Chopper presence and then chopper speed was varied during wet high shear granulation of a placebo formulation using a PMA-1 granulator while also varying the impeller speed. The granules were extensively analyzed for differences due to the chopper. The effect of the chopper on the granules varied with impeller speed from no effect at a low impeller speed of 300 rpm to flow interruptions at an impeller speed of 700 rpm to minimal impact at very high impeller speeds as caking at the bowl perimeter obscured the effect of the chopper on the flow pattern. Differences in the granule flowability were minimal. However, it was concluded that the largest fraction of optimal granules would be obtained at an impeller speed of 700 rpm with the chopper at 1,000 rpm allowing balances between flow establishment, segregation, and centrifugal forces.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3225551 | PMC |
| http://dx.doi.org/10.1208/s12249-011-9703-1 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Determination of Vibration Properties and Reliable Frequency Estimation for Synchronous Vibrations Through Improved Blade Tip Timing Techniques Without a Once-per-Revolution Sensor.
Sensors (Basel)
January 2025
Institute of Power Plant Technology, Steam and Gas Turbines, RWTH Aachen University, 52062 Aachen, Germany.
Synchronous vibrations, which are caused by periodic excitations, can have a severe impact on the service life of impellers. Blade Tip Timing (BTT) is a promising technique for monitoring synchronous vibrations due to its non-intrusive nature and ability to monitor all blades at once. BTT generally employs a Once-per-Revolution (OPR) sensor that is mounted on the shaft for blade identification and deflection calculation.
View Article and Find Full Text PDFAdvancement of the Dragon Heart 7-Series for Pediatric Patients With Heart Failure.
Artif Organs
January 2025
BioCirc Research Laboratory, School of Biomedical Engineering, Science, and Health Systems, Drexel University, Philadelphia, Pennsylvania, USA.
Background: Safe and effective pediatric blood pumps continue to lag far behind those developed for adults. To address this growing unmet clinical need, we are developing a hybrid, continuous-flow, magnetically levitated, pediatric total artificial heart (TAH). Our hybrid TAH design, the Dragon Heart (DH), integrates both an axial flow and centrifugal flow blood pump within a single, compact housing.
View Article and Find Full Text PDFInfluence and Mechanism of Solid-Phase Particle Factors on Oil-Solid Separation of Oily Sludge Treated by Flotation Method.
Toxics
December 2024
School of Resource and Environmental Engineering, Shandong University of Technology, Zibo 255000, China.
The solid phase composition in oily sludge (OS) is a key factor affecting the oil-solid separation of OS. In this paper, the effects and mechanisms of solid-phase particle factors on the oil content of residue phase were investigated in order to improve the oil-solid separation efficiency. Flotation experiments were carried out on single-size sand and mixed-size sand OS consisting of three particle sizes at room temperature without adding flotation reagents.
View Article and Find Full Text PDFCFD-Based Determination of Optimal Design and Operating Conditions of a Fermentation Reactor Using Bayesian Optimization.
Biotechnol Bioeng
December 2024
Mork Family Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, California, USA.
The efficiency of fermentation reactors is significantly impacted by gas dispersion and concentration distribution, which are influenced by the reactor's design and operating conditions. As the process scales up, optimizing these parameters becomes crucial due to the pronounced concentration gradients that can arise. This study integrates the kinetics of the fermentation process with hydrodynamic analysis using Bayesian optimization to efficiently determine the optimal reactor design and operating conditions.
View Article and Find Full Text PDFAnalysis of fluid forces impacting on the impeller of a mixed flow blood pump with computational fluid dynamics.
Int J Artif Organs
December 2024
Department of Mechanical Engineering, Konya Technical University, Konya, Turkey.
This study presents four different impeller designs to compare hydrodynamic forces. Numerical simulation studies are performed via computational fluid dynamics to specify and investigate the hydraulic forces impacting the impeller of the mixed-flow blood pump with a volute. The design point of this pump is that the flow rate is 5 L/min, the rotational speed is 8000 rpm, and the manometric head is 100 mmHg.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!