Adsorption is a promising technique for decolorization of effluents of textile dyeing industries but its application is limited due to requirement of high amounts of adsorbent required. The objective of this study was to assess the potential of cadmium telluride nanoparticles loaded onto activated carbon (CdTN-AC) for the removal of sunset yellow (SY) dye from aqueous solution. Adsorption studies were conducted in a batch mode varying solution pH, contact time, initial dye concentration, CdTN-AC dose, and temperature. In order to investigate the efficiency of SY adsorption on CdTN-AC, pseudo-first-order, pseudo-second-order, Elovich, and intra-particle diffusion kinetic models were studied. It was observed that the pseudo-second-order kinetic model fits better than other kinetic models with good correlation coefficient. Equilibrium data were fitted to the Langmuir model. Thermodynamic parameters such as enthalpy, entropy, activation energy, and sticking probability were also calculated. It was found that the sorption of SY onto CdTN-AC was spontaneous and endothermic in nature. The proposed adsorbent is applicable for SY removal from waste of real effluents including pea-shooter, orange drink and jelly banana with efficiency more than 97%.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.saa.2011.12.064 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Highly sensitive fluorescent aptasensor based on magnetic metal-organic framework for aflatoxin B1 detection.
Talanta
January 2025
Engineering Research Center of Grain Storage and Security of Ministry of Education, Henan Provincial Engineering Technology Research Center on Grain Post Harvest, School of Food and Strategic Reserves, Henan University of Technology, Lianhua Road 100, Zhengzhou High-Tech Development Zone, Zhengzhou, 450001, Henan, China. Electronic address:
Aflatoxin B1 (AFB1) has strong carcinogenicity, mutagenicity, and teratogenicity even at low concentrations, presenting a major risk to food safety and human health, hence, it is crucial to develop a sensitive detection technique for AFB1. Consequently, cadmium telluride (CdTe) quantum dots conjugated with AFB1 aptamers serve as fluorescent signal probes, whereas FeO@UiO-66-NH nanocomplexes are employed as magnetic carriers and fluorescence quenchers. FeO@UiO-66-NH reduces background signal interference, thereby enhancing detection sensitivity and Förster Resonance Energy Transfer (FRET) efficiency.
View Article and Find Full Text PDFEvaluation of charge summing correction in CdTe-based photon-counting detectors for breast CT: performance metrics and image quality.
J Med Imaging (Bellingham)
January 2025
U.S. Food and Drug Administration, Office of Science and Engineering Labs, Division of Imaging, Diagnostics, and Software Reliability, Silver Spring, Maryland, United States.
Purpose: We evaluate the impact of charge summing correction on a cadmium telluride (CdTe)-based photon-counting detector in breast computed tomography (CT).
Approach: We employ a custom-built laboratory benchtop system using the X-THOR FX30 0.75-mm CdTe detector (Varex Imaging, Salt Lake City, Utah, United States) with a pixel pitch of 0.
Inhibitory effects of cadmium and hydrophilic cadmium telluride quantum dots on the white rot fungus .
Heliyon
January 2025
Department of Microbiology (Biocenter 1, Viikinkaari 9), Faculty of Agriculture and Forestry, University of Helsinki, Finland.
The white rot fungus was investigated for its ability to decolorize the reactive textile dye Reactive Black 5 (RB5) that was co-exposed to CdCl and quantum dots (QDs) consisting of a CdTe core capped with two different hydrophilic organic ligands (NAC and MPA). Without co-exposure, completely decolorizes RB5 within 9 days. The highest inhibitory effect was found for soluble CdCl with an EC of 583 μg l, followed by MPA-QDs (10,628 μg l) and NAC-QDs (17,575 μg l).
View Article and Find Full Text PDFReconstruction of local three-dimensional temperature field of tumor cells with low-toxic nanoscale quantum-dot thermometer and cepstrum spatial localization algorithm.
Biomed Phys Eng Express
January 2025
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, People's Republic of China.
The optimal method for three-dimensional thermal imaging within cells involves collecting intracellular temperature responses while simultaneously obtaining corresponding 3D positional information. Current temperature measurement techniques based on the photothermal properties of quantum dots face several limitations, including high cytotoxicity and low fluorescence quantum yields. These issues affect the normal metabolic processes of tumor cells.
View Article and Find Full Text PDFA molecularly imprinted ratio fluorescence sensor based on metal-enhanced fluorescence of core-shell structure CaF-silver nanoparticle for visual detection of dicamba.
Anal Bioanal Chem
January 2025
School of Pharmacy, Guangdong Pharmaceutical University, Guangzhou, 510006, China.
Although fluorescence analysis methods are widely used in pesticide residue detection, improving their sensitivity and selectivity remains a challenge. This paper presents a novel ratio fluorescence sensor based on the molecular imprinting polymers (MIPs) and metal-enhanced fluorescence for visual detection of dicamba (DIC). Calcium fluoride (CaF) quantum dots (QDs) were immobilized on the surface of Ag@MIPs, resulting in a blue fluorescence response signal (Ag@MIPs-CaF).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!