We present a new variant of a noncontact, oblique incidence spatially resolved reflectance setup. The continuously variable source detector separation enables adaptation to high and low albedo samples. Absorption (μ(a)) and reduced scattering coefficients (μ(') (s)) are determined in the wavelength range of 400-1000 nm using a lookup table, calculated by a Monte Carlo simulation of the light transport. The method is characterized by an silicone phantom study covering a wide parameter range 0.01 mm(-1) ≤ μ(a) ≤ 2.5 mm(-1) and 0.2 mm(-1) ≤ μ(') (s) ≤ 10 mm(-1), which includes the optical parameters of tissue in the visible and near infrared. The influence of the incident angle and the detection aperture on the simulated remission was examined. Using perpendicular incidence and 90-deg detection aperture in the Monte Carlo simulation in contrast to the experimental situation with 30-deg incidence and 4.6-deg detection aperture is shown to be valid for the parameter range μ(') (s) > 1 mm(-1) and μ(a) < 1.2 mm(-1). A Mie calculation is presented, showing that a decreasing reduced scattering coefficient for increasing absorption can be the consequence of real physics instead of cross talk.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1117/1.3526367 | DOI Listing |
Optical metasurfaces offer significant advantages in enhancing the speed, efficiency, and miniaturization of imaging systems. However, most existing metasurfaces are limited to static functionalities and lack reconfigurability, which is a key feature for practical applications in dynamic environments. In this work, we demonstrate a reconfigurable optical metasurface capable of switching between two distinct imaging functions (edge detection and bright-field imaging) within the visible spectrum.
View Article and Find Full Text PDFRegulating the proportion of low-order aberrations within total aberrations can effectively alter the tilt-to-length (TTL) coupling noise in a space gravitational wave telescope. Nevertheless, the low-order aberration ratio is disrupted during the actual manufacturing of the telescope. To address this issue, we analyzed the impacts of wavefront errors and low-order aberration proportions on the TTL coupling noise, determined the design requirements, and designed a 400 mm-aperture space gravitational wave telescope optical system.
View Article and Find Full Text PDFThe technique of spectral polarization imaging (SPI) is a potent detection tool in various fields due to its ability to capture multi-dimensional information. However, existing SPI systems usually face challenges associated with architectural complexity and computational requirements, rendering them unsuitable for handheld, on-board, and real-time applications. Consequently, a compact single-shot multispectral polarization imager (CSMPI) is proposed, which employs a combined spectral-polarization encoding strategy to address the aforementioned issues.
View Article and Find Full Text PDFCoherence scanning interferometry (CSI) is a non-destructive method for measuring the microstructure surface topography, but it fails to retrieve the bottom topography because the detection light is blocked by the sidewalls of the high aspect ratio (HAR) samples. Our team has proposed CSI technology with the detection light transparent to the sample to measure the surface topography thus ensuring the numerical aperture of the detection light with high throughput. However, a dedicated optical path to monitor the aberrations caused by the modulation from the sample is necessary and a complex optical path is added for aberration correction, which inevitably increases the design complexity and component costs of the optical system.
View Article and Find Full Text PDFSci Rep
January 2025
School of Transportation and Geometics Engineering, Yangling Vocational & Technical College, Yangling, 712100, Shaanxi, China.
This work aims to improve the accuracy and efficiency of flood disaster monitoring, including monitoring before, during, and after the flood, to achieve accurate extraction of flood disaster change information. A modified U-Net network model, incorporating the Transformer multi-head attention mechanism (TM), is developed specifically for the characteristics of Synthetic Aperture Radar (SAR) images. By integrating the TM, the model effectively prioritizes image regions relevant to flood disasters.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!