The well aligned multiwalled carbon nanotube arrays were synthesized by injecting the acetonitrile-ferrocene solution at regular intervals of time. The carbon nanotube arrays were deposited on quartz substrate which is placed at the centre of the CVD reactor in quartz tube. The injection method in chemical vapor deposition allows-excellent control of the catalyst to carbon ratio which facilitates the better growth of aligned carbon nanotubes. The effect of various reaction parameters such as growth temperature, catalyst concentration, gas flow rate, growth time and substrate surface on growth of carbon nanotubes have been studied. It was observed that the diameter of carbon nanotubes increases with increase in catalyst concentration and temperature of the synthesis. The SEM analysis reveals that the average growth rate of carbon nanotube film synthesis was about 1.1 microm/min when the synthesis time was one hour.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1166/jnn.2010.2427 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Flexible Triboelectric Nanogenerator Patch for Accelerated Wound Healing Through the Synergy of Electrostimulation and Photothermal Effect.
Small
January 2025
Guangzhou Institute of Blue Energy, Knowledge City, Huangpu District, Guangzhou, 510555, P. R. China.
Physiological wound healing process can restore the functional and structural integrity of skin, but is often delayed due to external disturbance. The development of methods for promoting the repair process of skin wounds represents a highly desired and challenging goal. Here, a flexible, self-powered, and multifunctional triboelectric nanogenerator (TENG) wound patch (e-patch) is presented for accelerating wound healing through the synergy of electrostimulation and photothermal effect.
View Article and Find Full Text PDFCommercial SiO Encapsulated in Hybrid Bilayer Conductive Skeleton as Stable Anode Coupling Chemical Prelithiation for Lithium-Ion Batteries.
Small
January 2025
Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology, School of Chemistry and Chemical Engineering, Guangxi University, Nanning, 530004, P. R. China.
Although Silicon monoxide (SiO) is regarded as the most promising next-generation anode material, the large volume expansion, poor conductivity, and low initial Coulombic efficiency (ICE) severely hamper its commercialization application. Designing a multilayer conductive skeleton combined with advanced prelithiation technology is considered an effective approach to address these problems. Herein, a reliable strategy is proposed that utilizes MXene and carbon nanotube (CNT) as dual-conductive skeletons to encapsulate SiO through simple electrostatic interaction for high-performance anodes in LIBs, while also performing chemical prelithiation.
View Article and Find Full Text PDFMicrowave-synthesized NiZrO@GNP and NiZrO3@MWCNT nanocomposites: enhanced antimicrobial efficacy against biofilms and .
3 Biotech
February 2025
Catalysis and Nanomaterials Research Laboratory, Department of Chemistry, Loyola College, Chennai, Tamil Nadu 600034 India.
Unlabelled: The persistent challenge posed by antibiotic-resistant bacteria and tuberculosis necessitates innovative approaches to antimicrobial treatment. This study explores the synthesis and characterization of NiZrO₃ nanoparticles integrated with graphene nanoplatelets (GNP) and multi-walled carbon nanotubes (MWCNT), using a microwave-assisted green synthesis route, employing fenugreek () seed extract as a gelling agent. The synthesised nanocomposites were systematically analyzed using XRD, FT-IR, Raman spectroscopy, HR-SEM and HR TEM analysis to assess structural, optical, and morphological properties.
View Article and Find Full Text PDFInfluence of Ni on carbon nanotube production with Fe-based catalysts.
Chem Commun (Camb)
January 2025
Department of Chemical Engineering, IIT Delhi, New Delhi-110016, India.
This study investigates the role of Ni in CNT production using Fe-based catalysts. Among the various catalysts used, such as 40Fe-0Ni, 40Fe-1Ni, 40Fe-3Ni, 40Fe-5Ni, 40Fe-7Ni, and 40Fe-10Ni, the 40Fe-5Ni catalyst achieved a notable yield of 5.80 gC per g metal, which is higher than the 1.
View Article and Find Full Text PDFA self-sustained moist-electric generator with enhanced energy density and longevity through a bilayer approach.
Mater Horiz
January 2025
College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu 610065, P. R. China.
Although MEG is being developed as a green renewable energy technology, there remains significant room for improvement in self-sustained power supply, generation duration, and energy density. In this study, we present a self-sustained, high-performance MEG device with a bilayer structure. The lower hydrogel layer incorporates graphene oxide (GO) and carbon nanotubes (CNTs) as the active materials, whereas the upper aerogel layer is comprised of pyrrole-modified graphene oxide (PGO).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!