Current status and future perspective of flattening filter free photon beams.

Med Phys

Department of Radiotherapy, Division of Medical Radiation Physics, Medical University of Vienna/AKH Vienna, A-1090 Vienna, Austria.

Published: March 2011

Purpose: Flattening filters (FFs) have been considered as an integral part of the treatment head of a medical accelerator for more than 50 years. The reasons for the longstanding use are, however, historical ones. Advanced treatment techniques, such as stereotactic radiotherapy or intensity modulated radiotherapy have stimulated the interest in operating linear accelerators in a flattening filter free (FFF) mode. The current manuscript reviews treatment head physics of FFF beams, describes their characteristics and the resulting potential advantages in their medical use, and closes with an outlook.

Methods: A number of dosimetric benefits have been determined for FFF beams, which range from increased dose rate and dose per pulse to favorable output ratio in-air variation with field size, reduced energy variation across the beam, and reduced leakage and out-of-field dose, respectively. Finally, the softer photon spectrum of unflattened beams has implications on imaging strategies and radiation protection.

Results: The dosimetric characteristics of FFF beams have an effect on treatment delivery, patient comfort, dose calculation accuracy, beam matching, absorbed dose determination, treatment planning, machine specific quality assurance, imaging, and radiation protection. When considering conventional C-arm linacs in a FFF mode, more studies are needed to specify and quantify the clinical advantages, especially with respect to treatment plan quality and quality assurance.

Conclusions: New treatment units are already on the market that operate without a FF or can be operated in a dedicated clinical FFF mode. Due to the convincing arguments of removing the FF, it is expected that more vendors will offer dedicated treatment units for advanced photon beam therapy in the near future. Several aspects related to standardization, dosimetry, treatment planning, and optimization need to be addressed in more detail in order to facilitate the clinical implementation of unflattened beams.

Download full-text PDF

Source
http://dx.doi.org/10.1118/1.3554643DOI Listing

Publication Analysis

Top Keywords

fff mode
12
fff beams
12
treatment
9
flattening filter
8
filter free
8
treatment head
8
unflattened beams
8
treatment planning
8
treatment units
8
beams
6

Similar Publications

This study aimed to evaluate the dosimetric and clinical outcomes of flattening filter (FF) versus flattening filter-free (FFF) beams in head and neck cancer (HNC) patients treated with volumetric modulated arc therapy (VMAT). Twenty-four patients with 70/59.4/54 Gy dose prescribed in 33 fractions with simultaneous integrated boost treatment were retrospectively analyzed to compare treatment delivery efficiency, target coverage, sparing of organs at risk (OARs), and remaining volume at risk (RVR) in two HNC groups (nasopharyngeal and oropharyngeal).

View Article and Find Full Text PDF

Among 3D printing technologies, fused filament fabrication (FFF) is a fast, simple, and low-cost technology that is being explored in a variety of industries. FFF produces composites using thermoplastic filaments, limiting the applicability of welding. Therefore, mechanical fastening is required to join FFF composites with metals or dissimilar materials.

View Article and Find Full Text PDF

Background: Stereotactic arrythmia radioablation (STAR) is a noninvasive technique to treat ventricular tachycardia (VT). Management of cardiorespiratory motion plays an essential role in VT-STAR treatments to improve treatment outcomes by reducing positional uncertainties and increasing dose conformality. Use of an electrocardiogram (ECG) signal, acquired in real-time, as a surrogate to gate the beam has the potential to fulfil that intent.

View Article and Find Full Text PDF

This study explores a novel approach to obtaining 3D printed strain sensors, focusing on how changing the printing conditions can produce a different piezoresistive response. Acrylonitrile butadiene styrene (ABS) filled with different weight concentrations of carbon nanotubes (CNTs) was printed in the form of dog bones via fused filament fabrication (FFF) using two different raster angles (0-90°). Scanning electron microscopy (SEM) and atomic force microscopy (AFM) in TUNA mode (TUNA-AFM) were used to study the morphological features and the electrical properties of the 3D printed samples.

View Article and Find Full Text PDF
Article Synopsis
  • The article examines the fatigue characteristics of acrylonitrile butadiene styrene (ABS) components made using fused filament fabrication (FFF) technology, highlighting the mechanical properties of this widely used thermoplastic material.
  • It aims to determine how different build orientations and angles affect the tensile fatigue behavior of ABS, as current knowledge on this topic is limited.
  • The study finds that ABS samples printed On Edge outperform others in fatigue life, achieving 1592 loading cycles, while Flat and Upright orientations show significantly lower results, emphasizing the critical role of print orientation in the performance of FFF-manufactured ABS materials.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!