. The study finds that a more prolate-shaped swimmer with larger stroke amplitudes is able to swim faster, but its cost of locomotion is also higher. In contrast, a more oblate-shaped swimmer with smaller stroke amplitudes uses less energy for its locomotion, but swims more slowly. Compared with symmetric strokes with equal durations of contraction and extension, faster bell contractions increase the swimming speed whereas faster bell extensions decrease it, but both require a larger energy input. This study shows that besides the well-studied correlations between medusan body shape and locomotion, stroke variables also affect the propulsion performance. It provides a framework for comparing the propulsion performance of axisymmetric swimmers based on their body kinematics when it is difficult to measure and analyze their wakes empirically. The knowledge from this study is also useful for the design of robotic swimmers that use axisymmetric body contractions for propulsion.

Download full-text PDF

Source
http://dx.doi.org/10.1088/1748-3182/7/1/016012DOI Listing

Publication Analysis

Top Keywords

propulsion performance
16
body kinematics
12
body
9
shape stroke
8
performance axisymmetric
8
axisymmetric swimmer
8
axisymmetric body
8
body contractions
8
body shape
8
cost locomotion
8

Similar Publications

Influence of prosthetic foot selection on walking performance during various load carriage conditions.

Clin Biomech (Bristol)

January 2025

Department of Veterans Affairs, Center for Limb Loss and MoBility, Seattle, WA, USA; Department of Mechanical Engineering, University of Washington, Seattle, WA, USA. Electronic address:

Background: Ambulatory individuals with lower limb amputations often face challenges with body support, body propulsion, and balance control. Carrying an infant, toddler, backpack, or other load can exacerbate these challenges and highlights the importance of prescribing the most suitable prosthetic foot. The aim of this study was to examine the influence of five different prosthetic feet on walking performance during various load carriage conditions.

View Article and Find Full Text PDF

Ensuring long-term wellbore integrity is critical for carbon dioxide geological storage. Ordinary Portland cement (PC) is usually used for wellbore primary cementing and plug operation, and set cement is easily corroded by acidic fluids, such as carbon dioxide, in underground high-temperature and high-pressure (HTHP) environments, resulting in a decrease in the mechanical properties and an increase in permeability. In order to achieve long-term wellbore integrity in a CO-rich environment This study introduces materials such as thermosetting vinyl ester resin (TSR), filler composite resin (FCR), and low-cost resin cement (RC).

View Article and Find Full Text PDF

Ammonium dinitramide (ADN) is a new green oxidant, which is a kind of high-energy ionic liquid and has been widely used in the field of liquid propulsion. When it is used in laser plasma propulsion, its poor absorption coefficient significantly limits its application. To address the issue, this paper investigates the effects of the content of the infrared dye and the laser energy density on the laser propulsion performance of an ADN-based liquid propellant.

View Article and Find Full Text PDF

Arm Propulsion in Front Crawl Stroke.

Sports (Basel)

January 2025

Department for Life Quality Studies, University of Bologna, 40100 Bologna, Italy.

: This study aims to determine the propulsive force and effective arm area contributed by the propulsion through the dynamic balance (power balance) between drag and propulsive power in swimming crawl performance. : Ten male swimmers participated in the study. The athletes conducted the crawl trials at a constant velocity using only the upper limbs.

View Article and Find Full Text PDF

Using bidirectional fluid-structure interaction technology, the dorsal-ventral motion of the dolphin tail fin was simulated, and the feasibility of the numerical simulation method was validated through underwater motion experiments. This study investigated the effects of structural parameters and motion modes of bionic dolphin tail fins on their propulsion performance. The results show that flexible tail fins can enhance propulsion performance.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!