A foam nickel support was coated with TiO(2) sols containing anatase particles. The malodorous compound, hydrogen sulfide (H(2)S), was removed via photolytic and photocatalytic oxidation processes under ambient conditions using a self-made photoreactor with 185-nm ozone (O(3)) lamp illumination. The reactor degraded H(2)S with high removal efficiency. The effects of several factors, such as initial H(2)S concentration, ultraviolet light wavelength, relative humidity (RH), oxygen content, and catalyst deactivation and regeneration, on H(2)S degradation were investigated. The highest activity for H(2)S destruction was achieved with 80% RH, 21% oxygen content, approximately 200mg/m(3) initial concentration, and 185-nm O(3) lamp illumination, resulting in higher conversion. Sulfur (S(0)) and sulfate ion (SO(4)(2-)) were detected as byproducts via the XPS technique. The catalytic activity was improved by SO(4)(2-) promotion, but reduced by S(0) accumulation on the photocatalyst surface. In addition, by increasing the amount of SO(4)(2-) generated, the yield of S(0) and catalyst poisoning could be controlled in the reaction.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.jhazmat.2011.11.006 | DOI Listing |
J Colloid Interface Sci
April 2025
School of Chemistry and Chemical Engineering, Central South University, Changsha 410083, Hunan, China. Electronic address:
Heterointerface engineering is an effective strategy to design and construct high-performance photocatalysts. Herein, polyaniline (PANI) nanoparticles and ZnTi layered double hydroxide (ZnTi-LDH) nanosheets were integrated to form organic-inorganic heterostructure (PANI/LDH) via d-π electronic coupling using in-situ polymerization for photocatalytic oxidation/reduction towards tetracycline (TC) and Cr(VI). The photocatalytic activity was closely related to feed amount of aniline (Ani) in the polymerization process, which the abundant PANI nanoparticles were evenly distributed on the surface of ZnTi-LDH nanosheets at the proper Ani feed amount, and thus reinforced d-π electronic coupling at the organic-inorganic interfaces more efficiently.
View Article and Find Full Text PDFBMC Microbiol
November 2024
Chemistry of Natural and Microbial Products Department, Pharmaceutical and Drug Industries Research Institute, National Research Centre, 33 El Buhouth St, Dokki, 12622, Giza, Egypt.
Background: Although there are many uses for metal-organic framework (MOF) based nanocomposites, research shows that these materials have received a lot of interest in the field of water treatment, namely in the photodegradation of water contaminants, and disinfection of some pathogenic bacteria and fungi. This is brought on by excessive water pollution, a lack of available water, low-quality drinking water, and the emergence of persistent micro-pollutants in water bodies. Photocatalytic methods may be used to remove most water contaminants, and pathogenic microbes, and MOF is an excellent modifying and supporting material for photocatalytic degradation.
View Article and Find Full Text PDFSci Rep
August 2024
Department of Civil Engineering, SR University, Warangal, Telangana, 506371, India.
J Am Chem Soc
May 2024
Department of Chemistry and Biochemistry, University of Maryland, College Park, Maryland 20742, United States.
Carbene species play an integral role in high-energy chemistry, transition-metal-carbene chemistry, catalysis, photolytic formation of carbohydrates, and possibly even the formation of interstellar sugars. In 1921, "reactive formaldehyde"─now known as hydroxymethylene (HCOH)─was first implicated as an intermediate in photocatalytic processes. However, due to its transient nature, direct observation of HCOH has predominantly been attained using cryogenic isolation methods.
View Article and Find Full Text PDFChemSusChem
August 2024
Soochow Institute for Energy and Materials Innovations (SIEMIS), Soochow University, 215006, Suzhou, China.
Photocatalytic synthesis of value-added chemicals has gained increasing attention in recent years owing to its versatility in driving many important reactions under ambient conditions. Selective hydrogenation, oxidation, coupling, and halogenation with a high conversion of the reactants have been realized using designed photocatalysts in batch reactors with small volumes at a laboratory scale; however, scaling-up remains a critical challenge due to inefficient utilization of incident light and active sites of the photocatalysts, resulting in poor catalytic performance that hinders its practical applications. Flow systems are considered one of the solutions for practical applications of light-driven reactions and have experienced great success in photolytic and homogeneous photocatalysis, yet their applications in heterogeneous photocatalysis are still under development.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!