Nano fabrication technology of superhard TiN films with sub-nanometered crystallites was developed using an Inductively coupled plasma (ICP) during deposition. Nanocrystalline TiN coatings were fabricated by ICP assisted sputtering and the properies of the coatings were investigated. The ICP assisted TiN coatings showed a much higher nano-hardness (>43 GPa) compared to coatings produced by the conventional DC sputtering process. The ICP assisited TiN coatings also showed superior properties in dense microstructure and surface roughness compared to the DC sputtered TiN coatings. The superior mechanical properties of ICP assistted TiN coatings were attributed to the fine and dense microstructure and high compressive residual stress.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1166/jnn.2011.4794 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Growth of Oxide and Nitride Layers on Titanium Foil and Their Electrochemical Properties.
Materials (Basel)
January 2025
Department of Chemistry, Yeungnam University, 280 Daehak-ro, Gyeongsan 38541, Republic of Korea.
The surface of titanium foil can be modified by heating in the air, in a N flow, and in an NH flow. Upon heating in the air, the elemental Ti gradually transforms to TiO at 550 °C and to rutile TiO at above 700 °C. Treatment in a N flow leads similarly to TiO at 600 °C and TiO at 700 °C, although the overall reaction is slower.
View Article and Find Full Text PDFElectrochemo-Mechanics insights of Sn foil anode in Sodium-Ion batteries.
J Colloid Interface Sci
January 2025
School of Material Science and Engineering, "The Belt and Road Initiative" Advanced Materials International Joint Research Center of Hebei Province, Hebei University of Technology, Tianjin 300130 China. Electronic address:
The development of high-performance sodium-ion batteries (SIBs) is crucial to meeting the growing demand for low-cost, sustainable energy storage alternatives to lithium-ion batteries (LIBs). However, achieving stable cycling performance in SIBs is challenging, particularly with tin (Sn) foil anodes, which suffer from issues like sodium trapping and structural degradation due to significant volume changes during sodiation and desodiation. In this study, we investigate the electrochemo-mechanical behavior of Sn foil anodes, focusing on the mechanisms of sodium trapping and structural evolution that impair battery performance.
View Article and Find Full Text PDFUtilization of TiN and the Texture of Bionic Pangolin Scales to Improve the Wear Resistance of Cast Steel 20Mn Metal.
Biomimetics (Basel)
January 2025
School of Mechanical Engineering, University of Jinan, Jinan 250022, China.
This research centers around cast steel 20Mn, which is the material utilized for the ear-picking roller of a corn harvester. The study delves into methods of enhancing its hydrophobicity and wear resistance. Fiber laser-processing technology was employed to fabricate pangolin bionic micro-textures on the material surface, and PVD technology was utilized to deposit a TiN coating.
View Article and Find Full Text PDFEffects of laser wavelength and pulse energy on the evaporation behavior of TiN coatings in atom probe tomography: A multi-instrument study.
Ultramicroscopy
January 2025
Christian Doppler Laboratory for Sustainable Hard Coatings at the Department of Materials Science, Montanuniversität Leoben, Franz-Josef-Straße 18, 8700 Leoben, Austria.
The impact of the laser wavelength on accuracy in elemental composition analysis in atom probe tomography (APT) was investigated. Three different commercial atom probe systems - LEAP 3000X HR, LEAP 5000 XR, and LEAP 6000 XR - were systematically compared for a TiN model coating studying the effect of shorter laser wavelengths, especially in the deep ultraviolet (DUV) range, on the evaporation behavior. The findings demonstrate that the use of shorter wavelengths enhances the accuracy in elemental composition, while maintaining similar electric field strengths.
View Article and Find Full Text PDFSolar-Active Carbon Nitride Film Integrated by Free Radical Copolymerization for Photocatalytic Indoor Air Purification.
Small
January 2025
Department of Civil and Environment Engineering, University of Ulsan, Daehakro 93, Namgu, Ulsan, 44610, Republic of Korea.
The current lack of stable, scalable, and efficient coating technology dramatically limits the exploitation of solar-driven graphitic carbon nitride (CN) photocatalysts. Herein, a unique, efficient, and scalable method is reported to immobilize CN powder on various substrates ranging from Fluorine tin oxide (FTO), glass, Plexiglas, Al foil, Ti foil, and Granite stone, to even wood. The film shows an outstanding thickness of 212 µm, which is the highest value ever reported.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!