We investigate both optical and electrical properties of organic solar cells (OSCs) incorporating 2D periodic metallic back grating as an anode. Using a unified finite-difference approach, the multiphysics modeling framework for plasmonic OSCs is established to seamlessly connect the photon absorption with carrier transport and collection by solving the Maxwell's equations and semiconductor equations (Poisson, continuity, and drift-diffusion equations). Due to the excited surface plasmon resonance, the significantly nonuniform and extremely high exciton generation rate near the metallic grating are strongly confirmed by our theoretical model. Remarkably, the nonuniform exciton generation indeed does not induce more recombination loss or smaller open-circuit voltage compared to 1D multilayer standard OSC device. The increased open-circuit voltage and reduced recombination loss by the plasmonic OSC are attributed to direct hole collections at the metallic grating anode with a short transport path. The work provides an important multiphysics understanding for plasmonic organic photovoltaics.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OE.20.002572 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Stripe Noise Removal in Blazed Grating Generation for Electrically Tunable Beam Deflector.
Materials (Basel)
January 2025
Department of Information Display, Kyung Hee University, Seoul 02447, Republic of Korea.
In this paper, we demonstrate a blazed phase grating to achieve tunable beam steering and propose a novel algorithm to reduce the stripe noise in wrapped phase. To control the diffraction angle to steer light to the desired direction, an electrically tunable transmission-type beam deflector based on liquid crystals is introduced, and electric fields are applied to the patterned indium tin oxide electrodes to change its phase retardation. Two different 2π phase-wrapping methods are applied to obtain various diffraction angles within the minimum cell-gap, and the method of equal interval of phase achieves a worthwhile diffraction efficiency compared to the methods based on equal interval of diffraction angle.
View Article and Find Full Text PDFFiber Bragg Grating Thermometry and Post-Treatment Ablation Size Analysis of Radiofrequency Thermal Ablation on Ex Vivo Liver, Kidney and Lung.
Sensors (Basel)
January 2025
Department of Mechanical Engineering, Politecnico di Milano, Via Giuseppe La Masa 1, 20156 Milan, Italy.
Radiofrequency ablation (RFA) is a minimally invasive procedure that utilizes localized heat to treat tumors by inducing localized tissue thermal damage. The present study aimed to evaluate the temperature evolution and spatial distribution, ablation size, and reproducibility of ablation zones in ex vivo liver, kidney, and lung using a commercial device, i.e.
View Article and Find Full Text PDFMicrostructured Self-Healing Flexible Tactile Sensors Inspired by Bamboo Leaves.
ACS Appl Mater Interfaces
November 2024
State Key Laboratory of Power Transmission Equipment Technology, Chongqing University, Chongqing 400044, People's Republic of China.
Wearable electronic devices with multifunctions such as flexible, integrated, and self-powered play a crucial role in the fields of health monitoring, motion monitoring, and human-computer interaction. However, their core basic components, flexible pressure sensors, face challenges including poor long-term stability and insufficient real-time sensing accuracy. In order to solve the challenges of long-term, stable, and accurate sensing of the sensor, this paper prepares polydimethylsiloxane (SHPDMS) with intrinsic self-healing property and designs a high-sensitivity self-healing capacitive flexible pressure sensor with dual microstructures (grating microstructured electrodes and microporous dielectric layer) as the substrate based on SHPDMS.
View Article and Find Full Text PDFThe increasing structural complexity and downscaling of modern nanodevices require continuous development of structural characterization techniques that support R&D and manufacturing processes. This work explores the capability of laboratory characterization of periodic planar nanostructures using 3D X-ray standing waves as a promising method for reconstructing atomic profiles of planar nanostructures. The non-destructive nature of this metrology technique makes it highly versatile and particularly suitable for studying various types of samples.
View Article and Find Full Text PDFSolid-state electrochemical oxidation with polyelectrolyte membrane stamps for micro-/nanoscale pattern formation on Au surfaces.
Nanoscale
October 2024
Department of Mechanical Engineering, Ritsumeikan University, Kusatsu, Shiga, Japan.
Nanoscale-patterned Au surfaces are promising for a wide range of applications from bio/chemical sensors to high-performance electrodes. However, pattern formation using conventional resist-based methods is complex, expensive, and environmentally unfriendly. Herein, we report a novel approach for pattern formation on Au surfaces using solid-state electrochemical treatment with polymer electrolyte membrane (PEM) stamps.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!