A novel photoanode architecture of dye-sensitized solar cells based on TiO2 hollow sphere/nanorod array double-layer film.

J Colloid Interface Sci

Ministry-of-Education Key Laboratory for the Green Preparation and Application of Functional Materials, Faculty of Materials Science and Engineering, Hubei University, Wuhan 430062, PR China.

Published: January 2012

A novel TiO(2) double-layer (DL) film consisting of TiO(2) hollow spheres (HSs) as overlayer and single-crystalline TiO(2) nanorod arrays (RAs) as underlayer was designed as the photoanode of dye-sensitized solar cells (DSSCs). This new-typed TiO(2) HS/RA DL film could significantly improve the efficiency of DSSCs owing to its synergic effects, i.e. the relatively large specific surface area of TiO(2) HSs for effective dye adsorption, enhanced light harvesting capability originated from TiO(2) RA film, and rapid interfacial electron transport in one-dimensional TiO(2) nanorod arrays. The overall energy-conversion efficiency of 4.57% was achieved by the formation of TiO(2) DL film, which is 16% higher than that formed by TiO(2) HS film and far larger than that formed by TiO(2) RA film (η=0.99%). The light absorption and interfacial electron transport, which play important roles in the efficiency of DSSCs, were investigated by UV-vis absorption spectra and electrochemical impedance spectra.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jcis.2011.08.073DOI Listing

Publication Analysis

Top Keywords

tio2 film
16
tio2
11
dye-sensitized solar
8
solar cells
8
tio2 hollow
8
double-layer film
8
tio2 nanorod
8
nanorod arrays
8
efficiency dsscs
8
interfacial electron
8

Similar Publications

WO/Ag/TiO composite photoelectrodes were formed via the high-temperature calcination of a WO film, followed by the sputtering of a very thin silver film and deposition of an overlayer of commercial TiO nanoparticles. These synthetic photoanodes were characterized in view of the oxidation of a model organic compound glucose combined with the generation of hydrogen at a platinum cathode. During prolonged photoelectrolysis under simulated solar light, these photoanodes demonstrated high and stable photocurrents of ca.

View Article and Find Full Text PDF

The use of metal oxide catalysts to enhance plasma CO reduction has seen significant recent development towards processes to reduce greenhouse gas emissions and produce renewable chemical feedstocks. While plasma reactors are effective at producing the intended chemical transformations, the conditions can result in catalyst degradation. Atomic layer deposition (ALD) can be used to synthesize complex, hierarchically structured metal oxide plasma catalysts that, while active for plasma CO reduction, are potentially vulnerable to degradation due to their high surface area and nanoscopic thickness.

View Article and Find Full Text PDF

Hydrogen sulfide (HS), carbonyl sulfide (COS), and dimethyl sulfide (DMS) are the primary sulfur compounds found in seawater, which cause pitting corrosion on the oxide passivation film of titanium, known as "the marine metals". In this study, density functional theory (DFT) was used to analyze the adsorption and surface electronic properties of these three small molecules on the anatase TiO(101) surface. The analysis was conducted through adsorption energy, work function, Mulliken charge population, and density of states (DOS).

View Article and Find Full Text PDF

Construction of CdInS/MXene-TiO Z-Scheme Heterojunction for High-Gain Organic Photoelectrochemical Transistor to Achieve Maximized Transconductance at Zero Bias.

Small

December 2024

College of Chemistry and Material Science, Key Laboratory of Agricultural Film Application of Ministry of Agriculture and Rural Affairs, Shandong Agricultural University, Tai'an, Shandong, 271018, P. R. China.

Interfacial charge-carrier complexation is a bottleneck problem governing the gating effect of organic photoelectrochemical transistor (OPECT) biosensors. Therefore, it has long been desired to enhance the OPECT gating effect and realize the maximum transconductance at zero bias. In this study, an in situ engineered heterojunction gating and nano-enzymatic catalytic integration of OPECT-colorimetric dual-mode sensing platform is developed for dibutyl phthalate detection.

View Article and Find Full Text PDF

Detection of Hydrogen Peroxide Vapors Using Acidified Titanium(IV)-Based Test Strips.

Materials (Basel)

December 2024

Department of Chemistry, 316 Physical Science, Oklahoma State University, Stillwater, OK 74078, USA.

One method for the colorimetric detection of hydrogen peroxide vapor is based on a titanium-hydrogen peroxide complex. A color changing material based on a titania hydroxypropyl cellulose thin film was initially developed. However, as this material dries, the sensitivity of the material is significantly reduced.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!