Laser ultrasonics detection of an embedded crack in a composite spherical particle.

Ultrasonics

Laboratoire de Physique de l'Etat Condensé, UMR CNRS 6087, Université du Maine, Avenue Olivier Messiaen, 72085 LE MANS Cedex 9, France.

Published: January 2012

Laser ultrasonics was applied to the manufacturing control of the integrity (no failure) of coated spherical particles designed for High Temperature Reactors (HTR). This control is of major importance, since the coating of the nuclear fuel kernel is designed to prevent from the diffusion of fission products outside the particle during reactor operation. The SiC layer composing the coating is particularly important, since this layer must be an impenetrable barrier for fission products. The integrity of the SiC shell (no crack within the shell) can be assessed by the ultrasonic vibration spectrum of the HTR particle, which is significantly changed, compared to the reference spectrum of a defect-free particle. Spheroidal vibration modes of defect-free dummy particles with a zirconium dioxide (ZrO(2)) core were observed in the 2-5MHz range. A theoretical analysis is presented to account for the observed vibration spectra of defect-free or cracked HTR particles.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.ultras.2011.06.008DOI Listing

Publication Analysis

Top Keywords

laser ultrasonics
8
fission products
8
ultrasonics detection
4
detection embedded
4
embedded crack
4
crack composite
4
composite spherical
4
particle
4
spherical particle
4
particle laser
4

Similar Publications

The thickness loss caused by corrosion is a vital factor that threatens the health of shell structures. It is significant to perform a non-destructive quantitative evaluation of corrosion-thinning defects in plate structures. Based on the laser ultrasonic guided wavefield scanning technology, this paper proposes an instantaneous wavenumber multi-shot fusion method, which improves the performance of the instantaneous wavenumber imaging method.

View Article and Find Full Text PDF

Reusing healing abutments is common practice among clinicians; however, ensuring complete surface decontamination is crucial to avoid further complications. This study aimed to evaluate the cleaning potential of Er: YAG laser at different frequencies, as an adjunctive step prior to autoclave sterilization. Forty contaminated healing abutments were divided into four groups.

View Article and Find Full Text PDF

Unlike many conventional manufacturing techniques, 3D Printing/Additive Manufacturing (3DP/AM) fabrication creates builds with unprecedented degrees of structural and geometrical complexities. However, uncertainties in 3DP/AM processes and material attributes could cause geometric and structural quality issues in resulting builds and products. Evaluating the sensitivity of process parameters and material properties for process optimization, quality assessment, and closed-loop control is crucial in practice.

View Article and Find Full Text PDF

Laser-Induced Graphene Electrodes for Flexible pH Sensors.

Nanomaterials (Basel)

December 2024

Department of Applied Science and Technology, Politecnico di Torino, Corso Duca Degli Abruzzi 24, 10129 Turin, Italy.

In the growing field of personalized medicine, non-invasive wearable devices and sensors are valuable diagnostic tools for the real-time monitoring of physiological and biokinetic signals. Among all the possible multiple (bio)-entities, pH is important in defining health-related biological information, since its variations or alterations can be considered the cause or the effect of disease and disfunction within a biological system. In this work, an innovative (bio)-electrochemical flexible pH sensor was proposed by realizing three electrodes (working, reference, and counter) directly on a polyimide (Kapton) sheet through the implementation of CO laser writing, which locally converts the polymeric sheet into a laser-induced graphene material (LIG electrodes), preserving inherent mechanical flexibility of Kapton.

View Article and Find Full Text PDF

The most common transducers used to generate ultrasound in medical applications are based on short electrical pulses applied to piezoelectric transducers and capacitive micromachined ultrasound transducers. However, piezoelectric transducers have a limited frequency bandwidth, defined by their physical thickness, and capacitive micromachined ultrasound transducers have poor transmission efficiency. The high frequency cutoff limits the spatial resolution of ultrasonic images.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!