In this work, sediment microbial fuel cell (SMFC) with granule activated carbon (GAC) cathode and stainless steel anode was constructed in laboratory tests and various factors on SMFC power output were investigated. The maximum power densities for the SMFC with GAC cathode was 3.5 mW m(-2), it was much higher than SMFC with round stainless steel cathode. Addition of cellulose reduced the output power from SMFC at the beginning of experiments, while the output power was found to increase after adding cellulose to sediments on day 90 of operation. On 160 day, maximum power density from the SMFC with adding 0.2% cellulose reached to 11.2 mW m(-2). In addition, the surface morphology of stainless steel anode on day 90 was analyzed by scanning electron microscope. It was found that the protection layer of the stainless steel as electrode in SMFCs was destroyed to some extent.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1007/s00449-010-0511-x | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Fabrication and characterization of chitosan-based bionanocomposite coating reinforced with TiO nanoparticles and carbon quantum dots for enhanced antimicrobial efficacy.
Int J Biol Macromol
January 2025
Department of Materials Engineering, Materials and Energy Research Center, Dezful Branch, Islamic Azad University, Dezfool, Iran.
Polymer-based nanocomposite coatings that are enhanced with nanoparticles have gained recognition as effective materials for antibacterial purposes, providing improved durability and biocidal effectiveness. This research introduces an innovative chitosan-based polymer nanocomposite, enhanced with titanium oxide nanopowders and carbon quantum dots. The material was synthesized via the sol-gel process and applied to 316L stainless steel through dip-coating.
View Article and Find Full Text PDFEfficacy of different endodontic irrigants in the lesion sterilization and tissue repair technique in primary molars: A randomized controlled clinical trial.
J Indian Soc Pedod Prev Dent
October 2024
Department of Pediatric and Preventive Dentistry, Subharti Dental College and Hospital, Swami Vivekanand Subharti University, Meerut, Uttar Pradesh, India.
Background And Aim: This study aims to evaluate the efficacy of different endodontic irrigants employed in the lesion sterilization and tissue repair (LSTR) technique.
Methods: Forty children aged 4-8 years having at least one primary molar with irreversible pulpitis/pulpal necrosis indicated for pulpectomy were included. Participants were randomly divided into three test groups (Group A, B, and C) and one control group (Group D).
Dynamic Electrochemical Impedance Spectroscopy in Galvanostatic Mode as a Tool for Passive Layer State Monitoring in a Chloride Solution Under a Mechanical Load.
Materials (Basel)
January 2025
Department of Corrosion and Electrochemistry, Faculty of Chemistry, Gdansk University of Technology, Narutowicza 11/12 Str., 80-233 Gdansk, Poland.
Mechanical stress is one of the factors influencing the initiation of pitting corrosion and deterioration of the protective properties of the passive layer on stainless steel. The tests carried out on AISI 304L stainless steel showed that, in the 3.5% NaCl environment for samples loaded in the elastic and plastic range, no pitting corrosion initiation was observed.
View Article and Find Full Text PDFA Dynamic Tensile Method Using a Modified M-Typed Specimen Loaded by Split Hopkinson Pressure Bar.
Materials (Basel)
January 2025
Key Laboratory of Impact and Safety Engineering (Ningbo University), Ministry of Education, Ningbo 315211, China.
Obtaining reliable dynamic mechanical properties through experiments is essential for developing and validating constitutive models in material selection and structural design. This study introduces a dynamic tensile method using a modified M-type specimen loaded by a split Hopkinson pressure bar (SHPB). A closed M-type specimen was thus employed.
View Article and Find Full Text PDFHydrogen-Free Plasma Nitriding Process for Fabrication of Expanded Austenite Layer on AISI 316 Stainless Steel Surface.
Materials (Basel)
January 2025
Faculty of Engineering, Kitami Institute of Technology, 165 Koen-cho, Kitami 090-8507, Hokkaido, Japan.
The addition of hydrogen to nitrogen facilitates the formation of nitride phases in the plasma nitriding processes of stainless steels, though it also induces the deterioration of their mechanical properties. This study presents a hydrogen-free plasma nitriding process for fabricating a nitrogen-expanded austenite phase (γ) on an AISI 316 stainless steel surface. The steel substrate was nitrided in N-Ar plasma with various gas compositions discharged by radio frequency (RF) and direct current (DC) modes.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!