In the present paper, the sorption properties of caffeine (CAF) onto polyether type polyurethane foam (PUF) as solid phase sorbent were investigated with UV determination at 274.3 nm. Batch and column methods were used to optimize chemical, flow, kinetic and isothermal conditions for preconcentration of CAF. Results indicated quantitative sorption of CAF at pH 8 and 30 min shaking time. The maximum sorption capacity was found to be 4.1 mg g(-1). Column preconcentration was recommended at a flow rate of 1.5 mL min(-1) and desorption with 4 mL from 0.15 mol L(-1) hydrochloric acid. The procedure provided a linear analytical range of 0.05-30 mg L(-1). The detection and quantification limits are 0.016 and 0.047 mg L(-1), respectively. The procedure was applied to determination of CAF in spiked human plasma. The obtained recoveries were 98-101% and RSD values were from 0.05 to 9.5%.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.2116/analsci.27.1133 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Dynamic characteristics of a compliant seat coupled with the human body and a manikin during the exposure to the whole-body vibration: effect of the polyurethane foam, the track position and the measurement location.
Acta Bioeng Biomech
June 2024
2Institute of Sound and Vibration Research, University of Southampton, United Kingdom.
Transmissibility is used to assess dynamic responses of the occupant-seat system, and most studies have exclusively assessed the transmissibility from the floor to the cushion or the backrest surface with the human body. In this investigation, the vertical vibration transmitted from the floor to six specific locations both on the seat surface and the frame when the seat was fixed on three positions on the track was examined utilizing an SAE J826 manikin and 12 male adults (0.25 to 20 Hz) for a duration of 120 seconds at three vibration amplitudes.
View Article and Find Full Text PDFPolyurethane-grafted graphene oxide from repurposed foam mattress waste.
RSC Adv
January 2025
Department of Chemistry, Carnegie Mellon University 4400 Fifth Avenue Pittsburgh PA 15213 USA
Polyurethanes (PU) make up a large portion of commodity plastics appearing in applications including insulation, footwear, and memory foam mattresses. Unfortunately, as thermoset polymers, polyurethanes lack a clear path for recycling and repurposing, creating a sustainability issue. Herein, using dynamic depolymerization, we demonstrate a simple one-pot synthesis for preparation of an upcycled polyurethane grafted graphene material (PU-GO).
View Article and Find Full Text PDFEnhancing EMI Shielding Efficiency of Polyurethane Foam by Incorporating MWCNT-Decorated Hollow Glass Microspheres.
ACS Omega
January 2025
School of Chemical Engineering, Vellore Institute of Technology, Vellore, Tamil Nadu 632014, India.
This work explores the enhancement of EMI shielding efficiency of polyurethane (PU) foam by loading multiwall carbon nanotube (MWCNTs)-decorated hollow glass microspheres (HGMs). MWCNT was coated onto the HGM surface by a simple solution casting technique. The coated HGM particles were loaded in PU foams, resulting in an even dispersion of MWCNT in the foam struts, thereby forming an interconnected conductive network in the polymer matrix.
View Article and Find Full Text PDFIndustrial scale-up of flue gas bio-mitigation with chemolithotrophs in packed bed reactors: Exploring metabolite synthesis, mass transfer, and techno-economic analysis.
Chemosphere
January 2025
Department of Chemical Engineering, Birla Institute of Technology and Science (BITS), Pilani, 333031, Rajasthan, India. Electronic address:
Elevated emissions of flue gases deteriorate the quality of air, impacting both terrestrial and aquatic ecosystems through their contribution to acid rain and eutrophication. This study examines the bio-mitigation process in a packed bed reactor and its capacity to concurrently decrease the environmental consequences of industrial flue gases (CO, NO, and SO) and wastewater by employing mixed bacterial consortia. The highest biomass productivity achieved during the growth phase was 0.
View Article and Find Full Text PDFSynergistic Effect of Amino-Modified Co-MOF and APP on Improvement of the Fire Safety of the Rigid Polyurethane Foam.
ACS Omega
January 2025
School of Safety Science and Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China.
The combustion of rigid polyurethane foam (RPUF) generates significant amounts of toxic and high-temperature smoke, which restricts its application. Here, an amino-modified Co-MOF (NH-Co-MOF) was synthesized and it was used in conjunction with ammonium polyphosphate (APP) to decrease the flammability of RPUF. We obtained the expected results: the fire safety of RPUF was greatly enhanced by the addition of NH-Co-MOF and APP.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!