Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1038/472041a | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Perovskite/Silicon Tandem Solar Cells Above 30% Conversion Efficiency on Submicron-Sized Textured Czochralski-Silicon Bottom Cells with Improved Hole-Transport Layers.
ACS Appl Mater Interfaces
November 2024
Institute of Electrical and Microengineering (IEM), Photovoltaics and Thin-Film Electronics Laboratory (PV-Lab), École Polytechnique Fédérale de Lausanne (EPFL), Rue de la Maladière 71b, 2000 Neuchâtel, Switzerland.
Article Synopsis
- * Combining two phosphonic acid compounds, Me-4PACz and another PA with different functional groups, enhances film formation, improves charge transport, and reduces energy losses at the interface.
- * Achieving a high current density of 40.2 mA/cm and greater than 30% power conversion efficiency, this research showcases the potential for creating highly efficient and industry-compatible tandem solar cells.
Ultrafast Charge and Exciton Diffusion in Monolayer Films of 9-Armchair Graphene Nanoribbons.
Adv Mater
December 2024
Catalan Institute of Nanoscience and Nanotechnology (ICN2), CSIC and BIST, Campus UAB, Bellaterra, Barcelona, 08193, Spain.
Article Synopsis
- * Researchers used spatiotemporal microscopy and quantum transport calculations to observe how charge carriers behave in these nanoribbons after being photoexcited, revealing high mobility and diffusivity.
- * Findings suggest that the impressive charge carrier mobility is due to minimal interference from defects and inter-ribbon hopping, supporting the viability of graphene nanoribbons for efficient electronic applications.
Mechanisms of Controllable Growth and Ohmic Contact of Two-Dimensional Molybdenum Disulfide: Insight from Atomistic Simulations.
Acc Chem Res
December 2024
Key Laboratory of Quantum Materials and Devices of Ministry of Education, School of Physics, Southeast University, Nanjing 211189, China.
Article Synopsis
- - The rise of two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs), specifically molybdenum disulfide (MoS), is driven by their suitable bandgap, high mobility, and potential for integration in future electronics, aligning with advancements that aim to push the boundaries of Moore's law beyond silicon-based technologies.
- - While initial MoS devices show promise with high current ratios and low power consumption, significant challenges remain, including the need for uniform, wafer-scale single-crystal MoS growth and precise layer control due to the layer-dependent properties crucial for device performance.
- - Additionally, issues like high sulfur vacancy density affecting electronic characteristics and high electrical resistance at metal-semiconductor contacts are limiting
Selenium-alloyed tellurium oxide for amorphous p-channel transistors.
Nature
May 2024
Department of Chemical Engineering, Pohang University of Science and Technology, Pohang, Republic of Korea.
Article Synopsis
- Amorphous semiconductors are cheaper and easier to manufacture than polycrystalline ones, but traditional types like hydrogenated silicon lack good electrical properties, driving the search for new materials.
- The development of high-mobility n-type metal oxides, like a-InGaZnO, has improved large-area electronics and displays, but creating effective p-type materials remains a challenge, which limits progress in integrated circuits.
- The researchers propose a new design for p-type semiconductors using a tellurium-based matrix, demonstrating high-performance p-channel transistors with impressive mobility and stability, marking a significant step towards affordable, commercial amorphous electronics.
Tuning Surface Defect States in Sputtered Titanium Oxide Electron Transport Layers for Enhanced Stability of Organic Photovoltaics.
ACS Appl Mater Interfaces
April 2024
Mads Clausen Institute, Center for Advanced Photovoltaics and Thin Film Energy Devices (SDU CAPE), University of Southern Denmark, So̷nderborg 6400, Denmark.
Article Synopsis
- * Recent studies indicate that the photocatalytic breakdown of NFA molecules at metal oxide electron transport layer (ETL) interfaces is a key factor in device degradation.
- * This research shows that using sputtered titanium oxide layers as ETLs can notably improve the longevity of NFA-based OPVs by reducing defect states and photocatalytic degradation, achieving around 10% efficiency and enhanced stability in a scalable manner.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!