A Thomson parabola ion spectrometer has been designed for use at the Multiterawatt (MTW) laser facility at the Laboratory for Laser Energetics (LLE) at the University of Rochester. This device uses parallel electric and magnetic fields to deflect particles of a given mass-to-charge ratio onto parabolic curves on the detector plane. Once calibrated, the position of the ions on the detector plane can be used to determine the particle energy. The position dispersion of both the electric and magnetic fields of the Thomson parabola was measured using monoenergetic proton and alpha particle beams from the SUNY Geneseo 1.7 MV tandem Pelletron accelerator. The sensitivity of Fujifilm BAS-TR imaging plates, used as a detector in the Thomson parabola, was also measured as a function of the incident particle energy over the range from 0.6 MeV to 3.4 MeV for protons and deuterons and from 0.9 MeV to 5.4 MeV for alpha particles. The device was used to measure the energy spectrum of laser-produced protons at MTW.

Download full-text PDF

Source
http://dx.doi.org/10.1063/1.3606446DOI Listing

Publication Analysis

Top Keywords

thomson parabola
16
parabola ion
8
ion spectrometer
8
protons deuterons
8
alpha particles
8
electric magnetic
8
magnetic fields
8
detector plane
8
particle energy
8
parabola measured
8

Similar Publications

Ion implantation of laser induced graphite plasma has been performed for modifications in surface, optical, electrical and structural properties of CR-39. KrF Excimer laser (248 nm, 18 ns, 120 mJ), at an irradiance of 2.5 × 10 W cm is utilized for the production of graphite plasma.

View Article and Find Full Text PDF

Laser-plasma accelerators (LPAs) can deliver pico- to nanosecond long proton bunches with ≳100 nC of charge dispersed over a broad energy spectrum. Increasing the repetition rates of today's LPAs is a necessity for their practical application. This, however, creates a need for real-time proton bunch diagnostics.

View Article and Find Full Text PDF

The Thomson parabola ion spectrometer is vulnerable to intense electromagnetic pulses (EMPs) generated by a high-power laser interacting with solid targets. A metal shielding cage with a circular aperture of 1 mm diameter is designed to mitigate EMPs induced by a picosecond laser irradiating a copper target in an experiment where additionally an 8-ns delayed nanosecond laser is incident into an aluminum target at the XG-III laser facility. The implementation of the shielding cage reduces the maximum EMP amplitude inside the cage to 5.

View Article and Find Full Text PDF

Absolute calibration up to 20 MeV of an online readout CMOS system suitable to detect high-power lasers accelerated protons.

Rev Sci Instrum

August 2023

LULI - CNRS, CEA, Sorbonne Université, Ecole Polytechnique, Institut Polytechnique de Paris, F-91128 Palaiseau Cedex, France.

We present the design and absolute calibration of a charged particle online readout CMOS system tailored for high-power laser experiments. This system equips a Thomson parabola spectrometer, which is used at the Apollon petawatt scale laser facility to measure the spectra of protons produced by high-intensity laser-target interactions. The RadEye1 CMOS matrices array detectors are paired with a custom triggering system for image grabbing.

View Article and Find Full Text PDF

The development of high intensity petawatt lasers has created new possibilities for ion acceleration and nuclear fusion using solid targets. In such laser-matter interaction, multiple ion species are accelerated with broad spectra up to hundreds of MeV. To measure ion yields and for species identification, CR-39 solid-state nuclear track detectors are frequently used.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!