Thermodynamics of optoplasmonic heating in fluid-filled gold-nanoparticle-plated capillaries.

Langmuir

Ralph E. Martin Department of Chemical Engineering, 3202 Bell Engineering Center, University of Arkansas, Fayetteville, Arkansas 72701, USA.

Published: June 2011

Dynamic and equilibrium thermal behavior of plasmon-heated gold/silica capillary nanocomposite during evaporative cooling by water or butanol is accurately described at centimeter length scales by continuum optoplasmonic thermodynamics for continuous-wave laser irradiation of 15-50 mW. Gold nanoparticles randomly distributed on the capillary via electroless plating exhibited a composite extinction cross section of 66.74 ± 0.72% of the area of the laser spot, more than 2-fold larger than the physical cross-section of the AuNPs. The extinction cross-section of the AuNPs capillary was invariant for incident laser powers of 15-150 mW and was reduced slightly in the presence of butanol and water due to absorption peak-shifting to lower energies. Introducing composite thermal parameters into the optoplasmonic thermodynamic relation extended its ability to predict heat transfer to laser powers of 100 and 150 mW for water and butanol, respectively. Nonlinear behaviors such as exponential thermal profiles caused by limited thermal conductivity and film boiling are identified at higher laser powers and prevent further extension of the relation. Mathematical reduction of temperature and time variables of the mathematical description shows it accounts for all measured thermodynamic effects when the aforementioned nonlinear behaviors are not present. This confirms that extraordinary thermal transport observed in some nanocomposites are absent for AuNP/silica systems in the given ranges, which allows a macroscale, continuum approach to describe thermal transport.

Download full-text PDF

Source
http://dx.doi.org/10.1021/la200078jDOI Listing

Publication Analysis

Top Keywords

laser powers
12
water butanol
8
cross-section aunps
8
nonlinear behaviors
8
thermal transport
8
thermal
6
laser
5
thermodynamics optoplasmonic
4
optoplasmonic heating
4
heating fluid-filled
4

Similar Publications

Fast-neutron reactors are an important representative of Generation IV nuclear reactors, and due to the unique structure and material properties of fast reactor fuel, traditional mechanical cutting methods are not applicable. In contrast, laser cutting has emerged as an ideal alternative. However, ensuring the stability of optical fibers and laser cutting heads under high radiation doses, as well as maintaining cutting quality after irradiation, remains a significant technical challenge.

View Article and Find Full Text PDF

Stretchable electronics have significant applications in wearable applications. However, the extremely low thermal conductivity of elastic encapsulation hinders heat dissipation, leading to performance degradation. For instance, stretchable thermoelectric devices (TEDs) can be used for skin temperature regulation, but poor thermal management limits their cooling performance.

View Article and Find Full Text PDF

Coherent Anti-Stokes Hyper-Raman Spectroscopy.

Nat Commun

January 2025

Department of Basic Science, Graduate School of Arts and Sciences, The University of Tokyo, 3-8-1 Komaba, Meguro, Tokyo, 153-8902, Japan.

Coherent Raman scattering spectroscopies have been established as a powerful tool for investigating molecular systems with high chemical specificity. The existing coherent Raman scattering techniques detect only Raman active modes, which are a part of the whole molecular vibrations. Here, we report the first observation of coherent anti-Stokes hyper-Raman scattering (CAHRS) spectroscopy, which allows measuring hyper-Raman active vibrations at high speed.

View Article and Find Full Text PDF

Continuous-wave perovskite polariton lasers.

Sci Adv

January 2025

State Key Laboratory of Extreme Photonics and Instrumentation, College of Optical Science and Engineering, International Research Center for Advanced Photonics, Zhejiang University, Hangzhou 310027, China.

Solution-processed semiconductor lasers are next-generation light sources for large-scale, bio-compatible and integrated photonics. However, overcoming their performance-cost trade-off to rival III-V laser functionalities is a long-standing challenge. Here, we demonstrate room-temperature continuous-wave perovskite polariton lasers exhibiting remarkably low thresholds of ~0.

View Article and Find Full Text PDF

Study of Thermal Effects in Fused-Tapered Pure Passive Fibers and Signal Combiners.

Nanomaterials (Basel)

January 2025

School of Physics and Optoelectronic Engineering, Beijing University of Technology, Beijing 100124, China.

This paper investigates the thermal effects in fused-tapered passive optical fibers under near-infrared absorption. The thermal effect is primarily caused by impurities, such as OH-, which absorb incident light and generate heat. Using the finite element method, the volume changes during fiber tapering were simulated, influencing power density and thermal distribution.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!