Statement Of Problem: With the development of various zirconia core shades, questions arise regarding the effect of the shaded zirconia on the translucency of ceramic crowns.
Purpose: The purpose of this study was to investigate the translucency of the 3 Procera Zirconia shaded core materials. The hypothesis was that differences exist in the translucency of various shaded zirconia cores.
Material And Methods: Disk-shaped (0.6 ± 0.01 × 12 mm) zirconia core (Procera Zirconia) specimens (n=90) were fabricated by the manufacturer using a CAD/CAM process. The disks were fabricated in 3 groups according to shade (light, medium, intense) (n=30). A spectrophotometer was used to measure contrast ratio (CR) which is indicative of translucency. One-way ANOVA was conducted to determine significant differences among the shades (α=.05).
Results: A significant difference in translucency between the light and intense shades (P=.030) and the medium and intense shades (P<.001) was observed. There was no significant difference between the light and medium shades (P=.15).
Conclusions: Shaded zirconia is partially translucent. In addition, significant differences in translucency measurements were identified between specific shades.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/S0022-3913(11)60056-5 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Marginal Fit and Fracture Resistance of Vertical Versus Horizontal Margins in Monolithic Zirconia Crowns.
Clin Exp Dent Res
February 2025
Department of Prosthodontics, Faculty of Dentistry, Ibb University, Yemen.
Objective: The use of vertical margin design in all-ceramic restoration has generated inquiries regarding its clinical efficacy under diverse dynamic oral conditions. This research aims to assess the marginal fit and fracture resistance of monolithic zirconia crowns featuring vertical margin design as opposed to those with conventional horizontal margin design.
Materials And Methods: Two metal dies were employed to generate replicated resin dies mimicking mandibular first molar preparation.
Influence of sintering temperature and aging on the color and translucency of zirconia.
J Prosthet Dent
January 2025
Full Professor, Department of Dentistry, Health Sciences Center, Federal University of Santa Catarina (UFSC), Florianópolis, Santa Catarina, Brazil. Electronic address:
Statement Of Problem: Translucent zirconias are promising materials for monolithic prostheses. However, information on their optical behavior after sintering and aging protocols is scarce.
Purpose: The purpose of this in vitro study was to evaluate the color and translucency of zirconia subjected to different sintering temperatures and aging.
Purpose: The study aims to produce CAD-CAM reference samples for shade communication milled from the material of the restoration zirconia (ZrO2) and zirconia-reinforced lithium silicate (ZLS) and evaluate the color difference with the corresponding conventional Vita Classical (VC) shade tab. Furthermore, it aims to verify the color consistency of the materials.
Materials And Methods: Five-five samples were milled out of ZrO2 and ZLS in five different colors and their color parameters were compared with the corresponding VC tabs both visually and digitally.
Effect of aging on the translucency of lithium disilicate and zirconia reinforced lithium silicate ceramics: An study.
Heliyon
December 2024
Prosthodontic Department, College of Medicine and Dentistry, Riyadh Elm University, Riyadh, Saudi Arabia.
Background: Translucency of dental ceramics have great impact on the esthetic and success of dental restorations. The goal of the study is to investigate the effect of the aging process on the translucency of zirconia-reinforced lithium silicate ceramic material, and lithium disilicate ceramic material made using CAD/CAM and press processes.
Methods: Thirty disc-shaped specimens with 0.
Three-unit posterior monolithic fixed dental prostheses made from high-translucent shade-graded zirconia: 3-Year results from a prospective clinical pilot study.
Clin Oral Investig
December 2024
Department of Prosthetic Dentistry, University Hospital, LMU Munich, Goethestraße 70, D-80336, Munich, Germany.
Objectives: To assess the clinical performance of tooth-supported 3-unit fixed dental prostheses (FDPs) made from shade-graded monolithic 5Y-PSZ (partly stabilized zirconia) zirconia in terms of survival rate and the quality of restorations based on modified FDI criteria over three-years.
Materials And Methods: High-translucent shade-graded monolithic zirconia (Lava Esthetic, Solventum Dental Solutions) was used to manufacture maxillary or mandibular three-unit FDPs in the posterior region (N = 22) employing subtractive milling system (Amann Girrbach). All FDPs were bonded with a universal resin cement (Rely X Universal, Solventum Dental Solutions) and evaluated 4 weeks after cementation (baseline) and after 1, 2, and 3 years.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!