Arsenic removal from groundwater of the Chaco-Pampean plain (Argentina) using natural geological materials as adsorbents.

J Environ Sci Health A Tox Hazard Subst Environ Eng

KTH-International Groundwater Arsenic Research Group, Department of Land and Water Resources Engineering, Royal Institute of Technology, Teknikringen 76, Stockholm, Sweden.

Published: December 2011

Use of natural geological materials for arsenic (As) removal is an emerging solution at a household level for poor people in remote rural settlements, especially when the materials are locally available and can be collected by the local population. Their low or zero cost makes these materials very attractive compared with synthetic or commercial materials. Sometimes, this may be the only option to provide safe water to very poor settlements. Their suitability for As removal from water is mainly due to adsorption, co-precipitation and ion exchange processes involving Fe- and Al-rich minerals and clay minerals present in the soils or sediments. In the present study, various clay-rich soils from the Santiago del Estero province (SDE, NW Argentina) and, for comparison, a laterite from the Misiones province have been tested as adsorbents for As in shallow naturally contaminated groundwaters of the Río Dulce alluvial aquifer in SDE. Batch adsorption experiments showed higher As(V) removal for the Misiones laterite sample (99 %) as compared with the soils from SDE (40-53 %), which can be related to lower contents of water-soluble and oxalate extractable Al and Fe in the last samples. These results suggest the application of the Misiones laterite soil as an alternative for As removal. However, high transportation costs from Misiones to SDE can be an economical restriction for the low-income population of SDE.

Download full-text PDF

Source
http://dx.doi.org/10.1080/10934529.2011.598838DOI Listing

Publication Analysis

Top Keywords

arsenic removal
8
natural geological
8
geological materials
8
misiones laterite
8
materials
5
sde
5
removal groundwater
4
groundwater chaco-pampean
4
chaco-pampean plain
4
plain argentina
4

Similar Publications

Surface Complexation and Packed Bed Mass Transport Models Enable Adsorbent Design for Arsenate and Vanadate Removal.

ACS ES T Eng

October 2024

School of Sustainable Engineering & the Built Environment, Arizona State University, Tempe, Arizona 85287, United States of America.

Co-occurrence of metal oxo-anions (e.g., arsenate) in drinking water pose human health risks.

View Article and Find Full Text PDF

Lignocellulose biosorbents: Unlocking the potential for sustainable environmental cleanup.

Int J Biol Macromol

January 2025

Amity Institute of Pharmacy, Amity University Haryana, Amity Education Valley, Panchgaon, Manesar, Gurugram, Haryana 122413, India. Electronic address:

Climate change, the overconsumption of fossil fuels, and rapid population and economic growth have collectively driven a growing emphasis on environmental sustainability and the need for effective resource management. Chemicals or materials not currently regulated are known as contaminants of emergent concern (CECs). Nevertheless, wastewater is thought to be its main source, and worries about its probable presence in the environment are growing due to its potential damage to human and environmental health.

View Article and Find Full Text PDF

Arsenic (As) enrichment in groundwater stems from natural and hydrogeochemical factors, leading to geological contamination. Groundwater and surface water are interconnected, allowing As migration and surface water contamination. The As contamination poses health risks through contaminated water consumption.

View Article and Find Full Text PDF

Cadmium (Cd) and arsenic (As) often coexist in water and agricultural soils around mining areas, and it is difficult to remove them at the same time due to their opposite chemical behaviors. Therefore, this study employed a co-precipitation-pyrolysis method to synthesize silica-based magnetic biochar (SMB) materials for the remediation of water contaminated with both Cd and As. The optimization of preparation conditions involved introducing three different types of silicates (NaSiO, CaSiO,and SiO) into the biomass-magnetite mixture, followed by pyrolysis at various temperatures (300℃, 500℃, and 700℃), and the optimal preparation conditions were determined based on the composite batch experiments.

View Article and Find Full Text PDF

Phenylarsonic acid (PAA) compounds, widely used in animal husbandry, pose a considerable environmental threat owing to their potential transformation into toxic inorganic arsenic species. To efficiently decontaminate PAA and adsorb secondary As(V), a hybrid CuFeO-modified carbon nanotube (CuFeO-CNT) filter was developed in this study. The hybrid CuFeO-CNT filter functioned as an effective catalyst, convective filtration medium, electrode, and adsorbent.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!