In near-field acoustic holography sound field separation techniques make it possible to distinguish between sound coming from the two sides of the array. This is useful in cases where the sources are not confined to only one side of the array, e.g., in the presence of additional sources or reflections from the other side. This paper examines a separation technique based on measurement of the particle velocity in two closely spaced parallel planes. The purpose of the technique is to recover the particle velocity radiated by a source in the presence of disturbing sound from the opposite side of the array. The technique has been examined and compared with direct velocity based reconstruction, as well as with a technique based on the measurement of the sound pressure and particle velocity. The double layer velocity method circumvents some of the drawbacks of the pressure-velocity based reconstruction, and it can successfully recover the normal velocity radiated by the source, even in the presence of strong disturbing sound.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1121/1.3598431 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A first principles study of convection cells to shear flow instability in 2D Yukawa liquids driven by Reynolds stress.
Sci Rep
January 2025
Institute for Plasma Research, HBNI, Bhat, Gandhinagar, 382428, India.
The stability of kinetic-level convection cells (wherein the magnitude of macroscopic and microscopic velocities are of same order) is studied in a two-dimensional Yukawa liquid under the effect of microscopic velocity perturbations. Our numerical experiments demonstrate that for a given system aspect ratio β viz., the ratio of system length [Formula: see text] to its height [Formula: see text] and number of convective rolls initiated [Formula: see text], the fate of the convective cells is decided by [Formula: see text].
View Article and Find Full Text PDFInfluence of Spray Angle on Scratch Resistance of Cold-Sprayed SS316L Deposits.
Materials (Basel)
January 2025
Research and Testing Institute Pilsen, 30100 Plzen, Czech Republic.
In this study, we investigated the effect of spray angle on the microstructure, bonding quality, and scratch resistance of cold-sprayed SS316L coatings on SS304 substrates. The coatings were deposited at spray angles of 45°, 60°, 75°, and 90° using a high-pressure cold spray system. A comprehensive analysis of the relationship between the spray angle and coating properties was conducted, with a particular focus on fracture toughness and porosity.
View Article and Find Full Text PDFComputational Fluid Dynamics as a Digital Tool for Enhancing Safety Uptake in Advanced Manufacturing Environments Within a Safe-by-Design Strategy.
Materials (Basel)
January 2025
Innovation in Research & Engineering Solutions (IRES), 1000 Brussels, Belgium.
In modern manufacturing environments, pollution management is critical as exposure to harmful substances can cause serious health issues. This study presents a two-stage computational fluid dynamic (CFD) model to estimate the distribution of pollutants in indoor production spaces. In the first stage, the Reynolds-averaged Navier-Stokes (RANS) method was used to simulate airflow and temperature.
View Article and Find Full Text PDFInterface Acoustic Waves in 128° YX-LiNbO/SU-8/Overcoat Structures.
Micromachines (Basel)
January 2025
Department of Astronautical, Electrical and Energy Engineering, University of Rome "La Sapienza", Via Eudossiana 18, 00184 Rome, Italy.
The propagation of interface acoustic waves (IAWs) in 128° YX-LiNbO/SU-8/overcoat structures was theoretically studied and experimentally investigated for different types of overcoat materials and thicknesses of the SU-8 adhesive layer. Three-dimensional finite element method analysis was performed using Comsol Multiphysics software to design an optimized multilayer configuration able to achieve an efficient guiding effect of the IAW at the LiNbO/overcoat interface. Numerical analysis results showed the following: (i) an overcoat faster than the piezoelectric half-space ensures that the wave propagation is confined mainly close to the surface of the LiNbO, although with minimal scattering in the overcoat; (ii) the presence of the SU-8, in addition to performing the essential function of an adhesive layer, can also promote the trapping of the acoustic energy toward the surface of the piezoelectric substrate; and (iii) the electromechanical coupling efficiency of the IAW is very close to that of the surface acoustic wave (SAW) along the bare LiNbO half-space.
View Article and Find Full Text PDFPicosecond Laser Etching of Glass Spiral Microfluidic Channel for Microparticles Dispersion and Sorting.
Micromachines (Basel)
January 2025
School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China.
In microfluidic chips, glass free-form microchannels have obvious advantages in thermochemical stability and biocompatibility compared to polymer-based channels, but they face challenges in processing morphology and quality. Hence, picosecond laser etching with galvanometer scanning is proposed to machine spiral microfluidic channels on a glass substrate. The objective is to disperse and sort microparticles from a glass microchip that is difficult to cut.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!