Five different strains of white-rot fungi have been tested for their ability to decolorize black liquor on plates and on solid-state fermentation using vermiculite as the solid inert support. Since the high salt concentration inhibited the growth of all fungi, the black liquor was dialyzed against distilled water prior to use. A preliminary step on plates was carried out to qualitatively determine the capacity of the fungal strains for black liquor decolorization. Out of the five fungi studied, Phanerochaete sordida, Pycnoporus sanguineus, and Trametes elegans exhibited the more conspicuous decolorization halos in malt extract medium, while the decolorization by all the strains was not evident when a defined culture medium was used. Cultures on solid-state fermentation using vermiculite as solid support were also tested, the liquid phase was malt extract or glucose-based medium and supplemented with different black liquor concentrations. Decolorization of black liquor was largely affected by the fungal strain, the concentration of black liquor, and the carbon source. The percentage of color removal ranged from 6.14% to 91.86% depending on the fungal strain and culture conditions. Maximal decolorization was observed in malt extract cultures after 60 cultivation days. Interestingly, decolorization in malt extract medium increased with increasing black liquor concentration. The highest decolorization value was achieved by Steccherinum sp. which reduced up to 91.86% the color of the black liquor in malt extract medium; this percentage is equivalent to 5.2 g L(-1) of decolorized black liquor, the highest value reported to date. Traditional technologies used for the treatment of black liquor are not always effective and may not to be an environmentally friendly process. Vermiculite-white-rot fungi systems are presented in this work as a promising efficient alternative for the treatment of black liquor.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1007/s12010-011-9260-9 | DOI Listing |
Sci Total Environ
December 2024
Instituto de Investigaciones para la Industria Química (INIQUI), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) - Universidad Nacional de Salta (UNSa), Argentina; Facultad de Ciencias Naturales, UNSa, Argentina. Electronic address:
In this study, five strains previously isolated from black liquor (BL) and vinasse (V) were tested to assess the most promising regarding its capacity of biosurfactant production. For that, four factorial designs of two factors at two levels (2) were run for each strain. Selected factors were the production time and the composition media, while the surface tension reduction and optical density were the responses variables.
View Article and Find Full Text PDFJ Urban Health
December 2024
Department of Surgery, Grossman School of Medicine, New York, NY, USA.
Sexually minoritized men (SMM), transgender women (TW), and particularly Black SMM and Black TW may be disproportionately impacted by alcohol-related problems. Few studies have empirically examined neighborhood factors that may contribute to alcohol use, specifically among these populations. Using data from the N2 longitudinal cohort study in Chicago, IL, survey data from the second wave of longitudinal assessment (n = 126) and GPS mobility data from enrollment were used to evaluate neighborhood alcohol outlet availability, neighborhood disorder, and neighborhood poverty as correlates of individual alcohol use.
View Article and Find Full Text PDFPolymers (Basel)
December 2024
Department of Plant and Soil Science, Fiber and Biopolymer Research Institute, Texas Tech University, Lubbock, TX 79409, USA.
By reflecting on the history and environmental impact of conventional biorefining, such as kraft pulping, we aim to explore important questions about how natural polymers can be more sustainably sourced to develop bio-products and reduce reliance on plastics. Since the Industrial Revolution, chemical pulping processes have enabled the mass production of cellulosic products from woody biomass. Kraft pulping, which dominates within modern pulp and paper mills, has significantly contributed to environmental pollution and carbon emissions due to sulfurous byproducts and its high water and energy consumption.
View Article and Find Full Text PDFMolecules
November 2024
National Research and Development Institute for Cryogenic and Isotopic Technologies-ICSI Ramnicu Valcea, 4th Uzinei Street, 240050 Ramnicu Valcea, Romania.
The paper manufacturing process produces liquid and gaseous alternative fuels, as well as solid wastes. These can be subsequently treated through chemical processing, oxidation, and thermal activation, resulting in adsorbent materials with CO adsorption capacities. The valorisation of black liquor waste resulting from paper manufacturing was achieved through a catalytic pyrolysis process using two catalysts previously prepared in house (Cu-Zn-MCM-41 and Ni-SBA-16).
View Article and Find Full Text PDFNanomaterials (Basel)
November 2024
College of Textile and Clothing, Dezhou University, Dezhou 253026, China.
China is the country with the most abundant bamboo resources in the world. Using bamboo as a raw material for pulping and papermaking can save a lot of wood and protect forests. Bamboo pulping enterprises mostly adopt sulfate processes to produce a large amount of black liquor (BL), which contains monosaccharides, polysaccharides, oligosaccharides, pectin, lignin, etc.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!