Enhanced degradation of p-nitrophenol in soil in a pulsed discharge plasma-catalytic system.

J Hazard Mater

Institute of Electrostatics and Special Power, Dalian University of Technology, Dalian 116024, PR China.

Published: November 2011

A pulsed discharge plasma-TiO(2) catalytic (PDPTC) system was developed to investigate the degradation of p-nitrophenol (PNP) in soil. The effects of TiO(2) amount, soil pH and air moisture on PNP degradation were evaluated, and PNP degradation processes were predicted with Gaussian 03W combined with density functional theory (DFT). Experimental results showed that 88.8% of PNP could be smoothly removed in 10 min in the PDPTC system with the specific energy density of 694 J g(soil)(-1), compared with 78.1% in plasma alone system. The optimum TiO(2) amount was 2% in the present study, and higher TiO(2) amount exhibited an inhibitive effect. Alkaline soil was favorable for PNP removal. The increase of air moisture to a certain extent could enhance PNP removal. A DFT calculation presented that there was a high preference for the -ortho and -para positions with respect to the functional -OH group of PNP molecule for OH radicals attack. The main intermediates were hydroquinone, benzoquinone, catechol, phenol, benzo[d][1,2,3]trioxole, acetic acid, formic acid, NO(2)(-), NO(3)(-) and oxalic acid. The generation of hydroxylated intermediates, NO(2)(-) and NO(3)(-) suggested that the experimental results were consistent with those of the theoretical prediction.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jhazmat.2011.08.041DOI Listing

Publication Analysis

Top Keywords

tio2 amount
12
degradation p-nitrophenol
8
pulsed discharge
8
pdptc system
8
air moisture
8
pnp degradation
8
pnp removal
8
no2- no3-
8
pnp
7
enhanced degradation
4

Similar Publications

TiO has broad prospects in reducing the safety risks posed by emerging pollutants in water environments. However, the high recombination rate of photogenerated carriers limits the activity and photon utilization efficiency of TiO. In this study, mesoporous TiO (m-TiO) and ultra-thin g-CN nanosheets were composited using a hydrothermal method, with the m-TiO tightly and uniformly wrapped by g-CN.

View Article and Find Full Text PDF

Optimization of pyrite cinder strengthening continuous acid decomposition of ilmenite by response surface methodology.

Sci Rep

December 2024

State Key Testing Laboratory of Vanadium & Titanium, Vanadium and Titanium Resource Comprehensive Utilization Key Laboratory of Sichuan Province, Panzhihua University, Panzhihua, 617000, Sichuan, People's Republic of China.

Pyrite cinder could release more heat to improve he acid decomposition reaction of ilmenite, lower concentrations of sulfuric acid, increase the amount of TiO waste acid reused, reduce titanium gypsum emissions, and promote the green and sustainable development of TiO. Using pyrite cinder as strengthening activator, the continuous acid decomposition conditions for ilmenite were optimized by using response surface methodology based on Box-Behnken design method. The acid decomposition conditions such as acid ilmenite ratio, acid concentration and pyrite cinder dosage mainly affected the reaction temperature, reaction equilibrium, reaction velocity, volatilization degree of water and sulfuric acid, ultimately affecting the solidification degree of the products and reaction yields.

View Article and Find Full Text PDF

The use of metal oxide catalysts to enhance plasma CO reduction has seen significant recent development towards processes to reduce greenhouse gas emissions and produce renewable chemical feedstocks. While plasma reactors are effective at producing the intended chemical transformations, the conditions can result in catalyst degradation. Atomic layer deposition (ALD) can be used to synthesize complex, hierarchically structured metal oxide plasma catalysts that, while active for plasma CO reduction, are potentially vulnerable to degradation due to their high surface area and nanoscopic thickness.

View Article and Find Full Text PDF

From Fossil to Bio-Based AESO-TiO Microcomposite for Engineering Applications.

Polymers (Basel)

November 2024

Department of Electroactive Polymers and Plasmochemistry, "Petru Poni" Institute of Macromolecular Chemistry, 41A Gr. Ghica-Voda Alley, 700487 Iasi, Romania.

Environmental issues and the reduction of fossil fuel resources will lead to the partial or total substitution of petroleum-based materials with natural, raw, renewable ones. One expanding domain is the obtaining of engineering materials from vegetable oils for sustainable, eco-friendly polymers for different applications. Herein, the authors propose a simplified and green synthesis pathway for a thermally curable, acrylated and epoxidized soybean oil matrix formulation containing only epoxidized soybean oil, acrylic acid, a reactive diluent (5%) and just 0.

View Article and Find Full Text PDF

We have shown that the adsorption of Cu ions on various metal oxides, depending on the pH of the solution, can be described assuming the formation of only two surface complexes with surface hydroxyl groups SOH: SOCu(OH) and SOCu. Using an ion-selective electrode for Cu, we determined the adsorption edges, i.e.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!