The influence of solvent annealing on microscopic deformational behavior of a styrene/n-butyl acrylate copolymer latex film subjected to uniaxial tensile deformation was studied by small-angle X-ray scattering. It was demonstrated that the microscopic deformation mechanism of the latex films transformed from a nonaffine deformation behavior to an affine deformation behavior after solvent annealing. This was attributed to the interdiffusion of polymeric chains between adjacent swollen latex particles in the film. It turns out that solvent annealing is much more efficient than thermal annealing due to a much slow evaporation process after solvent annealing.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/la2026939 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Utilizing Solvent Repulsion between Dimethylformamide and Isopropanol to Manipulate Sn Distribution for Bifacial CuZnSn(S,Se) Solar Cells.
ACS Appl Energy Mater
December 2024
School of Chemistry, University of Bristol, Cantocks Close, BS8 1TS Bristol, U.K.
Rationalizing the role of chemical interactions in the precursor solutions on the structure, morphology, and performance of thin-film CuZnSn(S,Se) (CZTSSe) is key for the development of bifacial and other photovoltaic (PV) device architectures designed by scalable solution-based methods. In this study, we uncover the impact of dimethylformamide (DMF) and isopropanol (IPA) solvent mixtures on cation complexation and rheology of the precursor solution, as well as the corresponding morphology, composition, and PV performance of CZTSSe thin-film grown on fluorine-doped tin oxide (FTO). We find that increasing the proportion of IPA leads to a nonlinear increase in dynamic viscosity due to the strong repulsion between DMF and IPA, which is characterized by an interaction cohesion parameter of 3.
View Article and Find Full Text PDFUnusual Endotaxy Growth of Hexagonal Nanosheets by the Self-Assembly of a Homopolymer.
Angew Chem Int Ed Engl
December 2024
Tongji University, School of Material Science and Engineering, CHINA.
A classical crystallization usually grows epitaxially from a crystal nucleus. Presented in this study is an unusual endotaxy growth manner of a crystalline homopolymer to form hexagonal nanosheets. The amphiphilic homopolymer, poly(3-(4-(phenyldiazenyl)phenoxy)propyl methacrylate) (PAzoPMA), is first annealed in isopropanol to afford a hexagonal nut-like structure.
View Article and Find Full Text PDFOptimization of Polyelectrolyte Coacervate Membranes via Aqueous Phase Separation.
ACS Appl Mater Interfaces
December 2024
Department of Chemical Engineering, University of Massachusetts Amherst, Amherst, Massachusetts 01003-9303, United States.
Polymeric membranes fabricated via the nonsolvent-induced phase separation process rely heavily on toxic aprotic organic solvents, like -methyl-pyrrolidine (NMP) and dimethylformamide. We suggest that the "saloplastic" nature of polyelectrolyte complexes (PECs) makes them an excellent candidate for fabricating next-generation water purification membranes that use a more sustainable aqueous phase separation process. In this study, we investigate how the properties of PECs and their interactions with salt can form pore-containing membranes from the strong polyelectrolytes poly(sodium 4-styrenesulfonate) (PSS) and poly(diallyldimethylammonium chloride) (PDADMAC) in the presence of potassium bromide (KBr).
View Article and Find Full Text PDFLow-cost high performance piezoelectric fabrics based on Nylon-6 nanofibers.
Front Chem
December 2024
Department of Chemical and Biomolecular Engineering, University of Notre Dame, Notre Dame, IN, United States.
To fully harness the potential of smart textiles, it is cruical to develop energy harvesters which can function both as fabric and energy generator. In this work, we present a high performance low-cost piezoelectric nano-fabric using even-number Nylon ( Nylon-6). Nylon-6 was chosen for optimal mechanical properties such as mechanical strength and stiffness.
View Article and Find Full Text PDFTriggering Oxygen Redox Cycles in Nickel Ferrite by Octahedral Geometry Engineering for Enhancing Oxygen Evolution.
Adv Sci (Weinh)
December 2024
Guangzhou Key Laboratory of Low-Dimensional Materials and Energy Storage Devices, Collaborative Innovation Center of Advanced Energy Materials, School of Materials and Energy, Guangdong University of Technology, Guangzhou, 510006, China.
Spinel-type nickel ferrite (NiFeO, x≤1) is a widely used electrocatalyst for the oxygen evolution reaction (OER). Due to the lower hybridization of metal-d and oxygen-p orbitals, the OER process on NiFeO follows the sluggish adsorbate evolution mechanism (AEM). Generally, activating the lattice oxygen to trigger the lattice-oxygen-mediated mechanism (LOM) can enhance the OER activity.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!