AI Article Synopsis

  • - The formation of vertically aligned carbon nanotube (CNT) forests is influenced by the geometry of gas flow during the chemical vapor deposition (CVD) process, affecting their growth directions.
  • - By adjusting the growth time, flow rate, and gas direction, researchers found that local gas flow variations, especially from microchannels, significantly impact the direction and angle of CNT growth.
  • - A computational fluid dynamics (CFD) model helped explain the impact of gas flow on CNT directionality, suggesting that manipulation of local pressure in the microchannels could enhance control over CNT structures for various applications.

Article Abstract

We demonstrated that the structural formation of vertically aligned carbon nanotube (CNT) forests is primarily affected by the geometry-related gas flow, leading to the change of growth directions during the chemical vapor deposition (CVD) process. By varying the growing time, flow rate, and direction of the carrier gas, the structures and the formation mechanisms of the vertically aligned CNT forests were carefully investigated. The growth directions of CNTs are found to be highly dependent on the nonlinear local gas flows induced by microchannels. The angle of growth significantly changes with increasing gas flows perpendicular to the microchannel, while the parallel gas flow shows almost no effect. A computational fluid dynamics (CFD) model was employed to explain the flow-dependent growth of CNT forests, revealing that the variation of the local pressure induced by microchannels is an important parameter determining the directionality of the CNT growth. We expect that the present method and analyses would provide useful information to control the micro- and macrostructures of vertically aligned CNTs for various structural/electrical applications.

Download full-text PDF

Source
http://dx.doi.org/10.1088/0957-4484/22/9/095303DOI Listing

Publication Analysis

Top Keywords

vertically aligned
12
cnt forests
12
carbon nanotube
8
chemical vapor
8
vapor deposition
8
gas flow
8
growth directions
8
gas flows
8
induced microchannels
8
growth
6

Similar Publications

Fast-Charging Lithium-Ion Batteries Enabled by Magnetically Aligned Electrodes.

ACS Nano

January 2025

Materials Science and Engineering Program and Walker Department of Mechanical Engineering, The University of Texas at Austin, Austin, Texas 78712, United States.

With the increasing popularity of electric transportation over the past several years, fast-charging lithium-ion batteries are highly demanded for shortening electric vehicles' charging time. Extensive efforts have been made on material development and electrode engineering; however, few of them are scalable and cost-effective enough to be potentially incorporated into the current battery production. Here, we propose a facile magnetic templating method for preparing LiFePO (LFP) cathodes with vertically aligned graphene sheets to realize fast-charging properties at a practical loading of 20 mg cm.

View Article and Find Full Text PDF

Nanostructure engineering for ferroelectric photovoltaics.

Nanoscale

January 2025

Research School of Chemistry, The Australian National University, Canberra, ACT 2601, Australia.

Ferroelectric photovoltaics have attracted increasing attention since their discovery in the 1970s, due to their above-bandgap photovoltage and polarized-light-dependent photocurrent. However, their practical applications have been limited by their weak visible light absorption and low photoconductivity. Intrinsic modification of the material, such as bandgap tuning through chemical doping, has proven effective, but usually leads to the degradation of ferroelectricity.

View Article and Find Full Text PDF

Introduction: Ankylosing Spondylitis (AS) presents a complex inflammatory condition with significant impact on patients' lives. Despite advancements in understanding its pathogenesis, comprehensive elucidation remains elusive. This study investigates the outcomes of corrective spine surgery in AS patients, aiming to optimize management strategies.

View Article and Find Full Text PDF

Asymmetric self-organization from a symmetric film by phase separation.

Nanoscale

January 2025

Department of Materials Science and Engineering, Kyushu Institute of Technology, 1-1 Sensui-cho, Tobata-ku, Kitakyushu 804-8550, Japan.

Self-organization realizes various nanostructures to control material properties such as superconducting vortex pinning and thermal conductivity. However, the self-organization of nucleation and growth is constrained by the growth geometric symmetry. To realize highly controlled three-dimensional nanostructures by self-organization, nanostructure formation that breaks the growth geometric symmetry thermodynamically and kinetically, such as tilted or in-plane aligned nanostructures, is a challenging issue.

View Article and Find Full Text PDF

Slopes influenced by multiple faults are prone to large-scale landslides triggered by multi-regional failures. Understanding the failure process and sequence is essential for the sustainable development of mining operations. This paper presents a method combining InSAR monitoring and numerical simulation to analyze the failure processes of slopes affected by multiple faults.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!