Nanoflow liquid chromatography/mass spectrometry (nano-LC/MS) has attracted increasing interest in virtue of high sensitivity, low sample consumption, and minimal matrix effect. In this work a HPLC-Chip/quadrupole time-of-flight (Q-TOF) MS device with a new ultra-high capacity small molecule chip (UHC-Chip) which features a 500 nL enrichment column and a 150 mm × 75 μm analytical column, was evaluated with a drug mixture covering a wide range of polarities. Excellent chromatographic precision with 0.1-0.5% RSD for retention time and 1.7-9.0% RSD for peak area, low limit of detection, good chip-to-chip reproducibility and linearity were obtained by using this UHC-Chip. Compared with the standard HPLC-Chip with 40 nL trapping column, the UHC-Chip showed higher enrichment capability and hence gave a higher response in signal detection. Additionally, 4-30 times increase in sensitivity was obtained compared with conventional LC/MS, which indicated that UHC-Chip/MS was a valuable tool for the quantitative analysis of low level impurities and degradation products in pharmaceuticals. Moreover, satisfactory results obtained from trace drug analysis of serum samples further proved its practicality and potential for use in drug testing and development.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.chroma.2011.04.020DOI Listing

Publication Analysis

Top Keywords

ultra-high capacity
8
capacity liquid
4
liquid chromatography
4
chromatography chip/quadrupole
4
chip/quadrupole time-of-flight
4
time-of-flight mass
4
mass spectrometry
4
spectrometry pharmaceutical
4
pharmaceutical analysis
4
analysis nanoflow
4

Similar Publications

Dielectric polymer capacitors suffer from low discharged energy density and efficiency due to their low breakdown strength, small dielectric constant and large electric hysteresis. Herein, a synergistic enhancement strategy is proposed to significantly increase both breakdown strength and dielectric constant while suppressing hysteresis, through introducing 2-dimensional bismuth layer-structured NaBiTiO micro-sheets and designing a unique bilayer structure. Excitingly, an ultra-high discharged energy density of 25.

View Article and Find Full Text PDF

This paper proposes a covert chaotic encryption (CCE) scheme based on compressive sensing (CS). The chaotic sequences used are generated by a six-dimensional hyper-chaotic D-system, where the sequence is utilized for a chaotic index sparse block (CISB), the sequence is used for generating the CS measurement matrix effectively, the , , and sequences are employed for variable-parameter iterative Arnold transformations, and the sequence is used for dual-random least significant bit (LSB) scrambling and embedding. The combination of these technologies enabled the scheme to achieve multi-domain, multi-dimensional, ultra-high-security encryption for multimedia image data.

View Article and Find Full Text PDF

The issues of numerous steel beam components and the tendency for deck cracking under negative bending moment zones have long been challenges faced by traditional composite I-beams with flat steel webs. This study introduces an optimized approach by modifying the structural design and material selection, specifically substituting flat steel webs with corrugated steel webs and using ultra-high-performance concrete for the deck in the negative bending moment zone. Three sets of model tests were conducted to compare and investigate the influence of deck material and web forms on the bending and crack resistance of steel-concrete composite I-beams under a negative bending moment zone.

View Article and Find Full Text PDF

Ultra-high-performance concrete (UHPC) is a cement-based composite material characterised by exceptional strength, low porosity and high durability, making it highly promising for reinforcement engineering. Based on the theory of tangential modulus, a calculation method has been developed for the axial compression capacity of reinforced concrete (RC) medium and long columns strengthened with UHPC, using the constitutive relation of materials and internal and external force balance conditions. This study analysed the influence of UHPC reinforcement layer thickness, reinforced layer, reinforcement ratio, column slenderness ratio and initial load level of core columns on the bearing capacity of reinforced columns.

View Article and Find Full Text PDF

Upcycling of photovoltaic waste graphite into high performance graphite anode.

J Colloid Interface Sci

January 2025

Faculty of Metallurgical and Energy Engineering, Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming 650093 China. Electronic address:

High-value recycling of photovoltaic waste graphite (WG) is an effective path to achieve "carbon neutrality". However, the current most adopted methods are landfilling, incineration and leaching, which can lead to undesirable environmental contamination and waste of resources. Here, an energy-efficient and high-value flash recycling strategy is developed in which photovoltaic WG is converted to high-capacity and high-rate graphite anode for lithium-ion batteries (LIBs) in milliseconds.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!