Surface properties and corrosion resistance analyses of Ti-13Nb-13Zr coated by an oxide film (obtained by micro-arc oxidation at 300 V) or an oxide/hydroxyapatite (HA) film are reported. HA films were biomimetically or electrochemically deposited on the alloy/oxide surface, and their properties compared. Both the biomimetic and the electrochemical method yielded rough and globular apatite surfaces (10-20 μm globules for the former and 1-2 μm for the latter). As inferred from XRD data, the electrochemical method yielded more biologic-like HA films, while the biomimetic method yielded films containing a mixture of calcium phosphate phases. Coated Ti-13Nb-13Zr samples were immersed in an aerated PBS solution and continuously analyzed during 49 days. Considering that, after immersion, the biomimetically deposited films presented smaller variations in thickness and morphology and higher electric resistance (determined by electrochemical impedance spectroscopy), they clearly provide significantly better protection to the Ti-13Nb-13Zr alloy when in PBS solution.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1007/s10856-011-4338-z | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Scalable mechanochemical synthesis of biotin[6]uril.
ChemSusChem
January 2025
Tallinn University of Technology Department of Chemistry and Biotechnology, Department of Chemistry and Biotechnology, Akadeemia tee 15, 12618, Tallinn, ESTONIA.
Biotin[6]uril, a chiral, water-soluble and anion binding macrocycle, is formed via dynamic covalent chemistry. In this study, we present a scalable and high-yielding synthesis of biotin[6]uril via a mechanochemical solid-state approach. The optimized protocol involves mechanical grinding of solid D-biotin with paraformaldehyde in the presence of 0.
View Article and Find Full Text PDFSustainable biomethane production from waste biomass: challenges associated with process optimization in improving the yield.
Environ Sci Pollut Res Int
January 2025
Department of Environmental Biotechnology, Faculty of Energy and Environmental Engineering, Silesian University of Technology, Akademicka Str. 2, 44-100, Gliwice, Poland.
Various novel technologies are currently under development aimed at improving bio-methane output to tackle challenges related to process stability, biogas production, and methane quality in the anaerobic digestion (AD) process. The management of substrate type, temperature, pH, hydraulic retention time (HRT), organic loading rate (OLR), and inoculum origin is essential for ensuring process effectiveness, minimizing inhibition, and maximizing production of biogas and methane yield. The review emphasizes sustainability, focusing on the environmental and economic benefits of anaerobic digestion, including the reduction of greenhouse gas (GHG) emissions, the minimization of landfill waste, and the provision of renewable energy sources.
View Article and Find Full Text PDFA study on antimicrobial activity of lysine-like peptoids for the development of new antimicrobials.
Arch Microbiol
January 2025
SLIIT, Malabe, Sri Lanka.
The development of new medicines with unique methods of antimicrobial action is desperately needed due to the emerging multidrug-resistant bacteria, such as methicillin-resistant Staphylococcus aureus. Therefore, antimicrobial peptoids have emerged as potential new antimicrobials. Thirteen peptoid analogues have been designed and synthesized via solid phase synthesis.
View Article and Find Full Text PDFImproved doramectin production based on high-throughput screening and medium optimization in .
Prep Biochem Biotechnol
January 2025
College of Chemical Engineering, Shijiazhuang University, Shijiazhuang, Hebei Province, China.
Doramectin, a 16-membered macrocyclic lactone that is widely used in the treatment of mammalian parasitic diseases. Doramectin was produced by mutant using cyclohexanecarboxylic acid as a precursor. As a semi-synthetic insecticidal agent produced, the production of doramectin was low, which could not be satisfy the demands of industrial fermentation.
View Article and Find Full Text PDFThe combination of physiology and machine learning for prediction of CPAP pressure and residual AHI in OSA.
J Clin Sleep Med
January 2025
Division of Pulmonary, Critical Care, and Sleep Medicine, UC San Diego, San Diego, CA.
Continuous positive airway pressure (CPAP) is the treatment of choice for obstructive sleep apnea (OSA); however some people have residual respiratory events or require significantly higher CPAP pressure while on therapy. Our objective was to develop predictive models for CPAP outcomes and assess whether the inclusion of physiological traits enhances prediction. We constructed predictive models from baseline information for subsequent residual apnea-hypopnea index (AHI) and optimal CPAP pressure.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!