para-Hexanoylcalix[4, 6 or 8]arenes have been used as surface acoustic wave sensor capture layers showing a high efficiency for the detection of linear alcohols, with high reproducibility and rapid response times.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1039/c1cc15352h | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Characterization of Micro-Crack Orientation in a Thin Plate Using Quasi-Static Component Generated by Incident Ultrasonic Lamb Waves.
Sensors (Basel)
January 2025
Key Laboratory of Testing Technology for Manufacturing Process MOE, Southwest University of Science and Technology, Mianyang 621010, China.
The directivity of the quasi-static component (QSC) is quantitatively investigated for evaluating the orientation of a micro-crack buried in a thin solid plate using the numerical simulation method. Based on the bilinear stress-strain constitutive model, a three-dimensional (3D) finite element model (FEM) is built for investigating the nonlinear interaction between primary Lamb waves and the micro-crack. When the primary Lamb waves at A0 mode impinge on the micro-crack, under the modulation of the contact acoustic nonlinearity (CAN), the micro-crack itself will induce QSC.
View Article and Find Full Text PDFNew Torsional Surface Elastic Waves in Cylindrical Metamaterial Waveguides for Sensing Applications.
Sensors (Basel)
December 2024
Institute of Fundamental Technological Research, Polish Academy of Sciences, ul. Pawińskiego 5B, 02-106 Warsaw, Poland.
In this paper, we demonstrate that torsional surface elastic waves can propagate along the curved surface of a metamaterial elastic rod (cylinder) embedded in a conventional elastic medium. The crucial parameter of the metamaterial rod is its elastic compliance s44(1)ω, which varies as a function of frequency ω analogously to the dielectric function εω in Drude's model of metals. As a consequence, the elastic compliance s44(1)ω can take negative values s44(1)ω<0 as a function of frequency ω.
View Article and Find Full Text PDFInfluence of Periodically Varying Slit Widths on Sound Absorption by a Slit Pore Medium.
Materials (Basel)
December 2024
School of Engineering and Innovation, The Open University, Milton Keynes MK7 6AA, UK.
A simple pore microstructure of parallel, identical, and inclined smooth-walled slits in a rigid solid, for which prediction of its geometrical and acoustic properties is straightforward, can yield useful sound absorption. This microstructure should be relatively amenable to 3D printing. Discrepancies between measurements and predictions of normal incidence sound absorption spectra of 3D printed vertical and slanted slit pore samples have been attributed to the rough surfaces of the slit walls and uneven slit cross-sections perpendicular to the printing direction.
View Article and Find Full Text PDFEnhanced Mechanical and Acoustic Properties of Basalt Fiber/Polyurethane Composites by Silane Coupling Agents.
Polymers (Basel)
December 2024
School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China.
Modified basalt microfiber-reinforced polyurethane elastomer composites were prepared by a semi-prepolymer method with two different silane coupling agents (KH550 and KH560) in this study. Infrared spectroscopy was used to quantify the degree of microphase separation and analyze the formation of hydrogen bonding in polyurethane. The interfacial surface and the morphology of fibers and composites from tensile fracture were examined by a scanning electron microscope.
View Article and Find Full Text PDFIntensification of sediment flux by wind-induced residual currents in a heavily contaminated, micro-tidal bay.
Mar Pollut Bull
January 2025
Department of Ocean Sciences, Inha University, Incheon 22212, Republic of Korea. Electronic address:
Wind-induced currents are the major forces responsible for sediment resuspension and transport in micro-tidal bays. To reveal the impact of wind-induced residual currents on the sediment flux, in-situ measurements using acoustic Doppler current profilers (ADCPs) were conducted at two mooring stations in a heavily contaminated, micro-tidal Onsan Bay. During the mooring period, the suspended sediments at both stations were transported seaward (landward) at the surface (bottom) layer mainly through the residual currents (mean-flow flux F: > 70 % of the total flux).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!