In order to establish which are the contribution of linear (total), hyperbolic (partial) or parabolic inhibitions by cellobiose, and also a special case of substrate inhibition, the kinetics of cellobiohydrolase Cel7A obtained from Trichoderma reesei was investigated. Values of kinetic parameters were estimated employing integrated forms of Michaelis-Menten equations through the use of non-linear regression, and criteria for selecting inhibition models are discussed. With cellobiose added at the beginning of the reaction, it was found that cellulose hydrolysis follows a kinetic model, which takes into account a mixed hyperbolic inhibition, by cellobiose with the following parameter values: K (m) 5.0 mM, K (ic) 0.029 mM, K (iu) 1.1 mM, k (cat) 3.6 h(-1) and k (cat') 0.2 h(-1). Cellulose hydrolysis without initial cellobiose added also follows the same inhibition model with similar values (4.7, 0.029 and 1.5 mM and 3.2 and 0.2 h(-1), respectively). According to Akaike information criterion, more complex models that take into account substrate and parabolic inhibitions do not increase the modulation performance of cellulose hydrolysis.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1007/s12010-011-9242-y | DOI Listing |
Molecules
January 2025
Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Longpan Road 159, Nanjing 210037, China.
Under mild conditions, formic acid effectively separates the components of lignocellulose, removing the majority of the hemicellulose and lignin from the cellulose. However, it has not yet been determined if multiple treatments with fresh formic acid may totally remove hemicellulose and lignin. In this study, fresh formic acid was used to repeatedly pretreat the bamboo powder, and the effect of multiple treatments on the physicochemical structure of the bamboo powder was investigated using changes in fractions, enzymatic hydrolysis, hydrophilicity, cellulose crystallinity, and lignin structure.
View Article and Find Full Text PDFMolecules
January 2025
Plant Fiber Material Science Research Center, State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510640, China.
Cellulose nanocrystals (CNCs) prepared by sulfuric acid hydrolysis were added to phthalocyanine green colour pastes with a surfactant to improve stability. The particle size, zeta potential, absorbance, and microstructure of the colour pastes were analyzed and characterized. The mechanism of CNCs to enhance the stability of hydrophobic phthalocyanine green in water was investigated.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
Department of Chemical and Petroleum Engineering, Sharif University of Technology, P.O. Box 11155-9465, Tehran, Iran.
This study presents the development of biocompatible and biodegradable nanocomposites utilizing renewable cellulose nanocrystals (CNCs) in polycaprolactone (PCL)-based polyurethane acrylates (PUA) through in situ polymerization. First, CNCs were derived from cotton linter via acid hydrolysis; then functionalized with 3-methacryloxypropyltrimethoxysilane to produce silane-modified CNCs (S-CNCs). CNCs offered uniform dispersion in PUA up to 2 wt% loading, resulting in significant property enhancements, including ~60 % increase in tensile strength and ~25 % increase in Young's modulus.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
Natural Composites Research Group Lab, Department of Mechanical and Process Engineering, The Sirindhorn International Thai-German Graduate School of Engineering (TGGS), King Mongkut's University of Technology North Bangkok (KMUTNB), Bangkok 10800, Thailand.
This study addresses the issue of waste generation within the food industry, focusing on the conversion of rice husk waste into value-added products. The investigation involves a comprehensive characterization of microcrystalline cellulose extracted from the rice husk and reinforcing them in bio-epoxy resin to determine its feasibility in producing ecofriendly products. The dried rice husk waste was made to undergo a series of treatments, including alkali, acid hydrolysis, and bleaching for extracting high purity microcrystalline cellulose.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
School of Chemical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan, Gyeongbuk 38541, Republic of Korea. Electronic address:
The creation of polymer composites with better performance is a crucial thing. The cellulosic filler material gain popularity in polymer composites. In this study, aquatic plant Pistia stratiote leaves were used as a raw material for cellulose extraction.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!