To assess the stability of osteosynthesis in diacapitular condylar fractures we compared fixation using ultrasound-aided resorbable pins with poly-(D,L)-lactide (SonicWeld® Rx, KLS Martin, Tuttlingen, Germany) with that of titanium screws in 20 pig mandibles, 10 in each group. Isolated diacapitular fractures were created using a surgical chisel. Ten fractures were each repositioned and fixed by two pins (17 and 11 mm long, 2.1mm in diameter), and 10 fractures were fixed by two titanium screws of equal length, 2.0mm in diameter. Shear tests were done immediately after treatment to measure the maximum force to disrupt the fixation. Fixation with pins resisted mean shear forces of 310N until the pins fractured, whereas fixation with titanium screws failed at 918N when the screws pulled out of the bone. Long-term stability and resorption of pins will have to be analysed in an in vivo study.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.bjoms.2010.05.001 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Role of Posterior Carbon Fiber Implants in Spine Tumor Surgery.
Global Spine J
January 2025
Department of Orthopedics, IRCCS Galeazzi Orthopaedic Institute, Milan, Italy.
Study Design: Narrative Review.
Objective: The management of spinal tumors requires a multi-disciplinary approach including surgery, radiation, and systemic therapy. Surgical approaches typically require posterior segmental instrumentation to maintain long-term spinal stability.
Treatment of a collapse fracture of the anterolateral tibial plateau with a lateral locking plate and the Jail screw technique.
BMC Surg
January 2025
Department of Orthopedics, Nanjing Drum Tower Hospital Group Suqian Hospital, Suqian, China.
Background: To explore the advantages of a lateral tibial locking plate combined with Jail screw fixation in the treatment of anterolateral tibial plateau collapse fracture (ATPCF).
Methods: A retrospective analysis was conducted on patients with ATPCFs admitted to our hospital from February 2019 to February 2023. Twenty-six patients were successfully included, including 15 males and 11 females, with an average age of 58.
Finite element investigation for improving chest wall reconstruction process using ceramic and polymeric implants.
Sci Rep
January 2025
Biomedical Engineering Department, Faculty of Engineering, Helwan University, Cairo, Egypt.
Car accidents, infections caused by bacteria or viruses, metastatic lesions, tumors, and malignancies are the most frequent causes of chest wall damage, leading to the removal of the affected area. After excision, artificial bone or synthetic materials are used in chest wall reconstruction to restore the skeletal structure of the chest. Chest implants have traditionally been made from metallic materials like titanium alloys due to their biocompatibility and durability.
View Article and Find Full Text PDFLoad-bearing capacity of screw-retained fixed dental prostheses made of monolithic zirconia on different abutment designs and abutment-free implant connection.
J Dent
January 2025
Senior Research and Teaching Assistant, Clinic of Reconstructive Dentistry, Center for Dental Medicine, University of Zurich, Plattenstrasse 11, Zurich 8032, Switzerland. Electronic address:
Objectives: A new abutment-free implant connection allows for direct screwing of FDPs on implants to avoid complications caused by cement rests or screw loosening, which may affect to screw torque and load distribution. The objective of this study was to test the initial (Fi) and final failure (Ff) loads and torque changes of abutment-free monolithic zirconia CAD-CAM fixed dental prostheses (FDPs) compared to titanium FDPs on different abutment designs.
Methods: Three-unit screw-retained FDPs (n = 50) on two implants (n = 100) were divided into groups (n = 10) based on the implant-abutment connection and material of the supra-structure: (1) abutment-free monolithic CAD-CAM zirconia FDP (Abut-free-Zr), (2) abutment-free veneered titanium FDPs (Abut-free-Ti), (3) monolithic zirconia FDPs with titanium base abutments (Zr-Ti-Base), (4) monolithic zirconia FDPs on multi-unit abutments (Zr-MU), (5) veneered titanium FDP on multi-unit abutments (Ti-MU).
Clinical applications of 3D printing in spine surgery: a systematic review.
Eur Spine J
January 2025
In Silico Biomechanics Laboratory, National Center for Spinal Disorders, Buda Health Center, Budapest, Hungary.
Purpose: The objective of this systematic review is to present a comprehensive summary of existing research on the use of 3D printing in spinal surgery.
Methods: The researchers conducted a thorough search of four digital databases (PubMed, Web of Science, Scopus, and Embase) to identify relevant studies published between January 1999 and December 2022. The review focused on various aspects, including the types of objects printed, clinical applications, clinical outcomes, time and cost considerations, 3D printing materials, location of 3D printing, and technologies utilized.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!