A high-power linear ultrasonic motor using longitudinal vibration transducers with single foot.

IEEE Trans Ultrason Ferroelectr Freq Control

State Key Laboratory of Robotics and System, Harbin Institute of Technology, Harbin, Heilongjiang Province, China.

Published: August 2010

A high-power linear ultrasonic motor using longitudinal vibration transducers with single foot was proposed in this paper. The stator of proposed motor contains a horizontal transducer and a vertical transducer. Longitudinal vibrations are superimposed in the stator and generate an elliptical trajectory at the driving foot. The sensitivity analysis of structural parameters to the resonance frequencies of two working modes of the stator was performed using the finite element method. The resonance frequencies of two working modes were degenerated by adjusting the structural parameters. The vibration characteristics of stator were studied and discussed. A prototype motor was fabricated and measured. Typical output of the prototype is a no-load speed of 1160 mm/s and maximum thrust force of 20 N at a voltage of 200 V(rms).

Download full-text PDF

Source
http://dx.doi.org/10.1109/TUFFC.2010.1625DOI Listing

Publication Analysis

Top Keywords

high-power linear
8
linear ultrasonic
8
ultrasonic motor
8
motor longitudinal
8
longitudinal vibration
8
vibration transducers
8
transducers single
8
single foot
8
structural parameters
8
resonance frequencies
8

Similar Publications

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!