AI Article Synopsis
- Self-Q-switched operation of an all-fiber laser was successfully demonstrated using erbium and samarium fibers.
- The laser produced stable pulses with an energy of 142 nJ and a duration of 450 ns.
- Experimental findings aligned closely with predictions from a numerical model based on rate equations.
Article Abstract
Self-Q-switched operation of the all-fiber laser using erbium and samarium fibers in the cavity is realized experimentally. This passively Q-switched all-fiber laser produces very stable pulses with energy of 142 nJ and duration of 450 ns. The experimental results were well reproduced by the results obtained through the numerical integration of a rate-equations model.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OL.37.000629 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Electronically Controlled Dual-Wavelength Switchable SRS Fiber Amplifier in the NIR-II Region for Multispectral Photoacoustic Microscopy.
Laser Photon Rev
October 2024
Harvard Medical School, Boston, MA 02114, USA; Wellman Center for Photomedicine, Massachusetts General Hospital, Boston, MA 02114, USA; Department of Cardiology, Erasmus Medical Center, Rotterdam GD3015, The Netherlands; Institute for Medical Engineering and Science, Massachusetts Institute of Technology, Cambridge, MA 02142, USA.
Photoacoustic microscopy (PAM) is a high-resolution and non-invasive imaging modality that provides optical absorption contrast. By employing dual- or multiple-wavelength excitation, PAM extends its capabilities to offer valuable spectroscopic information. To achieve efficient multispectral PAM imaging, an essential requirement is a light source characterized by a high repetition rate and switching rate, a ≈microjoule pulse energy, and a ≈nanosecond pulse duration.
View Article and Find Full Text PDFIn this Letter, we present an all-fiber bismuth (Bi)-doped germanosilicate fiber laser that is continuously tunable within the range of 1425-1475 nm, enabled by a tunable optical filter. A maximum output power of 86.4 mW was achieved at 1450 nm with a slope efficiency of 13.
View Article and Find Full Text PDFOpen-closed single-tube on-beam tuning-fork-enhanced fiber-optic photoacoustic spectroscopy.
Photoacoustics
October 2024
Wuhan National Laboratory for Optoelectronics (WNLO) and National Engineering Research Center of Next Generation Internet Access-system, School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan 430074, China.
A proof-of-concept on-beam tuning-fork-enhanced photoacoustic sensor based on an open-closed single-tube acoustic-microresonator (AmR) was proposed and investigated for the first time, to the best of our knowledge. Due to the high acoustic amplification effect, the open-closed AmR improved the detection sensitivity by 54 times with respect to the bare tuning fork (TF). Compared to traditional dual-tube/single-tube on-beam spectrophone configuration, the developed approach significantly facilitates the laser beam alignment and reduces the sensor size and gas consumption.
View Article and Find Full Text PDFFemtosecond Laser Introduced Cantilever Beam on Optical Fiber for Vibration Sensing.
Sensors (Basel)
November 2024
Hubei Key Laboratory of Optical Information and Pattern Recognition, Wuhan Institute of Technology, Wuhan 430205, China.
An all-fiber vibration sensor based on the Fabry-Perot interferometer (FPI) is proposed and experimentally evaluated in this study. The sensor is fabricated by introducing a Fabry-Perot cavity to the single-mode fiber using femtosecond laser ablation. The cavity and the tail act together as a cantilever beam, which can be used as a vibration receiver.
View Article and Find Full Text PDFEvanescent wave quartz-enhanced photoacoustic spectroscopy employing a side-polished fiber for methane sensing.
Photoacoustics
April 2024
Centre for Advanced Photonics and Process Analysis, Munster Technological University, Cork, T12 P928, Ireland.
We present an all-fiber-based laser gas analyzer (LGA) employing quartz-enhanced photoacoustic spectroscopy (QEPAS) and a side-polished fiber (SPF). The LGA comprises a custom quartz tuning fork (QTF) with 0.8 mm prong spacing, two acoustic micro-resonators (mR) located on either side of the prong spacing, and a single-mode fiber containing a 17 mm polished section passing through both mRs and QTF.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!