Greenhouse gas emissions from waste management--assessment of quantification methods.

J Air Waste Manag Assoc

Department of Civil Engineering, University of Toronto, Toronto, Ontario, Canada.

Published: May 2011

Of the many sources of urban greenhouse gas (GHG) emissions, solid waste is the only one for which management decisions are undertaken primarily by municipal governments themselves and is hence often the largest component of cities' corporate inventories. It is essential that decision-makers select an appropriate quantification methodology and have an appreciation of methodological strengths and shortcomings. This work compares four different waste emissions quantification methods, including Intergovernmental Panel on Climate Change (IPCC) 1996 guidelines, IPCC 2006 guidelines, U.S. Environmental Protection Agency (EPA) Waste Reduction Model (WARM), and the Federation of Canadian Municipalities-Partners for Climate Protection (FCM-PCP) quantification tool. Waste disposal data for the greater Toronto area (GTA) in 2005 are used for all methodologies; treatment options (including landfill, incineration, compost, and anaerobic digestion) are examined where available in methodologies. Landfill was shown to be the greatest source of GHG emissions, contributing more than three-quarters of total emissions associated with waste management. Results from the different landfill gas (LFG) quantification approaches ranged from an emissions source of 557 kt carbon dioxide equivalents (CO2e) (FCM-PCP) to a carbon sink of -53 kt CO2e (EPA WARM). Similar values were obtained between IPCC approaches. The IPCC 2006 method was found to be more appropriate for inventorying applications because it uses a waste-in-place (WIP) approach, rather than a methane commitment (MC) approach, despite perceived onerous data requirements for WIP. MC approaches were found to be useful from a planning standpoint; however, uncertainty associated with their projections of future parameter values limits their applicability for GHG inventorying. MC and WIP methods provided similar results in this case study; however, this is case specific because of similarity in assumptions of present and future landfill parameters and quantities of annual waste deposited in recent years being relatively consistent.

Download full-text PDF

Source
http://dx.doi.org/10.3155/1047-3289.61.5.480DOI Listing

Publication Analysis

Top Keywords

greenhouse gas
8
quantification methods
8
ghg emissions
8
waste management
8
ipcc 2006
8
waste
7
emissions
6
quantification
5
gas emissions
4
emissions waste
4

Similar Publications

Rapid urbanization and escalating climate crises place cities at the critical juncture of environmental and public health action. Urban areas are home to more than half of the global population, contributing ~ 75% of global greenhouse gas emissions. Structured surveys were completed by 191 leaders in city governments and civil society from 118 cities in 52 countries (February-April 2024).

View Article and Find Full Text PDF

Electronic devices cover a large subset of daily life gadgets which use power to run, hence increasing the load of the energy needs and indirectly impacting greenhouse gas emissions. Smart electrochromic windows provide a solution to this through remarkable energy saving by adjusting optical behavior depending on the environmental conditions. Since the electrochromic windows also need power to run, a self-powered electrochromic panel will be a better solution.

View Article and Find Full Text PDF

Greenhouse gases (GHGs) have caused great harm to the ecological environment, so it is necessary to screen gas sensor materials for detecting GHGs. In this study, we propose an ideal gas sensor design strategy with high screening efficiency and low cost targeting four typical GHGs (CO, CH, NO, SF). This strategy introduces machine learning (ML) methods based on density functional theory (DFT) to achieve accurate and rapid screening from a large number of candidate gas sensor materials.

View Article and Find Full Text PDF

Modeling Hydrogen Markets: Energy System Model Development Status and Decarbonization Scenario Results.

Energy Clim Chang

December 2024

South China University of Technology, School of Future Technology, 777 Xingye Ave East, Panyu District, Guangzhou, Guangdong, 511442, China.

Hydrogen can be used as an energy carrier and chemical feedstock to reduce greenhouse gas emissions, especially in difficult-to-decarbonize markets such as medium- and heavy-duty vehicles, aviation and maritime, iron and steel, and the production of fuels and chemicals. Significant literature has been accumulated on engineering-based assessments of various hydrogen technologies, and real-world projects are validating technology performance at larger scales and for low-carbon supply chains. While energy system models continue to be updated to track this progress, many are currently limited in their representation of hydrogen, and as a group they tend to generate highly variable results under decarbonization constraints.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!