Interest in preconcentration techniques for the determination of metals at ultratrace levels still continues increasingly because of some disadvantages of flameless atomic absorption spectrometry as well as the high costs of other sensitive methods in compared to flame atomic absorption spectrometry. In this study, thiol-containing sulfonamide resin was synthesized, characterized and applied as a new sorption material for solid phase extraction of nickel in drinking water samples. After preconcentration procedure, flame atomic absorption spectrometry was used for determinations. Optimum parameters were found to be pH = 3.2, contact time = 20 min and eluate volume = 3 mL. The limit of detection was found to be 0.75 ng x mL(-1). The synthesized resin exhibits the superiority in compared to the other adsorption reagents because of the fact that there is no necessity of any complexing reagent, high sorption capacity as well as the relatively fast extraction rate. The Ni concentrations in the studied 21 kind of water samples were found to be in the range of BDL-4.0 ng x mL(-1).
Download full-text PDF |
Source |
|---|
Publication Analysis
Top Keywords
Similar Publications
Intervalence Charge Transfer in an Osmium(IV) Tetra(ferrocenylaryl) Complex.
Inorg Chem
January 2025
Department of Chemistry, University of Southern California, Los Angeles, California 90089, United States.
The functional properties of tetraaryl compounds, M(aryl) (M = transition metal or group 14 element), are dictated not only by their common tetrahedral geometry but also by their central atom. The identity of this atom may serve to modulate the reactivity, electrochemical, magnetic, and optical behavior of the molecular species, or of extended materials built from appropriate tetraaryl building blocks, but this has not yet been systematically evaluated. Toward this goal, here we probe the influence of Os(IV), C, and Si central atoms on the spectroelectrochemical properties of a series of redox-active tetra(ferrocenylaryl) complexes.
View Article and Find Full Text PDFSteering the Absorption Configuration of Intermediates over Pd-Based Electrocatalysts toward Efficient and Stable CO Reduction.
J Am Chem Soc
January 2025
Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Kowloon 999077, Hong Kong, China.
Palladium (Pd) catalysts are promising for electrochemical reduction of CO to CO but often can be deactivated by poisoning owing to the strong affinity of *CO on Pd sites. Theoretical investigations reveal that different configurations of *CO endow specific adsorption energies, thereby dictating the final performances. Here, a regulatory strategy toward *CO absorption configurations is proposed to alleviate CO poisoning by simultaneously incorporating Cu and Zn atoms into ultrathin Pd nanosheets (NSs).
View Article and Find Full Text PDFSize-Dependency of Electrochemically Grown Copper Nanoclusters Derived from Single Copper Atoms for the CO Reduction Reaction.
ChemSusChem
January 2025
Osaka University: Osaka Daigaku, Research Center for Solar Energy Chemistry, 1-3 Machikaneyama, Toyonaka, 560-8531, Osaka, JAPAN.
Electrochemically grown copper nanoclusters (CuNCs: < 3 nm) from single-atom catalysts have recently attracted intensive attention as electrocatalysts for CO2 and CO reduction reaction (CO2RR/CORR) because they exhibit distinct product selectivity compared with conventional Cu nanoparticles (typically larger than 10 nm). Herein, we conducted a detailed investigation into the size dependence of CuNCs on selectivity for multicarbon (C2+) production in CORR. These nanoclusters were electrochemically grown from single Cu atoms dispersed on covalent triazine frameworks (Cu-CTFs).
View Article and Find Full Text PDFCu-Sb Atomic Pair Site in Metal Halide Perovskite for CO Reduction to Methanol.
Inorg Chem
January 2025
School of Optoelectronic Engineering, Chongqing University of Posts and Telecommunications, Chongqing 400065, China.
Electrochemical conversion of CO into methanol has received extensive attention in recent years since methanol is an efficient energy carrier and industrial feedstock. However, the selectivity to methanol remains unsatisfied. In this work, Sb-doped CsCuI is first and rationally developed for CO electrochemical reduction, achieving remarkable high selectivity of methanol.
View Article and Find Full Text PDFDesired Color Diversity of Carbon Fiber with Excellent Environmental Super-Durability and Remarkable Flame Retardancy.
ACS Appl Mater Interfaces
January 2025
State Key Laboratory of New Textile Materials and Advanced Processing Technologies, College of Textile Science and Engineering, Wuhan Textile University, Wuhan 430200, P. R. China.
Carbon fiber (CF) has been widely used in aerospace, military, infrastructure, sports, and leisure fields owing to its excellent mechanical properties, superior corrosion and friction resistances, excellent thermal stability, and lightweight. However, the ultrablack appearance derived from the extremely strong absorption of light throughout the entire visible region makes it difficult to satisfy the aesthetic and pleasurable demands of the colorful world and limits their applications in a broader field. Herein, inspired by the , a double-layer ultrathin AlO/TiO composite structure was fabricated on CFs by the atomic layer deposition method.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!