The biological clock regulates a wide range of physiological processes in plants. Here we show circadian variation of the Clivia miniata responses to electrical stimulation. The biologically closed electrochemical circuits in the leaves of C. miniata (Kaffir lily), which regulate its physiology, were analyzed in vivo using the charge stimulation method. The electrostimulation was provided with different voltages and electrical charges. Resistance between Ag/AgCl electrodes in the leaf of C. miniata was higher at night than during the day or the following day in the darkness. The biologically closed electrical circuits with voltage gated ion channels in C. miniata are activated the next day, even in the darkness. C. miniata memorizes daytime and nighttime. At continuous light, C. miniata recognizes nighttime and increases the input resistance to the nighttime value even under light. These results show that the circadian clock can be maintained endogenously and has electrochemical oscillators, which can activate voltage gated ion channels in biologically closed electrochemical circuits. The activation of voltage gated channels depends on the applied voltage, electrical charge and speed of transmission of electrical energy from the electrostimulator to the C. miniata leaves. We present the equivalent electrical circuits in C. miniata and its circadian variation to explain the experimental data.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jplph.2011.03.012 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Structural Design and Electromagnetic Performance Analysis of Octupole Active Radial Magnetic Bearing.
Sensors (Basel)
December 2024
Zhejiang Institute of Mechanical & Electrical Engineering Co., Ltd., Hangzhou 310051, China.
This study addresses the challenges of magnetic circuit coupling and control complexity in active radial magnetic bearings (ARMBs) by systematically investigating the electromagnetic performance of four magnetic pole configurations (NNSS, NSNS, NNNN, and SSSS). Initially, equivalent magnetic circuit modeling and finite element analysis (FEA) were employed to analyze the magnetic circuit coupling phenomena and their effects on the magnetic flux density distribution for each configuration. Subsequently, the air gap flux density and electromagnetic force were quantified under rotor eccentricity caused by unbalanced disturbances, and the dynamic performances of the ARMBs were evaluated for eccentricity along the x-axis and at 45°.
View Article and Find Full Text PDFJoint Fault Diagnosis of IGBT and Current Sensor in LLC Resonant Converter Module Based on Reduced Order Interval Sliding Mode Observer.
Sensors (Basel)
December 2024
School of Electrical Engineering and Automation, Hefei University of Technology, Hefei 230002, China.
LLC resonant converters have emerged as essential components in DC charging station modules, thanks to their outstanding performance attributes such as high power density, efficiency, and compact size. The stability of these converters is crucial for vehicle endurance and passenger experience, making reliability a top priority. However, malfunctions in the switching transistor or current sensor can hinder the converter's ability to maintain a resonant state and stable output voltage, leading to a notable reduction in system efficiency and output capability.
View Article and Find Full Text PDFAn Investigation into High-Accuracy and Energy-Efficient Novel Capacitive MEMS for Tire Pressure Sensor Application.
Sensors (Basel)
December 2024
School of Instrument and Electronics, North University of China, Taiyuan 030051, China.
Tire pressure monitoring systems (TPMSs) are essential for maintaining driving safety by continuously monitoring critical tire parameters, such as pressure and temperature, in real time during vehicle operation. Among these parameters, tire pressure is the most significant, necessitating the use of highly precise, cost-effective, and energy-efficient sensing technologies. With the rapid advancements in micro-electro-mechanical system (MEMS) technology, modern automotive sensing and monitoring systems increasingly rely on MEMS sensors due to their compact size, low cost, and low power consumption.
View Article and Find Full Text PDFA 6.7 μW Low-Noise, Compact PLL with an Input MEMS-Based Reference Oscillator Featuring a High-Resolution Dead/Blind Zone-Free PFD.
Sensors (Basel)
December 2024
Department of Electrical and Computer Engineering, McGill University, Montreal, QC H3A 0G4, Canada.
This article reports a 110.2 MHz ultra-low-power phase-locked loop (PLL) for MEMS timing/frequency reference oscillator applications. It utilizes a 6.
View Article and Find Full Text PDFThree-Dimensional Surface Reconstruction for Specular/Diffuse Composite Surfaces.
Sensors (Basel)
December 2024
Department of Electrical Engineering, Chinese Culture University, Taipei 11114, Taiwan.
This paper presents an effective three-dimensional (3D) surface reconstruction technique aimed at profiling composite surfaces with both specular and diffuse reflectance. Three-dimensional measurements based on fringe projection techniques perform well on diffuse reflective surfaces; however, when the measurement targets contain both specular and diffuse components, the efficiency of fringe projection decreases. To address this issue, the proposed technique integrates digital holography into the fringe projection setup, enabling the simultaneous capture of both specular and diffuse reflected light in the same optical path for full-field surface profilometry.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!