Tetraethylorthosilicate (TEOS) is added to a pure-silica-zeolite MEL nanoparticle suspension and the mixture is subsequently used for preparing spin-on low-dielectric constant (low-k) films. The films are then characterized by ellipsometric porosimetry, transmission electron microscopy (TEM), and nanoindentation. Investigation into the film microstructure indicates that the addition of TEOS significantly increases the fraction of the crystalline domains, decreases the inter-crystal mesopore size, and narrows the pore size distribution. Films with 12% TEOS loading have a mean pore size distribution centered at 3.5 nm (diameter) with a full width at half maximum (fwhm) of 0.8 nm, while those with no TEOS have a distribution at 11.1 nm and fwhm of 7.9 nm. At 12% TEOS loading, the reduced modulus and hardness are 11.0 and 1.12 GPa, respectively; without TEOS, the values are 6.4 and 0.57 GPa.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/la200603z | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Effect of Reaction Interface Structure on the Morphology and Performance of Thin-Film Composite Membrane.
Environ Sci Technol
January 2025
Jiangsu Key Laboratory of Anaerobic Biotechnology, School of Environment and Ecology, Jiangnan University, Wuxi 214122, PR China.
Thin-film composite (TFC) membrane has been extensively utilized and investigated for its excellent properties. Herein, we have constructed an active layer (AL) containing cave-like structures utilizing large meniscus interface. Furthermore, the impact of interface structure on the growth process, morphology, and effective surface area of AL has been fully explored with the assistance of sodium dodecyl benzenesulfonate (SDBS).
View Article and Find Full Text PDFCreating an extracellular matrix-like three-dimension structure to enhance the corrosion resistance and biological responses of titanium implants.
J Dent Sci
December 2024
Liaison Center for Innovative Dentistry, Graduate School of Dentistry, Tohoku University, Sendai, Japan.
Background/purpose: Titanium (Ti) is extensively used in dental and orthopedic implants due to its excellent mechanical properties. However, its smooth and biologically inert surface does not support the ingrowth of new bone, and Ti ions may have adverse biological effects. The purpose is to improve the corrosion resistance of titanium and create a 3D structured coating to enhance osseointegration through a very simple and fast surface treatment.
View Article and Find Full Text PDFPore Chemical Modification of Bimetallic Coordination Networks for Coal-Bed Methane Purification under Humid Conditions.
Inorg Chem
January 2025
School of Chemical Engineering and Technology, Xi'an Jiaotong University, Xi'an 710049, China.
The recycling of low-concentration coal-bed methane (CBM) is environmentally beneficial and plays a crucial role in optimizing the energy mix. In this work, we present a strategy involving pore chemical modification to synthesize a series of bimetallic diamond coordination networks, namely CuIn(ina), CuIn(3-ain), and CuIn(3-Fina) (where ina = isonicotinic acid, 3-ain = 3-amino-isonicotinic acid, and 3-Fina = 3-fluoroisonicotinic acid). Among these, the amino-functionalized CuIn(3-ain) exhibits excellent CH adsorption capacity (1.
View Article and Find Full Text PDFOperando X-Ray Tomoscopy of Laser Beam Welding.
Adv Sci (Weinh)
January 2025
Institute of Applied Materials, Helmholtz-Zentrum Berlin für Materialien und Energie, Hahn-Meitner-Platz 1, 14109, Berlin, Germany.
The phenomena occurring in a weld seam during advancement of a laser beam over a metallic component are still under dispute. The occurrence and evolution of porosity and the occasional blowout of melt need to be understood. Here, a recently developed X-ray tomoscopy setup is applied, providing one hundred 3D images per second to capture the temporal evolution of the melt pool in an AlSi9Cu3(Fe) die-casting while a laser beam advances.
View Article and Find Full Text PDFPorous Organic Polymers Incorporating Shape-persistent Cyclobenzoin Macrocycles for Organic Solvent Separation.
Angew Chem Int Ed Engl
January 2025
University of Fribourg: Universite de Fribourg, Department of Chemistry, Chemin du Musée 9, 1700, Fribourg, SWITZERLAND.
The recovery and separation of organic solvents is highly important for the chemical industry and environmental protection. In this context, porous organic polymers (POPs) have significant potential owing to the possibility of integrating shape-persistent macrocyclic units with high guest selectivity. Here, we report the synthesis of a macrocyclic porous organic polymer (np-POP) and the corresponding model compound by reacting cyclotetrabenzil naphthalene octaketone macrocycle with 1,2,4,5-tetraaminobenzene and 1,2-diaminobenzene, respectively, under solvothermal conditions.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!