Lead, cadmium and aluminum in Canadian infant formulae, oral electrolytes and glucose solutions.

Food Addit Contam Part A Chem Anal Control Expo Risk Assess

Food Research Division, Bureau of Chemical Safety, Food Directorate, Ottawa, Ontario, Canada.

Published: June 2011

Lead (Pb), cadmium (Cd) and aluminum (Al) were determined in 437 individual samples of infant formulae, oral electrolytes and 5% glucose solutions available in Canada. In the electrolytes, Cd and Pb concentrations were all below 0.01 and 0.041 ng g(-1), respectively. In the 5% glucose solutions, Pb and Cd levels averaged 0.01 and 0.09 ng g(-1), respectively. Reported on an as-consumed basis, Pb levels in milk- and soya-based formulae averaged 0.90 and 1.45 ng g(-1), respectively, while Cd levels averaged 0.23 and 1.18 ng g(-1), respectively Average Al levels on an as-consumed basis were 440 ng g(-1) (range 10-3400 ng g(-1)) in milk-based formulae and 730 ng g(-1) (range 230-1100 ng g(-1)) in soy-based formulae. Al concentrations increased in the following order: plain formula < low-iron formula < iron-supplemented formula < casein hydrolysate formula ≈ premature formula ≤ soy formula. For example, in the powdered formulae, average Al concentrations were 18 ng g(-1) for plain milk-based, 37 ng g(-1) for low-iron, 128 ng g(-1) for iron supplemented, 462 ng g(-1) for lactose-free, 518 ng g(-1) for hypoallergenic and 619 ng g(-1) for soy-based formula. Al concentrations, as-consumed, increased with decreasing levels of concentration: powder < concentrated liquid < ready-to-use. Formulae stored in glass bottles contained between 100 and 300 ng g(-1) more Al than the same formulae stored in cans. The source of the increased Al did not appear to be the glass itself, because most electrolytes and glucose solutions, also stored in glass, contained less than 8 ng g(-1) Al. Corresponding differences in Pb and Cd levels were not observed. Al concentrations varied substantially among manufacturers; however, all manufacturers were able to produce plain milk-based formulae containing less than 50 ng g(-1) Al, i.e. within the range of Al concentrations found in human milk. Next to soya-based and hypoallergenic formulae, premature formulae contained among the highest concentrations of Al, ranging 851-909 ng g(-1) from one manufacturer and 365-461 ng g(-1) from another.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3118527PMC
http://dx.doi.org/10.1080/19393210.2011.571795DOI Listing

Publication Analysis

Top Keywords

g-1
19
glucose solutions
16
electrolytes glucose
12
g-1 range
12
formulae
11
lead cadmium
8
cadmium aluminum
8
infant formulae
8
formulae oral
8
oral electrolytes
8

Similar Publications

Evaporation-Induced Reticular Growth of UiO-66_NH in Chitosan Films: Adsorption of Iodine.

ACS Appl Mater Interfaces

January 2025

Univ. Lille, CNRS, Centrale Lille, Univ. Artois, UMR 8181 - UCCS - Unité de Catalyse et Chimie du Solide, Lille F-59000, France.

Metal-organic frameworks (MOFs) combined with polymers as hybrid materials offer numerous advantages such as enhanced performances through synergistic effects at their interface. The primary challenge in developing polymer/MOF hybrid matrix films is ensuring optimal dispersion and strong adhesion of crystalline MOFs to the polymer without aggregation, weak interaction, or phase separation. In this study, hierarchically porous UiO-66_NH/chitosan (ZrCSx-) films were designed by crystallizing UiO-66_NH within a chitosan (CS) skeleton.

View Article and Find Full Text PDF

Polysulfide Tandem Conversion for Lithium-Sulfur Batteries.

Small

January 2025

State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing, 100029, P. R. China.

The electrocatalytic conversion of 16-electron multistep polysulfides is crucial for lithium-sulfur batteries, while it is hard to achieve compatibility between intricate sulfur reduction processes and appropriate catalysts. Herein, a tandem conversion strategy is reported to boost multi-step intermediate reactions of polysulfides transformation by designing an electrocatalyst featuring cobalt and zinc sites (Co/Zn), where the Zn serve as sites for the conversion of long-chain lithium polysulfides (LiPSs), promoting the transformation of S to LiS; the Co sites accelerate the kinetics of the subsequent reduction of LiS. This tandem catalysis method not only enhances the conversion of the initial reactants but also provides additional support for the intermediates, thereby facilitating subsequent reactions to maximize capacity.

View Article and Find Full Text PDF

Bithiophene dicarboxylate as an efficient organic anode material for sodium-ion batteries.

Chem Commun (Camb)

January 2025

Chongqing Key Laboratory of Battery Materials and Technologies, School of Materials & Energy, Southwest University, Chongqing 400715, P. R. China.

In this study, new carboxylates are synthesized for sodium-ion batteries. The bithiophene-based anode material BT demonstrates a high reversible capacity of 201 mA h g and excellent durability. BT retains 99.

View Article and Find Full Text PDF

Using High-Entropy Configuration Strategy to Design Spinel Lithium Manganate Cathodes with Remarkable Electrochemical Performance.

Small

January 2025

National and Local Joint Engineering Laboratory for Lithium-ion Batteries and Materials Preparation Technology, Key Laboratory of Advanced Battery Materials of Yunnan Province, Faculty of Metallurgical and Energy Engineering, Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming, 650093, China.

Owing to its abundant manganese source, high operating voltage, and good ionic diffusivity attributed to its 3D Li-ion diffusion channels. Spinel LiMnO is considered a promising low-cost positive electrode material in the context of reducing scarce elements such as cobalt and nickel from advanced lithium-ion batteries. However, the rapid capacity degradation and inadequate rate capabilities induced by the Jahn-Teller distortion and the manganese dissolution have limited the large-scale adoption of spinel LiMnO for decades.

View Article and Find Full Text PDF

sp-carbon-linked covalent organic frameworks (spc-COFs) are crystalline porous polymers with repeat organic units linked by sp carbons, and have attracted increasing interest due to their robust skeleton and tunable semiconducting properties. Single-crystalline spc-COFs with well-defined structures can represent an ideal platform for investigating fundamental physics properties and device performance. However, the robust olefin bonds inhibit the reversible-reaction-based crystal self-correction, thus yielding polycrystalline or amorphous polymers.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!