AI Article Synopsis

  • In biomineralization, organisms control calcium carbonate crystallization to create functional materials and stabilize the most suitable phases for specific needs.
  • Transient amorphous calcium carbonate (ACC) is regulated by an organic matrix, allowing it to act as either an intermediate storage or a stable structural component.
  • This study demonstrates that in simple abiotic systems, high pH calcium carbonate precipitation is influenced by sodium silicate, which forms silica layers on ACC, altering its growth and delaying its transformation into calcite for extended periods.

Article Abstract

In biomineralization, living organisms carefully control the crystallization of calcium carbonate to create functional materials and thereby often take advantage of polymorphism by stabilizing a specific phase that is most suitable for a given demand. In particular, the lifetime of usually transient amorphous calcium carbonate (ACC) seems to be thoroughly regulated by the organic matrix, so as to use it either as an intermediate storage depot or directly as a structural element in a permanently stable state. In the present study, we show that the temporal stability of ACC can be influenced in a deliberate manner also in much simpler purely abiotic systems. To illustrate this, we have monitored the progress of calcium carbonate precipitation at high pH from solutions containing different amounts of sodium silicate. It was found that growing ACC particles provoke spontaneous polymerization of silica in their vicinity, which is proposed to result from a local decrease of pH nearby the surface. This leads to the deposition of hydrated amorphous silica layers on the ACC grains, which arrest growth and alter the size of the particles. Depending on the silica concentration, these skins have different thicknesses and exhibit distinct degrees of porosity, therefore impeding to varying extents the dissolution of ACC and energetically favored transformation to calcite. Under the given conditions, crystallization of calcium carbonate was slowed down over tunable periods or completely prevented on time scales of years, even when ACC coexisted side by side with calcite in solution.

Download full-text PDF

Source
http://dx.doi.org/10.1021/ja106959pDOI Listing

Publication Analysis

Top Keywords

calcium carbonate
20
amorphous calcium
8
crystallization calcium
8
acc
6
calcium
5
carbonate
5
stabilization amorphous
4
carbonate inorganic
4
inorganic silica-rich
4
silica-rich environments
4

Similar Publications

Enhanced mechanical properties of alkali-activated dolomite dust emulsified asphalt composites.

Sci Rep

December 2024

School of Civil Engineering, Architecture and Environment, Hubei University of Technology, Wuhan, China.

The dolomite dust-emulsified asphalt composite (DAC) with excellent mechanical properties was successfully prepared using alkali activation. The effects of different alkali concentrations and emulsified asphalt contents on the mechanical properties of the materials were studied. And the micro-mechanisms of its mechanical performance changes were analyzed through SEM and XRD characterization.

View Article and Find Full Text PDF

Because a significant portion of oil remains in carbonate reservoirs, efficient techniques are essential to increase oil recovery from carbonate reservoirs. Wettability alteration is crucial for enhanced oil recovery (EOR) from oil-wet reservoirs. This study investigates the impact of different substances on the wettability of dolomite and calcite rocks.

View Article and Find Full Text PDF

Boring bryozoans dissolve calcium carbonate substrates, leaving unique borehole traces. Depending on the shell type, borehole apertures and colony morphology can be diagnostic for distinguishing taxa, but to discriminate among species their combination with zooidal morphology is essential. All boring (endolithic) bryozoans are ctenostomes that, along with other boring taxa, are common in benthic communities.

View Article and Find Full Text PDF

Compression and water retention behavior of saline soil improved by MICP combined with activated carbon.

Sci Rep

December 2024

Department of Civil and Smart Construction Engineering, Shantou University, Shantou, 515063, Guangdong, China.

Saline soil is widely distributed in China and poses significant challenges to engineering construction due to its harmful effects, such as salt heaving, dissolution collapse, and frost heaving. The Microbial-Induced Calcite Precipitation (MICP) method is an emerging environmental-friendly modification that can reduce or eliminate the environmental and engineering hazards of saline soil. To verify the feasibility of the MICP method for improving the properties of saline soil, laboratory tests were conducted to study the effects of salt content, activated carbon content and freeze-thaw cycles on the compression and water retention behavior of MICP modified saline soil.

View Article and Find Full Text PDF

In the course of pipe jacking construction, the carrying-soil effect frequently arises, influenced by factors such as excavation unloading, ongoing disturbance from successive pipe sections, and the progressive accumulation of soil adhesion. The pipe jacking slurry serves as a critical agent for friction reduction and strata support, essential for the secure advancement of the construction process. This study introduces the Microbial-Induced Calcium Carbonate Precipitation (MICP) technology into the realm of pipe jacking slurry, aiming to enhance its friction-reduction capabilities and the stability of the soil enveloping the pipe.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!