Devices made from stretchable electronic materials could be incorporated into clothing or attached directly to the body. Such materials have typically been prepared by engineering conventional rigid materials such as silicon, rather than by developing new materials. Here, we report a class of wearable and stretchable devices fabricated from thin films of aligned single-walled carbon nanotubes. When stretched, the nanotube films fracture into gaps and islands, and bundles bridging the gaps. This mechanism allows the films to act as strain sensors capable of measuring strains up to 280% (50 times more than conventional metal strain gauges), with high durability, fast response and low creep. We assembled the carbon-nanotube sensors on stockings, bandages and gloves to fabricate devices that can detect different types of human motion, including movement, typing, breathing and speech.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1038/nnano.2011.36 | DOI Listing |
Small
January 2025
Guangzhou Institute of Blue Energy, Knowledge City, Huangpu District, Guangzhou, 510555, P. R. China.
Physiological wound healing process can restore the functional and structural integrity of skin, but is often delayed due to external disturbance. The development of methods for promoting the repair process of skin wounds represents a highly desired and challenging goal. Here, a flexible, self-powered, and multifunctional triboelectric nanogenerator (TENG) wound patch (e-patch) is presented for accelerating wound healing through the synergy of electrostimulation and photothermal effect.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2025
National Engineering Lab of Special Display Technology, Special Display and Imaging Technology Innovation Center of Anhui Province, Academy of Optoelectronic Technology, Hefei University of Technology, Hefei 230009, China.
Flexible sensors mimic the sensing ability of human skin, and have unique flexibility and adaptability, allowing users to interact with intelligent systems in a more natural and intimate way. To overcome the issues of low sensitivity and limited operating range of flexible strain sensors, this study presents a highly innovative preparation method to develop a conductive elastomeric sensor with a cracked thin film by combining polydimethylsiloxane (PDMS) with multiwalled carbon nanotubes (MCNT). This novel design significantly increases both the sensitivity and operating range of the sensor (strain range 0-50%; the maximum tensile sensitivity of this sensor reaches 4.
View Article and Find Full Text PDFNanotechnol Sci Appl
December 2024
Institute of Mechanics and Printing, Faculty of Mechanical and Industrial Engineering, Warsaw University of Technology, Warsaw, Poland.
Introduction: The rapid growth of flexible and wearable electronics has created a need for materials that offer both mechanical durability and high conductivity. Textile electronics, which integrate electronic pathways into fabrics, are pivotal in this field but face challenges in maintaining stable electrical performance under mechanical strain. This study develops highly stretchable silver multi-walled carbon nanotube (Ag-MWCNT) composites, tailored for screen printing and heat-transfer methods, to address these challenges.
View Article and Find Full Text PDFInt J Biol Macromol
December 2024
State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi 830017, Xinjiang, PR China. Electronic address:
Stretchable conductive hydrogels have attracted great attention in flexible electronics. Nevertheless, conductive hydrogels would suffer from an inevitable damage during use, significantly reducing the reliability and limiting the practicability. Herein, stretchable and self-healing conductive hydrogels are designed form carboxymethyl cellulose (CMC), polyacrylic acid (PAA), and Fe, which are applied for monitoring human motions and electrophysiological signals.
View Article and Find Full Text PDFHeliyon
December 2024
Material Science and Engineering Research Group, Faculty of Mechanical and Aerospace Engineering, Institut Teknologi Bandung, Jl. Ganesa 10, Bandung, 40132, Indonesia.
The advancement of wearable devices and soft robots requires soft and stretchable sensors to detect their movements. This article proposes palm oil as an organic solvent for a stretchable piezoresistive strain sensor made from a composite consisting of elastomer (Ecoflex 00-30) filled with carbon black. The high content of palmitic acid in the palm oil increases the dispersity of carbon black in the composite, hence effectively improving the conductivity of the sensors.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!