Environmental concern regarding the use of toxic preservatives such as chromated copper arsenate (CCA) has been put forward. In the European Union, United States, and Japan, CCA has been phased out for residential and water-contact applications. Ecotoxicological studies of wood treated with conventional preservatives were carried out in the late 1990s, and it was concluded that the main impact is to water and aquatic organisms. Today, alternatives to conventional preservation methods, marketed as "environmentally friendly" or "nontoxic," are emerging. Examples of such alternatives are modified wood, e.g., thermally modified, furfurylated, and acetylated wood. To date, not enough hazard characterization has been performed. In the present study, the Microtox assay with the marine bacterium Vibrio fischeri and the Daphtox procedure with the crustacean Daphnia magna were used as screening methods in an effect assessment. Both organisms were exposed to water leachates from furfurylated wood using two different leaching procedures. The results indicate that Microtox is more sensitive to the toxic components from furfurylated wood than Daphtox. Furthermore, the toxicity of treated Pinus radiata was higher than that of treated Pinus sylvestris. The toxicity did not diminish over the test period, as is the case for preservative-treated wood. The present study found that treatment conditions can influence the toxicity considerably, so toxicity studies should be included in the development of new treatment process. The present study also shows that using an intermediate vacuum-drying step, leading to a more efficient curing/polymerization, results in slightly less hydrophobic oligomers in the product, such that the leachates become less toxic to bacteria.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/etc.132 | DOI Listing |
ACS Omega
December 2024
Vehicle Safety Institute, Graz University of Technology, Inffeldgasse 13/6, 8010 Graz, Austria.
In the pursuit of sustainable engineering solutions, material selection is increasingly directed toward resources that offer functional efficacy, economic feasibility, and minimal environmental impact. To replace environmentally damaging materials like aluminum with more sustainable alternatives like wood-based materials, it is essential to improve the durability and longevity of wood. This study explores the potential suitability of modified veneers as an outer protective layer for unmodified wooden load-bearing elements, providing a cost-effective and resource-efficient alternative to bulk modification.
View Article and Find Full Text PDFPolymers (Basel)
April 2023
LERMAB (Laboratoire d'Etudes et de Recherche sur le Matériau Bois), Université de Lorraine, INRAE, 54000 Nancy, France.
This article presents the effect of the addition of condensed tannins, used as a reticulation agent, on the polymerization of furfuryl alcohol during wood furfurylation, as well as the effect of these condensed tannins on the thermal stability of modified wood. Three kinds of dicarboxylic acids (adipic acid, succinic acid, and tartaric acid), as well as glyoxal, used as model of a wood reticulation agent, were used to catalyze the polymerization of furfuryl alcohol or tannin-furfuryl alcohol solutions. Impregnation of furfuryl alcohol or tannin-furfuryl alcohol solution into the wood, followed by curing at 103 °C for a specific duration, was performed for the wood modification.
View Article and Find Full Text PDFPolymers (Basel)
October 2022
Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, China.
Fast-growing wood has become a major source of materials for the wood industry in recent years, but defects have limited its use. Therefore, modification is urgently needed for the more efficient application of wood products. In this study, a 30 to 50% solution of furfuryl alcohol (FA) was impregnated into Douglas fir sapwood.
View Article and Find Full Text PDFPolymers (Basel)
April 2022
Wood Science and Engineering, Department of Engineering Sciences and Mathematics, Luleå University of Technology, SE-931 77 Skelleftea, Sweden.
Guanyl-urea phosphate (GUP) was introduced into furfurylated wood in order to improve fire retardancy. Modified wood was produced via vacuum-pressure impregnation of the GUP-furfuryl alcohol (FA) aqueous solution, which was then polymerized at elevated temperature. The water leaching resistance of the treated wood was tested according to European standard EN 84, while the leached water was analyzed using ultra-performance liquid chromatography (UPLC) and inductively coupled plasma-sector field mass spectrometry (ICP-SFMS).
View Article and Find Full Text PDFPolymers (Basel)
March 2022
School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China.
There is increasing interest in furfurylated wood, but the polymerization mechanism between its internal polyfurfuryl alcohol (PFA) and lignin is still uncertain. This paper investigated the distribution of PFA and the feasibility of the polymerization of PFA with lignin in furfurylated balsa wood. The wood first immersed in the furfuryl alcohol (FA) solution followed by in situ polymerization and the distribution of PFA was characterized by Raman, fluorescence microscopy, SEM, and CLSM.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!